EFFECT OF MISH METAL TYPE ON THE MICROSTRUCTURE AND ABSORPTION/DESORPTION CHARACTERISTICS OF MMNI5 HYDROGEN STORAGE ALLOY

Authors

Faculty of Material & Manufacturing Technologies, Malek Ashar University of Technology

Abstract

In this article, the effects of Pr and Nd were investigated on the microstructure and absorption/desorption characteristics of MmNi5 hydrogen storage alloy. The alloys were prepared in Vacuum induction furnace and the microstructures and phases were analyzed using scanning electron microscopy (SEM) equipped with energy dispersive X-ray analysis (EDS) and X-ray diffraction (XRD). Hydrogen absorption/desorption characteristics was performed on Sievert apparatus. The results showed that the microstructure of the alloys consist of matrix, second phase as a result of Al segregation, porosities and cracks. The amount of second phases and Al in this phase in Mm(Pr,Nd)Ni4.7Al0.3  is less than MmNi4.7Al0.3. Al in Mm(Pr,Nd)Ni4.7Al0.3 were more homogenized. Pressure-Composition Isotherms of hydrogen absorption/desorption at 25˚C showed that for MmNi4.7Al0.3 and  Mm(Nd,Pr)Ni4.7Al0.3, absorption pressures were 14.52 and 9.90 bar,  desorption pressures were 5.53 and 5.49 bar, hydrogen storage capacities were 1.37 and 1.33 wt. % and hysteresis were 0.73 and 0.58, respectively. These results are useful in industrial applications, because of inconsiderable decrease in hydrogen storage capacity and the other positive variation in absorption/desorption characteristics, especially the hysteresis and absorption pressure.

Keywords

References

1. Balasubramaniam, R., Mungole, M. N., and Rai, K. N., “Hydriding Properties of Mmni5 System with Aluminium, Manganese and Tin Substitutions”, Journal of Alloys and Compounds, Vol 196, pp. 63-70, 1993.
2. Schlapbach, L., and Zuttel, A., “Hydrogen-Storage Materials for Mobile Applications”, Nature, Vol. 414, pp. 353-358, 2001.
3. Millet, P., Advances in Hydrogen Production, Storage and Distribution,1st ed., Elsevier, U.S., 2014.
4. Zuttel, A., “Materials for Hydrogen Storage”, Materials Today, Vol. 6, pp. 24-33, 2003.
5. Sandrock, G., Hydrogen Energy System: Production and Utilization of Hydrogen and Future Aspects, 1st ed., Springer, Netherlands: Dordrecht, 1995.
6. Zhou, L., “Progress and Problems in Hydrogen Storage Methods”, Renewable and Sustainable Energy Reviews, Vol. 94, pp. 395-408, 2005.
7. Herrero, J. P., “Modelling and Analysis of a Metal Hydride Cooling System”, Ph.D. Thesis, Polytechnic University of Valencia and Head of the Institute for Energy Engineering, 2010.
8. David, W. I. F., “Effective Hydrogen Storage: a Strategic Chemistry Challenge”, Faraday Discussions, Vol. 151, pp. 399-414, 2011.
9. Yang, F. S., Chen, X. Y., Wu, Z., Wang, S. M., Wang, G. X., Zhang, Z. X. and Wang, Y. Q., “Experimental Studies on The Poisoning Properties of a Low-Plateau Hydrogen Storage Alloy LaNi4.3Al0.7 Against CO impurities”, International Journal of Hydrogen Energy, Vol. 42, pp. 16225-16234, 2017.
10. Uchida, H., Tada, M., and Huang, Y. C., “The Influence of Cerium, Praseodymium, Neodymium and Samarium on Hydrogen Absorption in LaNi5 Alloys”, Journal of the Less Common Metals, Vol. 88, pp. 81-87, 1982.
11. Lin, H. C., Lin, K. M., Sung, C. W., and Wu, K. C., “Characteristics of Activation and Anti-Poisoning in an LmNi4.8Al0.2 Hydrogen Storage Alloy," International Journal of Hydrogen Energy, Vol. 32, pp. 2494-2500, 2007.
12. Mungole, M. N., and Balasubramaniam, R., “Hydrogen Desorption Kinetics in MmNi4.2Al0.8-H System”, International Journal of Hydrogen Energy, Vol. 23, pp. 349-353, 1998.
13. Clay, K. R., Goudy, A. J., Schweibenz, R. G., and Zarynow, A., “The Effect of the Partial Replacement of Lanthanum in LaNi5H with Cerium, Praseodymium, and Neodymium on Absorption and Desorption Kinetics”, Journal of the Less Common Metals, Vol. 166, pp. 153-162, 1990.
14. Earnshaw, N. N. G. A., Chemistry of the Elements, 2st ed., Butterworth-Heinemann: Oxford, London, 1997.
15. Sharma, V. K., and Anil Kumar, E., “Metal Hydrides for Energy Applications- Classification, PCI Characterisation and Simulation”, International Journal of Energy Research, Vol. 41, pp. 901-923, 2017.
16. Kumar, E. A., Maiya, M. P., Murthy, S. S., and Viswanathan, B., “Structural, Hydrogen Storage and Thermodynamic Properties of some Mischmetal-Nickel Alloys with Partial Substitutions for Nickel”, Journal of Alloys and Compounds, Vol. 476, pp. 92-97, 2009.
Journal of Advanced Materials in Engineering (Esteghlal)
Volume 40, Issue 1
May 2021
Pages 99-112

Files

Share

How to cite

Statistics

ارتقاء امنیت وب با وف ایرانی