EVALUATING HOT DEFORMATION BEHAVIOR OF W360 TOOL STEEL BY HOT COMPRESSION TEST

1. http://www.bohler-edelstahl.com/en/W360ISOBLOC, 2021.
2. Schweiger, K. H., Asenberger, J. H., and Dremel, H., ‘‘New Tool Steel for Warm and Hot Forging’’, Proceedings of the 6th International Tooling Conference, Karlstad University, Sweden, pp. 129-139, 2002.
3. Dao-chun, H., Wang, L., and Hai-bo, L., “Research on High Temperature Deformation Behavior of Low Carbon Steel Based on Processing Map”, Advances in Mechanical Engineering, Vol. 11, No. 4, pp. 1-12, 2019.
4. Łukaszek-Sołek, A., Krawczyk, J., Sleboda, T., and Grelowski, J., “Optimization of the Hot Forging Parameters for 4340 Steel by Processing Maps”, Jornal of Materials Research and Technology, Vol. 8, No. 3, pp. 3281-3290, 2019.
5. Ezatpour, H. R., Sajjadi, S. A., and Haddad-Sabzevar M., “Influence of Hot Deformation Strain Rate on the Mechanical Properties and Microstructure of K310 Cold Work Tool Steel”, Materials Science and Engineering: A, Vol. 527, No. 6, pp. 1299-1305, 2010.
6. Humphreys, F. J., and Hatherly, M., Recrystallization and Related Annealing Phenomena , 2nd Ed., p. 417, Elsevier Science, 2004.
7. Chamanfar, A., Jahazi, M., Gholipour, J., Wanjara, P., and Yue, S., “Evolution of Flow Stress and Microstructure During Isothermal Compression of Waspaloy”, Materials Science and Engineering: A, Vol. 615, pp. 497-510, 2014.
8. Vecko Pirtovsek, P., Kugler, G., Godec, M., Turk, R., and Tercelj, M., “Experimental Study of Hot Deformation of 1.2690 Tool Steel-Preliminary Results”, Materials and Geoenvironment, Vol. 53, No. 1, pp. 93-101, 2006.
9. Kriaj, A., Matev Fazarinc, M. J., and Fajfar, P., “Hot Workability of 95mnwcr5 Tool Steel”, Materiali in Tehnologije, Vol. 45, No. 4, pp. 351-355, 2011.
10. Ha, T. K, Jeong, H. T., and Jung, J. Y., ‘‘High Temperature Deformation Behavior of M2 High-Speed Tool Steel”, Transactions Technology Publication, Vol. 124, pp. 1365-1368, 2007.
11. Bokota, A., Kulawik, A., Szymczyk, R., and Wróbel, J., “The Numerical Analysis of the Phenomena of Superficial Hardening of the Hot-Work Tool Steel Elements”, Archives of Metallurgy and Materials, Vol. 60, No. 4, pp. 2763-2772, 2015.
12. Leitner, T., Werkovits, A., Kleber, S., and Pottlacher, G., “Surface Tension and Density of Liquid Hot Work Tool Steel W360 by Voestalpine BÖHLER Edelstahl Gmbh & Co KG Measured With an Electromagnetic Levitation Apparatus”, International Journal of Thermophysics, Vol. 42, No. 2, pp. 1-14, 2021.
13. Lee, F. T., “An Assessment of Material Properties on Bohler W360 Isobloc for Hot Work Tool Steel”, Materials Science and Technology-Association for Iron and Steel Technology, Vol. 6, pp. 935-943, 2007.
14. Amirarsalani, R., Morakabati, M., and Mahdavi, R., “Hot Workability Behavior of W360 Hot Work Tool Steel in the Cast and Wrought Conditions”, Modares Mechanical Engineering, Vol. 6, No. 7, pp. 1923-1932, 2020.
15. Standard ASTM E209, “Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates”, ASTM International, 2010.
16. Chavilian, H., Farmanesh, K., Soltanipour, A., and Maghsoudi, E., “Investigation of Hot Deformation Behavior of 321 Stainless Steel Using Hot Compression Test and Modeling with Constitutive Equations”, Journal of Advanced Materials in Engineering, Vol. 36, No. 3, pp. 63-72, 2017.
17. Imbert, C., and McQueen, H., ‘‘Peak Strength, Strain Hardening and Dynamic Restoration of A2 and M2 Tool Steels in Hot Deformation’’, Materials Science and Engineering: A, Vol. 313, No. 1-2, pp. 88-103, 2001.
18. Dehghan-Manshadi, A., Barnett, M. R., and Hodgson, P., “Recrystallization in AISI 304 Austenitic Stainless Steel During and After Hot Deformation”, Materials Science and Engineering: A, Vol. 485, No. 1-2, pp. 664-672, 2008.
19. Mintz, B., Shaker, M., and Crowther, D., “Hot Ductility of an Austenitic and a Ferritic Stainless Steel”, Materials Science and Technology, Vol. 13, No. 3, pp. 243-250, 1997.
20. Quan, G. Z., Li, G. S., Chen, T., Wang, Y. X., Zhang, Y. W., and Zhou, J., ‘‘Dynamic Recrystallization Kinetics of 42crmo Steel During Compression at Different Temperatures and Strain Rates”, Materials Science and Engineering: A, Vol. 528, No. 13-14, pp. 4643-4651, 2011.
21. Lin, Y., Chen, M. S., and Zhong, J., “Microstructural Evolution in 42crmo Steel During Compression at Elevated Temperatures”, Materials Letters, Vol. 62, No. 14, pp. 2132-2135, 2008.
22. Quan, G. Z., Wang, Y., Liu, Y. Y., and Zhou, J.,‘‘Effect of Temperatures and Strain Rates on the Average Size of Grains Refined by Dynamic Recrystallization for As-Extruded 42crmo Steel’’, Materials Research, Vol. 16, No. 5, pp. 1092-1105, 2013.
23. Ezatpour, H. R., Sajjadi, S. A., Haddad-Sabzevar M., and Ebrahimi, G. R., “Hot Deformation and Processing Maps of K310 Cold Work Tool Steel”, Materials Science and Engineering: A, Vol. 550, pp. 152-159, 2012.
24. Prasad, Y. V. R. K., ‘‘Processing Maps: A Status Report’’, Journal of Materials Engineering and Performance, Vol. 12, No. 6, pp. 638-645, 2003.
25. Dieter, G. E., Kuhn, H. A., and Semiatin, S. L., Handbook of Workability and Process Design, ASM International, 2013.
26. Prasad, Y., Rao, K., and Sasidhar, S., Hot Working Guide: A Compendium of Processing Maps, 2nd Ed., pp. 5-310, ASM international, 2015.
27. Lin, Y., and Liu, G., “Effects of Strain on the Workability of A High Strength Low Alloy Steel in Hot Compression”, Materials Science and Engineering: A, Vol. 523, No. 1-2, pp. 139-144, 2009.
28. Roberts, G. A., Kennedy, R., and Krauss, G., Tool Steels , 5th Ed., p. 220, ASM International, 1998.
29. Kazemi Kooroshfar, M., Zarei Hanzki, A., Shah Hoseini, M., Araei, A., and Dehghan Manshadi, A., “The Effect of Hot Work Parameters on Hot Ductility of X210Cr12 Steel”, Steel Symposium 81, Isfahan, pp. 291-300, 2003.