1. Ashby, M.F., Evans, A., Fleck, N.A., Gibson, L.J., Hutchinson, J.W., and Wadley, H.N.G., “Metal Foams-A Design Guide”, Butterworth-Heinemann, London, 2000.
2. Banhart, J., “Manufacture, Characterization and Application of Cellular Metals and Metallic Foams”, Progress in Material Science, Vol. 46, pp. 559-632, 2001.
3. Degischer, H.P., and Kriszt, B., “Handbook of cellular metals”, Weinheim, Wiley-VCH, 2002.
4. Nakamura, T., Gnyloskurenko, S., Sakamoto, K., Byakova, A.V., and Ishikawa, R., “Development of New Foaming Agent for Metal Foam”, Materials Transactions, Vol. 43, pp. 1191-1196, 2002.
5. Fusheng, H., Jianning, W., Hefa, C., and Junchang, G., “Effects of Process Parameters and Alloy Compositions on the Pore Structure of Foamed Aluminum”, Journal of Materials Processing Technology, Vol. 138, pp. 505-507, 2003.
6. Song, Z., and Nutt, S.R., “Rheology of Foaming Aluminum Melts”, Materials Science and Engineering A, Vol. 458, pp. 108-115, 2007.
7. Da-wu, L., Jie, L., Tao, L., Ting, S., Xiao-ming, Z., and Guang-chun, Y., “Preparation and Characterization of Aluminum Foams with ZrH2 as Foaming Agent”, Transactions of Nonferrous Metals Society of China, Vol. 21, pp. 346-352, 2011.
8. Papadopoulos, D.P., Omar, H., Stergioudi, F., Tsipas, S.A., and Michailidis, N., “The Use of Dolomite as Foaming Agent and its Effect on the Microstructure of Aluminium Metal Foams-Comparison to Titanium Hydride”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 382, pp. 118-123, 2011.
9. Lázaro, J., Solórzano, E., and Rodríguez-Pérez, M.A., “Alternative Carbonates to Produce Aluminium Foams via Melt Route”, Procedia Materials Science, Vol. 4, pp. 275-280, 2014.
10. Byakova, A., Kartuzov, I., Nakamura, T., and Gnyloskurenko, S., “The Role of Foaming Agent and Processing Route in Mechanical Performance of Fabricated Aluminum Foams”, Procedia Materials Science, Vol. 4, pp. 109-114, 2014.
11. Gergely, V., Curran, D.C., and Clyne, T.W., “The FOAMCARP Process: Foaming of Aluminium MMCs by the Chalk-Aluminium Reaction in Precursors”, Composites Science and Technology, Vol. 63, pp. 2301-2310, 2003.
12. Golestanipour, M., Amini Mashhadi, H., Abravi, M.S., Malekjafarian, M., and Sadeghian, M.H., “Manufacturing of Al/SiCp Composite Foams Using Calcium Carbonate as Foaming Agent”, Materials Science and Technology, Vol. 27, pp. 923-927, 2011.
13. Gui, M.C., Wang, D.B., Wu, J.J., Yuan, G.J., and Li, C.G., “Deformation and Damping Behaviors of Foamed Al-Si-SiCp Composite”, Materials Science & Engineering A, Vol. 286, pp. 282-288, 2000.
14. Gibson, L.J., and Ashby, M.F., “Cellular Solids: Structures and Properties”, 2nd edition, Cambridge: Cambridge University Press, 1997.
15. Ramamury, U., and Kumaran, M.C., “Mechanical Property Extraction through Conical Indentation of a Closed-Cell Aluminum Foam”, Acta Materialia,
Vol. 52, pp. 181-189, 2004.
16. Luo, Y., Yu, S., Li, W., Liu, J., and Wei, M., “Compressive Behavior of SiCp/AlSi9Mg Composite Foams”, Journal of Alloys and Compounds,
Vol. 460, pp. 294-298, 2008.
17. Yu, S., Luo, Y., and Liu, J., “Effects of Strain Rate and SiC Particle on the Compressive Property of SiCp/AlSi9Mg Composite Foams”, Materials Science and Engineering A, Vol. 487, pp. 394-399, 2008.
18. Esmaeelzadeh, S., Simchi, A., and Lehmhus, D., “Effect of Ceramic Particle Addition on the Foaming Behavior, Cell Structure and Mechanical Properties of P/M AlSi7 Foam”, Materials Science and Engineering A,Vol. 424, pp. 290-299, 2006.
19. Xia, X., Zhang, Z., Wang, J., Zhang, X., Zhao, W., Liao, B., and Hur, B., “Compressive Characteristics of Closed-Cell Aluminum Foams after Immersion in Simulated Seawater”, Materials and Design, Vol. 67, pp. 330-336, 2015.
20. Crupi, V., Kara, E., Epasto, G., Guglielmino, E., and Aykul, H., “Prediction Model for the Impact Response of Glass Fiber Reinforced Aluminium Foam Sandwiches”, International Journal of Impact Engineering, Vol. 77, pp. 97-107, 2015.
', './data/jame/coversheet/cover_en.jpg'))
