Effect of Excess Al in TiO2-Al Powder Mixture and Susceptor Material on Microwave Synthesis of TiAl/Al2O3 Composite

1. Westbrook, J.H. and Flieischer, R.L., Intermetallic Compounds– Principles & Practice, John Wiley & Sons, Vol. 2, 2002.
2. Djanarthany, S., Viala, J. and Bouix, J., “An Overview of Monolithic Titanium Aluminides Based on Ti3Al and TiAl”, Materials Chemistry and Physics,
Vol. 72, pp. 301-319, 2001.
3. Ward-Close, C.M., Minor, R. and Doorbar, P.J., “Intermetallic-Matrix Composites– A Review”, Intermetallics, Vol. 4, pp. 217-229, 1996.
4. Travitzky, N., Gotman, I. and Claussen, N., “Alumina–Ti Aluminide Interpenetrating Composites: Microstructure and Mechanical Properties”, Materials Letters, Vol. 57, pp. 3422–3426, 2003.
5. Zhang, D.L., Cai, Z.H. and Adam, G., “The Mechanical Milling of Al/TiO2 Composite Powders”, JOM, Vol. 18, pp. 94–98, 2003.
6. Khatri, S. and Koczak, M., “Formation of TiC in In Situ Processed Composites via Solid-Gas, Solid-Liquid and Liquid-Gas Reaction in Molten A1-Ti”, Materials Science and Engineering A, Vol. 162,
pp. 153–162, 1993.
7. Vaucher, S., Stir, M., Ishizaki, K., Catala-Civera, J. M. and Nicula, R., “Reactive Synthesis of Ti-Al Intermetallics During Microwave Heating in an E-Field Maximum”, Thermochimica Acta, Vol. 522,
pp. 151–154, 2011.
8. Morsi, K., “Review: Reaction Synthesis Processing of Ni–Al Intermetallic Materials”, Materials Science and Engineering A, Vol. 299, pp. 1–15, 2001.
9. Yi, H.C., Moore, J.J., “Self-Propagating High-Temperature (Combustion) Synthesis (SHS) of Powder-Compacted Materials”, Journal of Materials Science, Vol. 25, pp.1159-1168, 1990.
10. Subrahmanyam, J. and Vijayakumar, M., “Review- Self-Propagating High-Temperature Synthesis”, Journal of Materials Science, Vol. 27, pp. 6249–6273, 1992.
11. Suryanarayana, C., Non-Equilibrium Processing of Materials, Chapter 11, Elsevier, UK, 1999.
12. Suryanarayana, C., Ivanov, E. and Boldyrev, V.V., “The Science and Technology of mechanical alloying”, Materials Science and Engineering A,
Vol. 304–306, pp. 151–158, 2001.
13. Kamali, A.R. and Fahim, J., “Mechanically Activated Aluminothermic Reduction of Titanium Dioxide”, International Journal of Self-Propagating High-Temperature Synthesis, Vol. 18, pp. 7–10, 2009.
14. Lekse, J.W., Stagger, T.J. and Aitken J.A., “Microwave Metallurgy: Synthesis of Intermetallic Compound via Microwave Irradiation”, Chemistry of Materials, Vol. 19, pp. 3601–3603, 2007.
15. Gopta, M., Microwave Processing of Materials, The National Academy Press, USA, 1994.
16. Samouhos, M., Hutcheon, R., and Paspaliaris, I., “Microwave Reduction of Copper(II) Oxide and Malachite Concentrate”, Minerals Engineering,
Vol. 24, pp. 903–913, 2011.
17. Pickles, C.A., “Microwaves in Extractive Metallurgy: Part 1– Review of Fundamentals”, Minerals Engineering, Vol. 22, pp. 1102–1111, 2009.
18. Lu, L. and Zhang, Y.F., “Influence of Process Control Agent on Interdiffusion Between Al and Mg during Mechanical Alloying”, Journal of Alloys and Compounds, Vol. 290, pp. 279–283, 1999.
19. Roy, R., Agrawal, D., Cheng, J. and Gedevanishvili, S., “Full Sintering of Powdered-Metal Bodies in a Microwave Field”, Nature, Vol. 399, pp. 668–670, 1999.
20. Ku, H., Siores, E., Taube, A. and Ball, J.A., “Productivity Improvement Through the Use of Industrial Microwave Technologies”, Computers & Industrial Engineering, Vol. 42, pp. 281–290, 2002.
21. Gupta, M. and Wai Leang, W., Microwaves and Metals, John Wiley & Son, pp. 26–175, 2007.
22. Ying, D.Y., Zhang, D.L. and Newby, M., “Solid-State Reactions during Heating Mechanically Milled Al/TiO2 Composite Powders”, Metallurgical & Materials Transactions A, Vol. 35, pp. 2115–2125, 2004.
23. Orru, R., Cao, G. and Munir, Z.A., “Mechanistic Investigation of the Field-Activated Combustion Synthesis (FACS) of Titanium Aluminides”, Chemical Engineering Science, Vol. 54, pp. 3349–3355, 1999.
24. Horvitz, D., Gotman, I., Gutmanas, E.Y. and Claussen, N., “In Situ Processing of Dense Al2O3- Ti Aluminide Interpenetrating Phase Composites”, Journal of the European Ceramic Society, Vol. 22, pp. 947–954, 2002.
25. Yeh, C.L. and Li, R.F., “Formation of TiAl-Ti5Si3 and TiAl-Al2O3 In Situ Composites by Combustion Synthesis”, Journal of Alloys and Compounds,
Vol. 16, pp. 64–70, 2008.
26. Alamolhoda, S., Heshmati-Manesh, S. and Ataie, A., “Role of Intensive Milling in Mechano-Thermal Processing of TiAl/Al2O3”, Advanced Powder Technology, Vol. 23, pp. 343–348, 2012.
27. Ghafurian, S., Seyedein, S.H., Aboutalebi, M.R. and Afshar, M.R., “Numerical Modeling of Combustion Synthesis of TiAl/Al2O3 Composite via Microwave Heating”, Iranian Journal of Materials Science & Engineering, Vol. 8, pp. 8–16, 2011.
28. Welham, N.J., “Mechanical Activation of the Formation of an Alumina-Titanium Trialuminide Composite”, Intermetallics, Vol. 6, pp. 363–368, 1998.