Fabrication and Characterization of an Optical Nano-hybrid Sol-gel Derived Thin Film on the PMMA Substrate

Authors

Department of Materials Engineering, Maleke Ashtar University of Technology, Shahin Shahr, Iran.

Abstract

A TEOS-GPTMS nano-hybrid thin film was deposited on the polymethyl methacrylate (PMMA) substrate by a sol-gel dip coating method. Morphology, roughness and surface chemical bonding of the thin films were evaluated by X-ray diffraction (XRD), field emission scanning electron microscopy(FE-SEM), atomic force microscopy, and Fourier transform infrared spectroscopy methods, respectively. UV-vis spectrophotometer was used to measure the transmittance spectra of the samples. Also, the adhesion and hardness of the coatings were investigated using pencil hardness the adhesion tape test and the test, respectively. XRD results proved that the thin film had an amorphous structure. Also, FE-SEM images indicated that addition of GPTMS to the TEOS yielded a crack-free thin film. Based on the UV-vis spectroscopy results, the transmittance of the polymer substrate in the visible region was increased by the deposition of the nano-hybrid coating. Moreover, the hardness of the PMMA substrate was increased from 3H to 6H by the deposition of the nano-hybrid thin film.  Also, tape test confirmed the  high adhesion of the nano-hybrid thin film on the PMMA substrate. Consequently, the transparent organic-inorganic GPTMS-TEOS  hybrid coating can be used as a scratch resistant coating on the PMMA substrate.

Keywords

References

1. Wang, Y., Li, T., Li, S., and Sun, J., “Antifogging and Frost-Resisting Polyelectrolyte Coatings Capable of Healing Scratches and Restoring Transparency”, Chemistry Materials, Vol. 27, pp. 8058-8065, 2015.
2. Palavesam, N., Marin, S., Hemmetzberger, D., Landesberger, Ch., Bock, K., and Kutter, Ch., “Roll-to-roll Processing of Film Substrates for Hybrid Integrated Flexible Electronics”, Flexible and Printed Electronics, Vol. 3, pp. 014002, 2018.
3. Liang, Ch. H., Chau, J. L. H., Pan, A. I. T., Yang, Ch. Ch., and Shih, H. H., “Development of Hybrid Amorphous Barrier Coatings on Polymer Substrates”, Journal of Materials: Design and Applications, Vol. 230, pp. 569-573, 2016.
4. Zhang, Y., Magan, J. J., and Blau, W. J., “A General Strategy for Hybrid Thin Film Fabrication and Transfer onto Arbitrary Substrates”, Nature, pp. 1-5, 2014.
5. Song, K. Ch., Park, J. K., Kang, H. U., and Kim, S. H., “Synthesis of Hydrophilic Coating Solution for Polymer Substrate using Glycidoxypropyltrimethoxysilane”, Journal of Sol-gel Science and Technology, Vol. 27, No. 1, pp. 53-59, 2003.
6. Wu, L. Y., Boon, L., Chen, Z., and Zeng, X. T., “Adhesion Enhancement of Sol-gel Coating on Polycarbonate by Heated Impregnation Treatment”, Thin Solid Films, Vol. 517, pp. 4850-4856, 2009.
7. Chang, C. C., Lin, Z. M, Huang, S. H., and Cheng, L. P., “Preparation of Highly Transparent 13F-Modified Nano-Silica/Polymer Hydrophobic Hard Coatings on Plastic Substrates”, Journal of Applied Science and Engineering, Vol. 18, pp. 387-394, 2015.
8. Wright, J. D., and Sommer, N., Sol-gel Materials Chemistry and Applications, CRC Press, New York, 2001.
9. Wen, J., Wilkes, G. L., and Garth, L., “Organic/Inorganic Hybrid Network Materials by the Sol-gel Approach, Chemistry of Materials, Vol. 8, pp. 1667-1681, 1996.
10. Figueira, R. B., Fontinha, I. R., Silva, C. J. R., and Pereira, E. V., “Hybrid Sol-gel Coatings: Smart and Green Materials for Corrosion Mitigation”, Coatings, Vol. 6, pp. 1-19, 2016.
11. Duo, S., Li, M., Zhu, M., and Zhou, Y., “Polydimethylsiloxane/silica Hybrid Coatings Protecting Kapton from Atomic Oxygen Attack”, Materials Chemistry and Physics, Vol. 112, pp. 1093-1098, 2008.
12. Adelkhani, H., Mellatnavaz, B., Roohi, H., and Noorbakhsh, M., “New Sol Gel Solution with 45 Days Stability for Preparation Silica Thin Films”, Iran Journal of Chemistry and Chemical Engineering, Vol. 26, pp. 25-29, 2007.
13. Alvarado-Rivera, J., Munoz-Saldana, J., and Ramirez-Bon, R., “Nanoindentation Testing of SiO2-PMMA Hybrid Films on Acrylic Substrates with Variable Coupling Agent Content”, Journal of Sol-gel Science and Technology, Vol. 54, pp. 312-318, 2010.
14. Maghzian, A., Monshi, A., and Fathi, M. H., “Synthesis and Characterization of Nano-structured CaTiO3 Coating Via Sol-gel Dip-coating Route”, Journal of Advanced Materials in Engineering, Vol. 29, No. 2, pp. 13-22, 2010.
15. Letailleur, A. A., Ribot, F., Boissiere, C., Teisseire, J., Barthel, E., Desmazieres, B., Chemin, N., and Sanchez, C., “Sol Gel Derived Hybrid Thin Films: The Chemistry behind Processing”, Chemistry of Materials, Vol. 23, pp. 5082-5089, 2011.
16. Li, H., and Chen, Y., Preparation of Organic-inorganic Multifunctional Nanocomposite Coating via Sol-gel Routes”, Journal of Nanoparticle Research, Vol. 3, pp. 157-160, 2001.
17. Chou, T. P., and Cao, G., “Adhesion of Sol-gel Drived Organic-inorganic Hybrid Coatings on Polyester”, Journal of Sol-gel Science and Technology, Vol. 27, pp. 31-41, 2003.
18. Saldana, M., “Mechanical and thermal properties of SiO2-PMMA monoliths”, Journal of Non-crystalline Solids, Vol. 352, pp. 3561-3566, 2006.
19. Kim, S. W., “Characterization of UV Curable Hybrid Coating Materials Prepared by Sol-gel”, Korean Journal of Chemical Engineering, Vol. 28, pp. 298-303, 2011.
20. ASTM D3359-02, Standard Test Method For Measuring Adhesion by Tape Test, Annual book of ASTM Standard, Vol. 0601, 2006.
21. ASTM D3363-5, Standard Test Method For Film Hradness by Pencil test, Annual book of ASTM Standard, Vol. 0601, 2000.
22. Donley, M. S., “The Self-assembled Nanophase Particle°s Process: a Nanoscience Approach to Coating”, Progress in Organic Coatings, Vol. 47, pp. 401-415, 2003.
23. Daoud, W. A., Xin, J. H., and Tao, X., “Synthesis and Characterization of Hydrophobic Silica Nanocomposites”, Applied Surface Science, Vol. 252, pp. 5368-5371, 2006.
24. Zandi, R. Z., Verbeken, K., and Adriaens, A., “The Corrosion Resistance of 316L Stainless Steel Coated with a Silane Hybrid Nanocomposie Coating”, Progress in Organic Coating, Vol. 72, p. 709, 2011.
25. Foscant, R., Gysegem, A., Martinich, P. and Law, G., US Patent 4250074, 1981.
26. Eshaghi, A., Pakshir, M., and Mozaffarinia, R., “Preparation and Photo-induced Superhydrophilicity of Composite TiO2-SiO2-In2O3 Thin Film”, Applied Surface Science., Vol. 256, pp. 7062-7066, 2010.
27. Innocenzi, P., Kidchob, T., and Yoko, T., “Hybrid Organic-inorganic Sol-gel Materials Based on Epoxy-Amine Systems”, Journal of Sol-gel Science and Technology, Vol. 35, pp. 225-235, 2005.
28. Matavos-Aramyan, S., “Preparation of Titania/Silica Core-Shell Hybrid Nanocomposites for 2024 Al-Alloy Corrosion Protection and Investigation of their Mechanical and Thermal Stability”, Silicon, Vol. 10, pp. 1601-1612, 2018.
29. Pathak, S. S., Khanna, A. S., and Sinha, T. J. M., “Sol Gel Derived Organic-inorganic Hybrid Coating: a New Era in Corrrosion Protection of Materials”, Corrosion Reviews, Vol. 24, pp. 281-306, 2006.
30. Zand, R. Z., Langroudi, A. E., and Rahimi, A., “Corrosion Resistance Performance of Cerium Doped Silica Sol-gel Coatings on 304L Stainless Steel”, Iranian Polymer Journal, Vol. 14, pp. 371-377, 2005.
Journal of Advanced Materials in Engineering (Esteghlal)
Volume 37, Issue 4
March 2019
Pages 101-112

Files

Share

How to cite

Statistics

ارتقاء امنیت وب با وف ایرانی