Investigation of the Effect of Homogenization Treatment on Distribution of Alloying Elements, Microstructure and Hardness of Co-Al-W-Ti-Ta-Base Superalloy

1. Gu, Y., Harada, H., Cui, C., Ping, D., Sato, A., and Fujioka, J., “New Ni-Co-Base Disk Superalloys with Higher Strength and Creep resistance”, Scripta Materialia, Vol. 9, pp. 815-818, 2006.
2. Bocchini, P. J., “Microstructure and Mechanical Properties in Gamma (Face-Centered Cubic) + Gamma Prime (L12) Precipitation-Strengthened Cobalt-based Superalloys”, Ph.D. Thesis, Northwestern University, 2015.
3. Yan, H -Y., Vorontsov, V. A., and Dye, D., “Alloying Effects in Polycrystalline γ′ Strengthened Co-Al-W Base Alloys”, Intermetallics, Vol. 48, pp. 44-53, 2014.
4. Bauer, A., Neumeier, S., Pyczak, F., and Göken, M., “Microstructure and Creep Strength of different γ/γ′-Strengthened Co-Base Superalloy variants”, Scripta Materialia, Vol. 12, pp. 1197-1200, 2010.
5. Bauer, A., Neumeier, S., Pyczak, F., Singer R. F., and Göken, M., “Creep Properties of Different γ′-Strengthened Co-Base Superalloys”, Materials Science and Engineering, Vol. 550, pp. 333-341, 2012.
6. Zhu, L., Wei, C., Qi, H., Jiang, L., Jin, Z., and Zhao, J. -C., “Experimental Investigation of Phase Equilibria in the Co-Rich Part of the Co-Al-X (X= W, Mo, Nb, Ni, Ta) Ternary Systems using Diffusion Multiples”, Journal of Alloys and Compounds, Vol. 691, pp. 110-118, 2017.
7. Ding, X. F., Mi, T., Xue, F., Zhou, H. J., and Wang, M. L., “Microstructure Formation in γ–γ′ Co-Al-W-Ti Alloys During Directional Solidification”, Journal of Alloys and Compounds, Vol. 599, pp. 159-163, 2014.
8. McDevitt, E. T., “Feasibility of Cast and Wrought Co-Al-WX Gamma-prime Superalloys”, Materials Science Forum, Trans Tech Publications, Vol. 783, Pp. 1159-1164, 2014.
9. Mughrabi, H., “The Importance of Sign and Magnitude of γ/γ′ Lattice Misfit in Superalloys-with Special Reference to the New γ′-Hardened Cobalt-Base Superalloys”, Acta Materialia, Vol. 81, pp. 21-29, 2014.
10. Xue, F., Zhou, H., Chen, X., Shi, Q., Chang, H., Wang, M., Ding, X. and Feng, Q., “Creep Behavior of a Novel Co-Al-W-Base Single Crystal Alloy Containing Ta and Ti at 982 ∘C”, MATEC Web of Conferences, EDP Sciences, Vol. 14, p. 15002, 2014.
11. Zhuang, X., Song L., Longfei, L., and Qiang, F., “Microstructures and Properties of a Novel
γ′-Strengthened Multi-Component CoNi-Based Wrought Superalloy Designed by CALPHAD Method”, Materials Science and Engineering, pp. 139-219, 2020.
12. Hausmann, D., Solís, C., Freund, L. P., Volz, N., Heinemann, A., Göken, M., Gilles, R., and Neumeier, S., “Enhancing the High-Temperature Strength of a Co-Base Superalloy by Optimizing the g/g¢ Microstructure”, Metals, Vol. 3, pp. 321, 2020.
13. Sohrabi, M. J., and Mirzadeh, H. “Estimation of Homogenisation Time for Superalloys Based on a New Diffusional Model”, Materials Science and Technology 36, Vol. 3, pp. 380-384, 2020.
14. Povstugar, I., Choi, P -Pa., Neumeier, S., Bauer, A., Zenk, C. H., Göken, M., and Raabe, D., “Elemental Partitioning and Mechanical Properties of Ti- and Ta-Containing Co-Al-W-Base Superalloys Studied by Atom Probe Tomography and Nanoindentation”, Acta Materialia, Vol. 78, pp. 78-85, 2014.
15. Casas, R., Gálvez, F., and Campos, M., “Microstructural Development of Powder Metallurgy Cobalt-Based Superalloys Processed by Field Assisted Sintering Techniques (FAST)”, Materials Science and Engineering, Vol. 724, pp. 461-468, 2018.
16. Zhou, X., Fu, H., Zhang, Y., Xu, H., and Xie, J., “Effect of Ta and Ti on the Solidification Characteristics of Novel γ′-Strengthened Co-base Superalloys”, Journal of Alloys and Compounds, Vol. 768, pp. 464-475, 2018.