Boriding of In-738 Superalloy via the Pack Cementation Method and the Study of the Kinetic of Boride Layer Formation

Authors

1 1. Department of Materials Engineering, Bu-Ali Sina University, Hamedan, Iran.

2 2. Non Metallic Materials Research Department, Niroo Research Institute (NRI), Tehran, Iran.

Abstract

In this study, mechanism and kinetic of formation of boride layer on In-738 superalloy were investigated via diffusion pack cementation method. Boriding was carried out at 900 °C for several short times (5, 15, 45 and 60 min). Phase study by means of X Ray defragtion (XRD) indicated that in addition to Ni3B, other phases such as Cr5B3, AlB2, and W2B were formed at the first period of process, and other compounds such as MoB2, VB, TiB, Ni6Si2B, and Mo2NiB2 were generated in the more prolonged time. SEM study also showed that not only the thickness of boride coating was increased, but also an interdiffusion zone (IDZ) was formed under the coating and it was grown by the upward diffusion of alloy elements. The kinetic study was good according to diffusion theory, confirming the two diffusion steps for IDZ. Thickness and hardness of the boride coating over 60 min process were 27.8 µm and 853 HV, respectively.

Keywords

References

1. Hu, X. B., Zhu, Y. L., and Ma, X. L., “Crystallographic Account of Nano-scaled Intergrowth of M2B-type Borides in Nickel-based Superalloys”, Acta Materialia, Vol. 68, pp. 70-81, 2014.
2. Sista, V., Kahvecioglu, O., Kartal, G., Zeng, Q. Z., Kim, J. H., Eryilmaz, O. L., and Erdemir, A., “Evaluation of Electrochemical Boriding of Inconel 600”, Surface and Coating Technology, Vol. 215, pp. 452-459, 2013.
3. Ueda, N., Mizukoshi, T., Demizu, K., Sone, T., Ikenaga, A., and Kawamoto, M., “Boriding of Nickel by the Powder-pack Method”, Surface and Coating Technology, Vol. 126, pp. 25-30, 2000.
4. Gunes, I., and Kayali, Y., “Investigation of Mechanical Properties of Borided Nickel 201 Alloy”, Materials Design, Vol. 53, pp. 577-580, 2014.
5. Wang, C., Guo, Y. An, Guo, J., and Zhou, L., “Microstructural Stability and Mechanical Properties of a Boron Modified Ni-Fe Based Superalloy for Steam Boiler Applications”, Materials Science and Engineering A, Vol. 639, pp. 380-388, 2015.
6. Gao, A., Hang, R., Bai, L., Tang, B., and Chu, P. K., “Electrochemical Surface Engineering of Titanium-based Alloys for Biomedical Application”, Electrochimica Acta, Vol. 271, pp. 699-718, 2018.
7. Ashrafizadeh, F.,. and Toroghinezhad, M. R., “Comparison of Carburizing and Boronizing Processes on Mechanical and Wear Properties of PM Parts”, Journal of Advanced Materials in Engineering (Esteghlal), Vol. 17, No. 1, pp. 177-186, 1998 (In Farsi).
8. Bose, S., Ford Robertson, S., and Bandyopadhyay, A., “Surface Modification of Biomaterials and Biomedical Devices using Additive Manufacturing”, Acta Biomaterialia, Vol. 66, pp. 6-22, 2018.
9. Esfahani, H., Dabir, F., Taheri, M., Sohrabi, N., and Toroghinejad, M. R., “Sol-gel Derived Hydroxyapatite Coating on TiB2/TiB/Ti Substrate”, Surface Engineering, Vol. 28, pp. 526-531, 2012.
10. Shahriari, F., Ashrafizadeh, F., and Saatchi, A., “Formation Mechanism of Titanium Diffusion Coating on Nickel-Based Superalloy B-1900”, Journal of Advanced Materials in Engineering (Esteghlal), Vol. 31, No. 2, pp. 13-22, 2012 (In Farsi).
11. Kulkan, M., Makuch, N., Dziarski, P., and Piasecki, A., “A Study of Nanoindentation for Mechanical Characterization of Chromium and Nickel Borides’ Mixtures Formed by Laser Boriding”, Ceramics International, Vol. 40, pp. 6083-6094, 2014.
12. Johnston, J. M, Matthew, J., and Shane A. C., “Plasma Boriding of a Cobalt-chromium Alloy as an Interlayer for Nanostructured Diamond Growth”, Applied Surface Science, Vol. 328, pp. 133-139, 2015.
13. Aytekin, H., and Akcin, Y., “Characterization of Borided Incoloy 825 Alloy”, Materials Design, Vol. 50, pp. 515-521, 2013.
14. Torun, O., and Celikyurek, I., “Boriding of Diffusion Bonded Joints of Pure Nickel to Commercially Pure Titanium”, Materials and Design, Vol. 30, pp. 1830-1834, 2009.
15. Sivakumar, B., Singh, R., and Pathak, L. C., “Corrosion Behavior of Titanium Boride Composite Coating Fabricated on Commercially Pure Titanium in Ringer's Solution for Bioimplant Applications”, Materials Science and Engineering C, Vol. 48, pp. 243-255, 2015.
16. Fan, Z., Miodownik, A. P., Chandrasekaran, L., and Ward-Close, M., “Young’s Moduli of In-situ Ti/TiB Composites Obtained by Rapid Solidification Processing”, Journal Materials Science, Vol. 29, No. 4, pp. 1127-1134, 1994.
17. Souri, M. H., Ashrafizadeh, F., and Salehi, M., “Boronizing of Fundamental Industrial Picas of Country”, Second National Surface Engineering Seminar , Tehran University, 1997 (In Farsi).
18. Tokunaga, T., Nishio, K., Ohtani, H., and Hasebe, M., “Phase Equilibria in the Ni-Si-B System” Materials Transaction, Vol. 44, No. 9, pp. 1651-1654, 2003.
19. Hamidi, S., Rahimipour, M. R., Eshraghi, M. J., Hadavi, S. M. M., and Esfahani, H., “Kinetics and Microstructural Investigation of High-temperature Oxidation of IN-738LC Super Alloy”, Journal of Materials Engineering and Performance, Vol. 26, pp. 563-570, 2017.
20. Zhang, B., Sheng, G., Jiao ,Y., Gao, Zh., Gong, X., Fan, H., and Zhong, J., “Precipitation and Evolution of Boride in Diffusion Affected Zone of TLP Joint of Mar-M247 Superalloy”, Journal of Alloys and Compounds, Vol. 695, pp. 3202-3210, 2017.
21. Liu, Y., Wang, J., Mao, M. K. F., Li, J., Wang, G., He, Sh., Gao, H., and Sun, B., “Microstructure Evolution and Mechanical Performance of Nickel Based Superalloy C1023 at Elevated Temperatures”, Materials Characterization, Vol. 138, pp. 174-185, 2018.
22. Gunes, I., Keddam, M., Chegroune, R., and Ozcatal, M., “Growth Kinetics of Boride Layers Formed on 99.0% Purity Nickel”, Bulletin Materials Science, Vol. 38, p. 1113, 2015.
23. Sarman, B., Tikekar, N., Chandran, M., and Ravi, K. S., “Kinetics of Growth of Superhard Boride Layers During Solid State Diffusion of Boron Into Titanium”, Ceramics International, Vol. 38, pp. 6795-6805, 2012.
24. Ebrahimi, A., Esfahani, H., Fattah-alhosseini and A., Imantalab, O., “In-vitro Electrochemical Study of TiB/TiB2 Composite Coating on Titanium in Ringer's Solution”, Journal of Alloys and Compounds, Vol. 765, pp. 826-834, 2018.
25. Xie, F., and Sun, L., “A Novel Approach to Achieve Thick Single Phase Fe2B Coating by Alternating Current Field Enhanced Pack Boriding”, Physics Procedia, Vol. 50, pp. 88-93, 2013.
26. Cheng, J., Yi, S., and Park, J. S., “Simultaneous Coating of Si and B on Nb-Si-B Alloys by a Halide Activated Pack Cementation Method and Oxidation Behaviors of the Alloys with Coatings at 1100 °C”, Journal of Alloys and Compounds, Vol. 644, pp. 975-981, 2015.
27. Hattori, M., Goto, N., Murata, Y., Koyama, T., and Morinaga, M., “Diffusion of Refractory Elements in Ni-Al-X (X:Re,W) Ternary Alloys”, Materials Transactions, Vol. 46, No. 2, pp. 163-166, 2005.
Journal of Advanced Materials in Engineering (Esteghlal)
Volume 38, Issue 1
June 2019
Pages 76-86

Files

Share

How to cite

Statistics

ارتقاء امنیت وب با وف ایرانی