Investigation of Hot Deformation Behavior of 321 Stainless Steel using Hot Compression Test and Modeling with Constitutive Equations

1. Totten, G. E., Steel Heat Treatment Handbook, 2nd Edition, pp. 694-739, Taylor and Francis group, NewYork, 2007.
2. Comstock, G. F., Titanium in Steel, pp. 238-352, Pitman Metallurgy Series, NewYork, 1949.
3. Cobb, H. M., Stainless Steels, pp. 23-203, Iron and Steel Society, Warrendale, 1999.
4. Zhang, W., and Wen, Y., “Characterization of Different Work Hardening Behavior in AISI321 Stainless Steel and Hadfield Steel”, Springer Science and Business Media, Vol. 25, pp. 3433-3437, 2010.
5. Park, W. S., Yoo, S. W., Kim, M. H., and Lee, J. M., “Strain-Rate Effects on the Mechanical Behavior of AISI 300 Series of Austenitic Stainless Steel under Cryogenic Environments”, Materials and Design Journal, Vol. 35, pp. 3630-3640, 2010.
6. Ryan, N. D., and Mcqueen, H. J., “Dynamic Softening Mechanisms in 304 Austenitic Stainless Steel”, Canadian Metallurgical Quarterly, Vol. 29, pp. 550-565, 1990.
7. Poliak, E. I., and Jonas, J. J., “Initiation of Dynamic Recrystallization in Constant Strain Rate Hot Deformation”, ISIJ International, Vol. 43, pp. 684-691, 2003.
8. Poliak, E. I., and Jonas, J. J., “A One-Parameter Approach to Determining the Critical Conditions for the Initiation of Dynamic Recrystallization”, Acta Materialia, Vol. 44, pp. 127-136, 1996.
9. Najafizadeh, A, and Jonas, J. J, “Predicting of the Critical Stress for Initiation of Dynamic Recrystallization”, ISIJ International, Vol. 46, pp. 1679-1684, 2006.
10. ASTM Designation E9, “Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature”, p. 10, USA, 2004.
11. Prasad, Y. V. R. K, Hot Working Guide, ASM International, pp. 262-342, Ohio, 1997.
12. Chandler, H., Heat Treater's Guide: Practice and Procedure for Irons and Steels, ASM International, pp. 724-758, Ohio, 1995.
13. Vander Voort, F. G., and Lucas, G. M., Metallography and Microstructures of Stainless Steels and Maraging Steels, Metallography and Microstructures, ASM Hand Books, ASM International, Vol. 9, pp. 670-700, 2004.
14. Mirzadeh, H., and Najafizade, A., “Extrapolation of Flow Curves at hot Working Conditions”, Material Science and Engineering, Vol. 572, pp. 1856-1860, 2010.
15. Ebrahimi, R., and Najafizade, A., “A New Method for Evaluation of Friction in Bulk Metal Forming”, Material Processing Technology, Vol. 152, pp. 136-143, 2004.
16. Jafari, M., and Najafizadeh, A., “Correlation between Zener-Holloman Parameter and Necklace Drx during Hot Deformation of 316 Stainless Steel”, Material Science and Engineering, Vol. 25, pp. 16-25, 2009.
17. McQueen, H. C., and Ryan, N. D., “Constitutive Analysis in Hot Working”, Material Science and Engineering Journal, Vol. 25, pp. 43-63, 1985.
18. Kim, S., and Yoo, Y. C., “Dynamic Recrystallization Behavior of AISI 304 Stainless Steel”, Material Science and Engineering, Vol. 25, pp. 108-113, 2001.
19. Havela, L., Kratochvil, P., Lukac, P., Smola, B., and Svobodova, A., “Softening During and After the Hot Deformation of the AISI321 With Respect to Practical Applications”, Ph.D. Thesis, Department Of Metal Physic, Charles University, Prague, pp. 384-388, 1988.
20. Mirzadeh, H., and Najafizade, A., “Prediction of Critical Conditions for Initiation of Dynamic Recrystallization”, Materials and Design, Vol. 31, pp. 1174-1179, 2010.