Effect of Stone-Wales Defect on Ultimate Strength of Carbon Nanotubes

1. Yu, M.F., Lourie, O., Dyer, M.J., Moloni, K., Kelly, T.F. and Ruoff, R.S., “Strength and Breaking Mechanism of Multiwalled Carbon Nanotubes under Tensile Load”, Science, Vol. 287, pp. 637-640, 2000.
2. Belytschko, T. and Xiao, S.P., “Coupling Methods for Continuum Model with Molecular Model”, Multi Scale Computational Engineering, Vol. 1, pp. 115–126, 2003.
3. Zhang, P., Huang, Y., Geubelle, P.H., Klein, P. and Hwang, K.C., “The Elastic Modulus of Single Wall Carbon Nanotubes: Continuum Analysis Incorporating Interatomic Potentials”, Solid Structure, Vol. 39, pp. 3893-3906, 2002.
4. Li, C. and Chou, T.W., “A Structural Mechanics Approach for the Analysis of Carbon Nanotubes”, International Journal of Solids and Structures,
Vol. 40, pp. 2487–2499, 2003.
5. Xiao, J.R., Staniszewski, J. and Gillespie Jr, J.W., “Fracture and Progressive Failure of Defective Graphene Sheets and Carbon Nanotubes”, Composite Structures, Vol. 88, pp. 602–609, 2009.
6. Rossi, M. and Meo, M., “Tensile Failure Prediction of Single Wall Carbon Nanotube”, Engineering Fracture Mechanics, Vol. 73, pp. 2589–2599, 2006.
7. Tserpes, K.I., Papanikos, P. and Tsirkas, S.A., “A Progressive Fracture Model for Carbon Nanotubes”, Composites: Part B, Vol. 37, pp. 662–669, 2006.
8. Zakeri, M. and Shayanmehr, M., “On the Mechanical Properties of Chiral Carbon Nanotubes”, Journal of Ultrafine Grained and Nanostructured Materials, Vol. 46, No. 1, pp. 1-9, 2013.
9. Muhammad, I.D., Awang, M., Mamat, O. and Ku Shaari, K.Z., “Estimating Young’s Modulus
of Single-Walled Zirconia Nanotubes using Nonlinear Finite Element Modeling”, Journal of Nanomaterials, Vol. 2015, pp. 1-9, 2015.
10. Lee, J.H. and Lee, B.S., “Modal Analysis of Carbon Nanotubes and Nanocones using FEM”, Journal of Computational Materials Science, Vol. 51, pp. 30-42, 2012.
11. Odegard, G.M., Gates, T.S., Nicholson, L.M. and Wise, K.E., “Equivalent Continuum Modeling of Nano-Structured Materials”, Composites Science and Technology, Vol. 62, pp. 1869–80, 2002.
12. Belytschko, T., Xiao, S.P., Schatz, G.C. and Ruoff, R.S., “Atomistic Simulations of Nanotube Fracture”, Physical Review B, Vol. 65, pp. 1-12, 2002.
13. Rossi, M. and Meo, M., “On the Estimation of Mechanical Properties of Single walled Carbon Nanotubes by Using a Molecular-Mechanics Based FE Approach”, Composites Science and Technology,
Vol. 69, pp. 1394–1398, 2009.
14. Ogata, S. and Shibutani, Y., “Ideal Tensile Strength and Band Gap of Single-Walled Carbon Nanotubes”, Physical Review B, Vol. 68, pp. 1-4, 2003.
15. Jeng, Y.R., Tsai, P.C. and Fang, T.H., “Effects of Temperature and Vacancy Defects on Tensile Deformation of Single-Walled Carbon Nanotubes”, Journal of Physics and Chemistry of Solids, Vol. 65, pp. 1849–1856, 2004.
16. Khare, R., Mielke, S.L., Paci, J.T., Zhang, S., Ballarini, R., Schatz, G.C. and Belytschko, T., “Coupled Quantum Mechanical/Molecular Mechanical Modeling of the Fracture of Defective Carbon Nanotubes and Graphene Sheets”, Physical Review B, Vol. 75, 075412, 2007.