A
-
Abbasi, S. M.
The Effect of Mg on Microstructure and High Temperature Mechanical Properties of Hasteloy X Superalloy [Volume 37, Issue 2, 2018, Pages 29-37]
-
Adeli, M.
Investigating the Effect of Ethanol and Ascorbic Acid on Titanium Dioxide Extraction from Ilmenite by Oxalic Acid [Volume 37, Issue 1, 2018, Pages 11-25]
-
Aghaei, A.
Fabrication and Characterization of an Optical Nano-hybrid Sol-gel Derived Thin Film on the PMMA Substrate [Volume 37, Issue 4, 2019, Pages 101-112]
-
Akbari, B.
Structural and Mechanical Evaluation of Polycaprolactone Scaffold with the Gradient Porous Microstructure for Bone Tissue Engineering [Volume 37, Issue 3, 2018, Pages 75-86]
-
Akbari, Gh.
Evaluation of the Microstructure of Ni-Nb-Si Alloy During Mechanical Alloying [Volume 37, Issue 1, 2018, Pages 1-9]
-
Akbari Taemeh, M.
Structural and Mechanical Evaluation of Polycaprolactone Scaffold with the Gradient Porous Microstructure for Bone Tissue Engineering [Volume 37, Issue 3, 2018, Pages 75-86]
-
Akbarzadeh, M.
An Investigation Into the Properties of MoS2-Cr Coatings Produced by DC Magnetron Sputtering [Volume 37, Issue 4, 2019, Pages 25-41]
-
Alizadeh, M.
The Effect of Al2O3 Particles Concentration on the Properties of Ni-Mo-Al2O3 Composite Coatings Fabricated by Electrodeposition [Volume 37, Issue 2, 2018, Pages 49-58]
-
Allahkaram, S. R.
A Comparative Investigation into Corrosion and Wear Properties of Zn-Ni and Zn-Ni/PTFE Coatings [Volume 37, Issue 3, 2018, Pages 49-62]
-
Amiri, P.
First Principeles Initio Study of the Electronic and Optical Properties of Bulk TiC and Its Narrow Nanowires by Density Functional Theory [Volume 37, Issue 1, 2018, Pages 83-96]
-
Amoohadi, M.
An Investigation of the Magnetic Properties of Iron-based Soft Magnetic Composites Coated by Sodium Silicate Insulator [Volume 37, Issue 1, 2018, Pages 97-104]
-
Arjmand, S.
The Formation of Al3Ti Intermetallic compound at the junction interface of Titanium-Aluminum diffusional Coupling by Means of Diffusional Annealing Process [Volume 37, Issue 1, 2018, Pages 37-44]
-
Ashrafizadeh, F.
Investigation of Adhesion and the Load Bearing of CrN-CrAlN Nanostructured Coating by Physical Vapor Deposition [Volume 37, Issue 2, 2018, Pages 81-93]
-
Askari, M.
The Effect of Temperature on the Magnetic Properties of Hard Magnet Nd2Fe14B Produced by Hot Press Method [Volume 37, Issue 2, 2018, Pages 13-27]
B
-
Baradaran, A.
Investigation of the Optical Properties of GeO2-PbO-CaO-SrO Glass System in the Presence of Different Amounts of CaO and SrO [Volume 37, Issue 3, 2018, Pages 107-119]
-
Barounian, M. H.
The Effect of Indomethacin on the Calcium Phosphate/polymer Light-Cured Nanobiocomposites âBehavior [Volume 37, Issue 1, 2018, Pages 45-54]
-
Bozorgmehr, M.
The Effect of Temperature on the Magnetic Properties of Hard Magnet Nd2Fe14B Produced by Hot Press Method [Volume 37, Issue 2, 2018, Pages 13-27]
C
-
Cheshmpish, A.
The Effect of Al2O3 Particles Concentration on the Properties of Ni-Mo-Al2O3 Composite Coatings Fabricated by Electrodeposition [Volume 37, Issue 2, 2018, Pages 49-58]
D
-
Daneshvar e Asl, S.
Two-Phase Rutile/Anatase TiO2 Nanoleafed Nanorod Arrays for Photoelectrochemical Applications [Volume 37, Issue 2, 2018, Pages 69-79]
-
Darvishi, S.
Preparation and Characterization of PDMS-SiO2-CuO Nanocomposite Coating on Stainless Steel and Its Super-hydrophobicity Property [Volume 37, Issue 3, 2018, Pages 1-12]
-
Dini, Gh.
The Effect of pH and Duration of Hydrothermal Process on the Synthesis of Manganese Ferrite Nanoparticles [Volume 37, Issue 1, 2018, Pages 105-111]
E
-
Ebrahimian-Hosseinabadi, M.
Modeling and Mechanical Analysis of Biphasic Calcium Phosphate/Silk Composite Bone Plate for Fractured Tibia Healing [Volume 37, Issue 2, 2018, Pages 59-67]
-
Ebrahimi far, H.
Investigation of Isothermal and Cyclic Oxidation Behavior of Codeposited 430 Ferritic Stainless Steel with Aluminum and Titanium [Volume 37, Issue 3, 2018, Pages 13-23]
-
Emadi, R.
Fabrication and Evaluation of the Mechanical and Bioactivity Properties of a Nano Structure-hardystonite Scaffold by the Space Holder Method [Volume 37, Issue 1, 2018, Pages 55-67]
-
Emami, N.
Modification of Superhydrophilic, Anti-bacterial Polyurethane Polymer with TiO2 Nanoparticles for Medical Devices [Volume 37, Issue 4, 2019, Pages 73-89]
-
Emamy, M.
Grain Growth Kinetics of Magnesium Alloys Containing Aluminum and Rare-Earth Element Gadolinium [Volume 37, Issue 4, 2019, Pages 1-11]
-
Enayati, M. H.
Evaluation of the Microstructure of Ni-Nb-Si Alloy During Mechanical Alloying [Volume 37, Issue 1, 2018, Pages 1-9]
-
Erfan Niya, H.
A study on the Adsorption of Graphene/Graphene Oxideâreinforced Polymer âNanocomposites using Reactive Molecular Dynamics [Volume 37, Issue 3, 2018, Pages 25-47]
-
Eshaghi, A.
Fabrication and Characterization of an Optical Nano-hybrid Sol-gel Derived Thin Film on the PMMA Substrate [Volume 37, Issue 4, 2019, Pages 101-112]
F
-
Falsafein, M.
Investigation of Adhesion and the Load Bearing of CrN-CrAlN Nanostructured Coating by Physical Vapor Deposition [Volume 37, Issue 2, 2018, Pages 81-93]
-
Faraji, S.
The Effect of pH and Duration of Hydrothermal Process on the Synthesis of Manganese Ferrite Nanoparticles [Volume 37, Issue 1, 2018, Pages 105-111]
-
Firoozi, S.
The Effect of Tartrate Ion on the Separation Behavior of Zinc and Cadmium in the Sulfate Solution [Volume 37, Issue 3, 2018, Pages 63-73]
G
-
Ghadiri, S.
Synthesis and Characterization of Nanoporous Calcium Magnesium Silicate and Assessment of the Calcination Temperature Effect on Its Drug Delivery Behavior [Volume 37, Issue 1, 2018, Pages 69-82]
-
Ghanbari, M.
The Effect of Boron and Zirconium on the Microstructure and Mechanical Properties of Cast Fe3Al-Based Alloys [Volume 37, Issue 4, 2019, Pages 43-57]
-
Gharaati, A. R.
An Investigation of the Magnetic Properties of Iron-based Soft Magnetic Composites Coated by Sodium Silicate Insulator [Volume 37, Issue 1, 2018, Pages 97-104]
-
Ghasemi, A.
The Effect of Temperature on the Magnetic Properties of Hard Magnet Nd2Fe14B Produced by Hot Press Method [Volume 37, Issue 2, 2018, Pages 13-27]
-
Ghorbanzadeh, M.
Optimization of the Selective Dissolution of Li from the Spent Li-ion Batteries using Oxalic Acid by a Response Surface Methodology [Volume 37, Issue 3, 2018, Pages 87-105]
-
Golestanifard, F.
The Effect of Rheological Parameters on the Behavior of Silicon Nitride-Starch Slurry Used in Gelcasting Porous Silicon Nitride [Volume 37, Issue 4, 2019, Pages 13-23]
H
-
Habibi, A.
Deposition of Diamond-like Carbon and Carbyne Thin Film by Cathodic Plasma Electrolysis Process [Volume 37, Issue 2, 2018, Pages 39-48]
-
Habibi, Negar
The Effect of Catalyst and Water Content of the Hydrolysis Step on the Physical Properties of Silica Aerogel Dried at the Ambient Pressure [Volume 37, Issue 1, 2018, Pages 27-35]
-
Haghshenas Fatmesari, D.
The Effect of Tartrate Ion on the Separation Behavior of Zinc and Cadmium in the Sulfate Solution [Volume 37, Issue 3, 2018, Pages 63-73]
-
Haghshenas Gorgani, M.
The Effect of Rheological Parameters on the Behavior of Silicon Nitride-Starch Slurry Used in Gelcasting Porous Silicon Nitride [Volume 37, Issue 4, 2019, Pages 13-23]
-
Hajfarajzadeh, M.
Fabrication and Characterization of an Optical Nano-hybrid Sol-gel Derived Thin Film on the PMMA Substrate [Volume 37, Issue 4, 2019, Pages 101-112]
-
Hassanzadeh-Tabrizi, A.
Synthesis and Characterization of Nanoporous Calcium Magnesium Silicate and Assessment of the Calcination Temperature Effect on Its Drug Delivery Behavior [Volume 37, Issue 1, 2018, Pages 69-82]
-
Hesaraki, S.
The Effect of Indomethacin on the Calcium Phosphate/polymer Light-Cured Nanobiocomposites âBehavior [Volume 37, Issue 1, 2018, Pages 45-54]
-
Hosseinzadeh, M.
The Effect of Temperature on the Magnetic Properties of Hard Magnet Nd2Fe14B Produced by Hot Press Method [Volume 37, Issue 2, 2018, Pages 13-27]
J
-
Jarrahi, Z.
The Effect of Boron Addition on the Microstructure, Hardness and Characteristic Temperatures of Cu-12Al-4Ni Memory Alloy Prepared by Mechanical Alloying, Pressing and Rolling [Volume 37, Issue 4, 2019, Pages 59-72]
K
-
Karimi, Mahin
The Effect of Catalyst and Water Content of the Hydrolysis Step on the Physical Properties of Silica Aerogel Dried at the Ambient Pressure [Volume 37, Issue 1, 2018, Pages 27-35]
-
Karimzadeh, F.
Synthesis of Three-dimensional Graphene and Optimization of Its Morphology [Volume 37, Issue 2, 2018, Pages 1-12]
-
Kazemzadeh, A.
The Effect of Indomethacin on the Calcium Phosphate/polymer Light-Cured Nanobiocomposites âBehavior [Volume 37, Issue 1, 2018, Pages 45-54]
-
Kharaziha, M.
Synthesis of Three-dimensional Graphene and Optimization of Its Morphology [Volume 37, Issue 2, 2018, Pages 1-12]
-
Kharaziha, M.
Preparation and Characterization of PDMS-SiO2-CuO Nanocomposite Coating on Stainless Steel and Its Super-hydrophobicity Property [Volume 37, Issue 3, 2018, Pages 1-12]
-
Kharaziha, M.
Preparation and Characterization of PDMS-SiO2-CuO Nanocomposite Coating on Stainless Steel and Its Super-hydrophobicity Property [Volume 37, Issue 3, 2018, Pages 1-12]
-
Khosroshahi, Z.
Synthesis of Three-dimensional Graphene and Optimization of Its Morphology [Volume 37, Issue 2, 2018, Pages 1-12]
L
-
Lashani Zand, M.
Determination of the Modified Hall-Petch Equation Constants and the Relationship Between the Microstructure and Mechanical Properties of AS7U3G Alloy [Volume 37, Issue 4, 2019, Pages 91-100]
M
-
Mahboubi, F.
Deposition of Diamond-like Carbon and Carbyne Thin Film by Cathodic Plasma Electrolysis Process [Volume 37, Issue 2, 2018, Pages 39-48]
-
Mahdavi, S.
A Comparative Investigation into Corrosion and Wear Properties of Zn-Ni and Zn-Ni/PTFE Coatings [Volume 37, Issue 3, 2018, Pages 49-62]
-
Mahmoudi Saleh Abad, M.
Investigation of Isothermal and Cyclic Oxidation Behavior of Codeposited 430 Ferritic Stainless Steel with Aluminum and Titanium [Volume 37, Issue 3, 2018, Pages 13-23]
-
Maleki, A.
Determination of the Modified Hall-Petch Equation Constants and the Relationship Between the Microstructure and Mechanical Properties of AS7U3G Alloy [Volume 37, Issue 4, 2019, Pages 91-100]
-
Minouei, H.
Evaluation of the Microstructure of Ni-Nb-Si Alloy During Mechanical Alloying [Volume 37, Issue 1, 2018, Pages 1-9]
-
Mirdamadi, Sh.
Optimization of the Selective Dissolution of Li from the Spent Li-ion Batteries using Oxalic Acid by a Response Surface Methodology [Volume 37, Issue 3, 2018, Pages 87-105]
-
Mirkazemi, M.
The Effect of Rheological Parameters on the Behavior of Silicon Nitride-Starch Slurry Used in Gelcasting Porous Silicon Nitride [Volume 37, Issue 4, 2019, Pages 13-23]
-
Mirzaaei ghasabe, H.
Optimization of the Selective Dissolution of Li from the Spent Li-ion Batteries using Oxalic Acid by a Response Surface Methodology [Volume 37, Issue 3, 2018, Pages 87-105]
-
Mirzadeh, H.
Grain Growth Kinetics of Magnesium Alloys Containing Aluminum and Rare-Earth Element Gadolinium [Volume 37, Issue 4, 2019, Pages 1-11]
-
Mohammadpour, V.
Investigating the Effect of Ethanol and Ascorbic Acid on Titanium Dioxide Extraction from Ilmenite by Oxalic Acid [Volume 37, Issue 1, 2018, Pages 11-25]
-
Moradpour, E.
An Investigation Into the Properties of MoS2-Cr Coatings Produced by DC Magnetron Sputtering [Volume 37, Issue 4, 2019, Pages 25-41]
-
Mousavi Khoie, S.M.
Deposition of Diamond-like Carbon and Carbyne Thin Film by Cathodic Plasma Electrolysis Process [Volume 37, Issue 2, 2018, Pages 39-48]
-
Mozaffari, M.
An Investigation of the Magnetic Properties of Iron-based Soft Magnetic Composites Coated by Sodium Silicate Insulator [Volume 37, Issue 1, 2018, Pages 97-104]
N
-
Nadimi, H.
The Effect of Tartrate Ion on the Separation Behavior of Zinc and Cadmium in the Sulfate Solution [Volume 37, Issue 3, 2018, Pages 63-73]
-
Nemati, Sh.
Preparation and Characterization of PDMS-SiO2-CuO Nanocomposite Coating on Stainless Steel and Its Super-hydrophobicity Property [Volume 37, Issue 3, 2018, Pages 1-12]
-
Niroumand, B.
Determination of the Modified Hall-Petch Equation Constants and the Relationship Between the Microstructure and Mechanical Properties of AS7U3G Alloy [Volume 37, Issue 4, 2019, Pages 91-100]
-
Niroumand, B.
Determination of the Modified Hall-Petch Equation Constants and the Relationship Between the Microstructure and Mechanical Properties of AS7U3G Alloy [Volume 37, Issue 4, 2019, Pages 91-100]
-
Noorisafa, F.
Modification of Superhydrophilic, Anti-bacterial Polyurethane Polymer with TiO2 Nanoparticles for Medical Devices [Volume 37, Issue 4, 2019, Pages 73-89]
-
Nourmohammadi, J.
Structural and Mechanical Evaluation of Polycaprolactone Scaffold with the Gradient Porous Microstructure for Bone Tissue Engineering [Volume 37, Issue 3, 2018, Pages 75-86]
P
-
Panahi Moghadam, A.
The Effect of Mg on Microstructure and High Temperature Mechanical Properties of Hasteloy X Superalloy [Volume 37, Issue 2, 2018, Pages 29-37]
-
Pishevarz, G.
A study on the Adsorption of Graphene/Graphene Oxideâreinforced Polymer âNanocomposites using Reactive Molecular Dynamics [Volume 37, Issue 3, 2018, Pages 25-47]
-
Pourabdoli, M.
The Effect of Boron Addition on the Microstructure, Hardness and Characteristic Temperatures of Cu-12Al-4Ni Memory Alloy Prepared by Mechanical Alloying, Pressing and Rolling [Volume 37, Issue 4, 2019, Pages 59-72]
-
Pourbahari, B.
Grain Growth Kinetics of Magnesium Alloys Containing Aluminum and Rare-Earth Element Gadolinium [Volume 37, Issue 4, 2019, Pages 1-11]
R
-
Rajabi, M.
The Effect of Boron and Zirconium on the Microstructure and Mechanical Properties of Cast Fe3Al-Based Alloys [Volume 37, Issue 4, 2019, Pages 43-57]
-
Raygan, Sh.
The Effect of Boron Addition on the Microstructure, Hardness and Characteristic Temperatures of Cu-12Al-4Ni Memory Alloy Prepared by Mechanical Alloying, Pressing and Rolling [Volume 37, Issue 4, 2019, Pages 59-72]
-
Razmjou, A.
Modification of Superhydrophilic, Anti-bacterial Polyurethane Polymer with TiO2 Nanoparticles for Medical Devices [Volume 37, Issue 4, 2019, Pages 73-89]
-
Rezazadeh, M.
An Investigation of the Magnetic Properties of Iron-based Soft Magnetic Composites Coated by Sodium Silicate Insulator [Volume 37, Issue 1, 2018, Pages 97-104]
S
-
Sadeghzade, S.
Fabrication and Evaluation of the Mechanical and Bioactivity Properties of a Nano Structure-hardystonite Scaffold by the Space Holder Method [Volume 37, Issue 1, 2018, Pages 55-67]
-
Sadrnezhaad, S. Kh.
Two-Phase Rutile/Anatase TiO2 Nanoleafed Nanorod Arrays for Photoelectrochemical Applications [Volume 37, Issue 2, 2018, Pages 69-79]
-
Salehi, H.
First Principeles Initio Study of the Electronic and Optical Properties of Bulk TiC and Its Narrow Nanowires by Density Functional Theory [Volume 37, Issue 1, 2018, Pages 83-96]
-
Seifollahi, M.
The Effect of Mg on Microstructure and High Temperature Mechanical Properties of Hasteloy X Superalloy [Volume 37, Issue 2, 2018, Pages 29-37]
-
Shahmiri, M.
The Effect of Boron and Zirconium on the Microstructure and Mechanical Properties of Cast Fe3Al-Based Alloys [Volume 37, Issue 4, 2019, Pages 43-57]
-
Shams, S. F.
Modeling and Mechanical Analysis of Biphasic Calcium Phosphate/Silk Composite Bone Plate for Fractured Tibia Healing [Volume 37, Issue 2, 2018, Pages 59-67]
-
Soltanieh, M.
Investigating the Effect of Ethanol and Ascorbic Acid on Titanium Dioxide Extraction from Ilmenite by Oxalic Acid [Volume 37, Issue 1, 2018, Pages 11-25]
T
-
Tafreshi, M.
A Comparative Investigation into Corrosion and Wear Properties of Zn-Ni and Zn-Ni/PTFE Coatings [Volume 37, Issue 3, 2018, Pages 49-62]
-
Talebi, Z.
The Effect of Catalyst and Water Content of the Hydrolysis Step on the Physical Properties of Silica Aerogel Dried at the Ambient Pressure [Volume 37, Issue 1, 2018, Pages 27-35]
-
Tavakoli dehaghi, Sh.
Preparation and Characterization of PDMS-SiO2-CuO Nanocomposite Coating on Stainless Steel and Its Super-hydrophobicity Property [Volume 37, Issue 3, 2018, Pages 1-12]
-
Tavoosi, M.
The Formation of Al3Ti Intermetallic compound at the junction interface of Titanium-Aluminum diffusional Coupling by Means of Diffusional Annealing Process [Volume 37, Issue 1, 2018, Pages 37-44]
-
Tavoosi, M.
Investigation of the Optical Properties of GeO2-PbO-CaO-SrO Glass System in the Presence of Different Amounts of CaO and SrO [Volume 37, Issue 3, 2018, Pages 107-119]
V
-
Vahedi, A.
The Effect of Tartrate Ion on the Separation Behavior of Zinc and Cadmium in the Sulfate Solution [Volume 37, Issue 3, 2018, Pages 63-73]
Z
-
Zahraei, M.
The Effect of pH and Duration of Hydrothermal Process on the Synthesis of Manganese Ferrite Nanoparticles [Volume 37, Issue 1, 2018, Pages 105-111]
-
Zakeri, A.
Optimization of the Selective Dissolution of Li from the Spent Li-ion Batteries using Oxalic Acid by a Response Surface Methodology [Volume 37, Issue 3, 2018, Pages 87-105]
-
Zaminpayma, E.
A study on the Adsorption of Graphene/Graphene Oxideâreinforced Polymer âNanocomposites using Reactive Molecular Dynamics [Volume 37, Issue 3, 2018, Pages 25-47]
-
Zandrahimi, M.
Investigation of Isothermal and Cyclic Oxidation Behavior of Codeposited 430 Ferritic Stainless Steel with Aluminum and Titanium [Volume 37, Issue 3, 2018, Pages 13-23]
-
Zandrahimi, M.
An Investigation Into the Properties of MoS2-Cr Coatings Produced by DC Magnetron Sputtering [Volume 37, Issue 4, 2019, Pages 25-41]
Your query does not match with any item