Evaluation of the Microstructure of Ni-Nb-Si Alloy During Mechanical Alloying

Authors

1 1. Department of Metallurgy and Materials Science, Shahid Bahonar University of Kerman, Kerman, Iran.

2 2. Department of Material Engineering, Isfahan University of Technology, Isfahan, Iran.

Abstract

In the present study, the mechanical alloying process was used to produce the Ni-Nb-Si amorphous alloy. X-ray diffraction (XRD)analysis and high-resolution transmission electron microscopy (HRTEM) were used to approve the amorphous phase formation after 12 hours of mechanical alloying. The results obtained from the SEM morphological images of powder particles during mechanical alloying showed that increasing the milling time caused the reduction  of the powder particles size and uniformity in the shape of the particles. Enhancing the embrittlement and fracturing rate caused brittleness and the  increase in the  failure rate; these were followed by a decrease in the powder particle size to 1-5μm. Cold welding and flattening of the pure elemental powders after mechanical alloying for 2 hours formed a lamellar structure of the alternative layers of different elements lying over each other. SEM image of cross-section of powder particles showed that by increasing the milling time, the interlamellar spacing was decreased, the elements were distributed more uniformly, and finally, a uniform structure of theamorphous phase was completed.

Keywords

References

3. Guo, S. F., Pan, F. S., Zhang, H. J., Zhang, D. F., Wang, J. F., Miao, J., Su, C., and Zhang, C., “Fe-based Amorphous Coating for Corrosion Protection of Magnesium Alloy”, Materials and Design, Vol. 108, pp. 624-631, 2016.
4. Sharma, S., and Suryanarayana, C., “Effect of Nb on the Glass-Forming Ability of Mechanically Alloyed Fe–Ni–Zr–B Alloys”, Scripta Materialia, Vol. 58, pp. 508-511, 2008.
5. Enayati, M. H., Schumacher, P., and Cantor, B., “Amorphization of Ni60Nb20Zr20 by Mechanical Alloying”, Materials Science and Engineering A, Vol. 375-377, pp. 812-814, 2004.
6. Déo, L. P., and de Oliveira, M. F., “Accuracy of a Selection Criterion for Glass Forming Ability in the Ni-Nb-Zr System”, Journal of Alloys and Compounds, Vol. 615, pp. S23-S28, 2014.
7. Enayati, M. H., and Mohamed, F. A., “Application of Mechanical Alloying/Milling for Synthesis of Nanocrystalline and Amorphous Materials”, International Materials Reviews, Vol. 59, pp. 394-416, 2014.
8. Suryanarayana, C., “Mechanical Alloying and Milling”, Progress in Materials Science, Vol. 46, pp. 1-184, 2001.
10. Inoue, A., “Stabilization of Metallic Supercooled Liquid and Bulk Amorphous Alloys”, Acta Materialia, Vol. 48, pp. 279-306, 2000.
11. Minouei, H., Akbari, G. H., Enayati, M. H., and Hong, S. I., “Amorphization and Nanocrystallization of Ni-Nb-Si Alloys”, Materials Science and Engineering A, Vol. 682, pp. 396-401, 2017.
12. Schumacher, P., Enayati, M. H., and Cantor, B., “Amorphization Kinetics of Ni60Nb40 During Mechanical Alloying”, Materials Science Forum, Vol. 312-314, pp. 351-356, 1999.
13. Enayati, M. H., “Crystallization Behavior of Ni-Nb Amorphous Alloys”, Scientia Iranica, Vol. 9, pp.157-161, 2002.
14. Shimada, T., Louzguine, D. V., Saida, J., and Inoue, A., “Thermal Stability and Devitrification Behavior of Ternary Ni-Nb-Ti and Quaternary Glassy Alloys Containing Noble Metals”, Materials Transactions, Vol. 46, pp. 675-680, 2005.
15. Choi-Yim, H., Xu, D., Lind, M. L., Loffler, J. F., and Johnson, W. L., “Structure and Mechanical Properties of Bulk Glass-Forming Ni-Nb-Sn Alloys”, Scripta Materialia, Vol. 54, pp. 187-190, 2006.
16. Lee, M., Bae, D., Kim, W., and Kim, D., “Ni-Based Refractory Bulk Amorphous Alloys with High Thermal Stability”, Materials Transactions, Vol. 44, pp. 2084-2087, 2003.
17. Korznikova, G., Czeppe, T., and Korznikov, A., “Structure and Properties of Ni-Based Amorphous Ribbons Consolidated by High Pressure Torsion”, Reviews on Advanced Materials Science, Vol. 25, pp. 67-73, 2010.
Journal of Advanced Materials in Engineering (Esteghlal)
Volume 37, Issue 1
June 2018
Pages 1-9

Files

Share

How to cite

Statistics

ارتقاء امنیت وب با وف ایرانی