The Formation of Al3Ti Intermetallic compound at the junction interface of Titanium-Aluminum diffusional Coupling by Means of Diffusional Annealing Process

1. Kuang, J. P., Harding, R. A., and Campbell, J., “Microstructures and Properties of Investment Castings of Gamma- titanium Aluminide”, Materials Science and Engineering, Vol. A329-331, pp. 31-37, 2002.
2. Nayak, S. S., Pabi, S. K., and Murty, B. S., “Al-(L12)Al3Ti Nanocomposites Prepared by Mechanical Alloying: Synthesis and Mechanical Properties”, Journal of Alloys and Compounds, Vol. 429, pp. 128-133, 2010.
3. Nayak, S. S., Pabi, S. K., Kim, D. H., and Murty, B. S., “Microstructure-hardness Relationship of Al-(L12)Al3Ti Nanocomposites Prepared by Rapid Solidification Processing”, Intermetallics, Vol. 18, pp. 487-492, 2010.
4. Naplocha, K., and Granat, K., “Microwave Activated Combustion Synthesis of Porous Al–Ti Structures for Composite Reinforcing”, Journal of Alloys and Compounds, Vol. 486, pp. 178-184, 2009.
5. Huashun, Y., Hongmei, C., Liming, S., and Guanghui, M., “Preparation of Al-A3Ti in Situ Composites by Direct Reaction Method”, Rare Metals, Vol. 25, pp. 32-36, 2006.
6. Mirjalili, M., Soltanieh, M., Matsuura, K., and Ohno, M., “On the Kinetics of TiAl3 Intermetallic Layer Formation in the Titanium and Aluminum Diffusion Couple”, Intermetallics, Vol. 32, pp. 297-302, 2013.
7. Thuillard, M., Tran, L. T., and Nicolet, M. A., “Al3Ti Formation by Diffusion of Aluminium Through Titanium”, Thin Solid Films, Vol. 166, pp. 21-27, 1988.
8. Bataev, I. A., Mali, V. I., and Pavliukova, D. V., “Structural and Mechanical Properties of Metallic–intermetallic Laminate Composites Produced by Explosive Welding and Annealing”, Materials & Design, Vol. 35, pp. 225-234, 2012.
9. Sujata, M., Bhargava, S., Suwas, S., and Sangal, S., “On Kinetics of TiAl3 Formation During Reaction Synthesis from Solid Ti and Liquid Al”, Journal of Materials Science Letters, Vol. 20, pp. 2207-2209, 2001.
10. Orru, R., Cao, G., and Munir, Z. A., “Mechanistic Investigation of the Field-activated Combustiuon Synthesis (FACS) of Titanium Aluminides”, Chemical Engineering Science, Vol. 54, pp. 3349-3355, 1991.
11. Luo, J. G., and Acoff, V. L., “Using Cold Roll Bonding and Annealing to Process Ti/Al Multi-Layered Composites from Elemental Foils”, Materials Science and Engineering A, Vol. 349, pp. 164-172, 2004.
12. Yang, R., Xu, L., and Cui, Y., “Growth of Intermetallic Layer in Multi-Laminated Ti/Al Diffusion Couples”, Materials Science and Engineering A, Vol. 345, pp. 638-647, 2006.
13. Wei, Y., Aiping, W., Guisheng, Z., and Jialie, R., “Formation Process of the Bonding Joint in Ti/Al Diffusion Bonding”, Materials Science and Engineering, Vol. 480, pp. 456-463, 2008.
14. Tavoosi, M., and Arjmand, A., “In Situ Formation of Al/Al3Ti Composite Coating on Pure Ti Surface by TIG Surfacing Process”, Surfaces and Interfaces, Vol. 8, pp. 1-7, 2017.
15. Tavoosi, M., Arjmand, A., and Adelimoghaddam, B., “Surface Alloying of Commercially Pure Titanium with Aluminum and Nitrogen using GTAW Processing”, Surface & Coatings Technology, Vol. 311, pp. 314-320, 2017.