A
-
Aashuri, H.
The Effect of Temperature on the Fracture Surface Morphology and Ductility of La55Al25Ni5Cu10Co5 BMG [Volume 38, Issue 2, 2019, Pages 11-24]
-
Abbasi, M.
Fabrication of Poly(ε-Caprolactone), Hydrophilic and β-Tricalcium Phosphate Layer- by -Layer Nanofibrous Scaffolds for Tissue Engineering [Volume 38, Issue 1, 2019, Pages 23-35]
-
Abbasi, S. M.
Flow Behavior of SP-700 Titanium Alloy During Hot Tensile Deformation in α+β and β Phase Regions [Volume 38, Issue 1, 2019, Pages 37-48]
-
Abbasi, S. M.
Hot Deformation Behavior of Haynes 25 by the Hot Tensile Test [Volume 38, Issue 2, 2019, Pages 1-10]
-
Abbasi, S. M.
The Effect of Platinum Layer and Aluminizing Process on Surface Roughness of Coated Superalloy by Pt-Al [Volume 38, Issue 2, 2019, Pages 35-53]
-
Abdollahzadeh, A.
Boriding of In-738 Superalloy via the Pack Cementation Method and the Study of the Kinetic of Boride Layer Formation [Volume 38, Issue 1, 2019, Pages 76-86]
-
Afrashi, M.
Adsorption of Fluconazole Drug on Silica Aerogelâ by Immersion Method and Investigation of the Rate and Mechanism of Drug Release [Volume 38, Issue 2, 2019, Pages 25-34]
-
Aghaei, A.
Fabrication of MgF2-SiO2 Nanocomposite Thin Films and Investigation of Their Optical and Hydrophobic Properties [Volume 38, Issue 2, 2019, Pages 91-104]
-
Alhaji, A.
Effect of Calcination Temperature and Li / TFA Molar Ratio on Morphology and Phase of Lithium Fluoride Nanoparticles Produced by Fluorolytic Sol-Gel Method [Volume 38, Issue 3, 2019, Pages 29-39]
-
Alhaji, A.
Effect of Chelating Agent on Morphology and Phase Evolution of Spinel Nanoparticles Synthesized via Sol-Gel Method [Volume 38, Issue 4, 2020, Pages 33-42]
-
Alipour Mogadam, R.
Mechanical Properties and Spring -Back Investigation in Creep Age Forming Process of 7075 Al Alloy [Volume 38, Issue 2, 2019, Pages 55-67]
-
Alirezaei Varnosfaderani, N.
Effect of Annealing Temperature on the Structural, Magnetic and Optical Properties of SrCo2Fe16O27 Hexaferrite Nanostructure [Volume 38, Issue 3, 2019, Pages 41-55]
-
Amanpour, S.
Investigating the Release of Methotrexate and 5-Fluorouracil Anticancer Drugs from Multi-Layered Nanofiber Structure of Polycaprolactone/Chitosan [Volume 38, Issue 4, 2020, Pages 1-17]
-
Amiri, P.
Ab-Initio Study of Optical and Magnetic Properties of Tungsten Disulfide [Volume 38, Issue 4, 2020, Pages 43-50]
-
Ansar, M. M
Fabrication of Poly(ε-Caprolactone), Hydrophilic and β-Tricalcium Phosphate Layer- by -Layer Nanofibrous Scaffolds for Tissue Engineering [Volume 38, Issue 1, 2019, Pages 23-35]
-
Asadi Khanouki, M. T.
The Effect of Temperature on the Fracture Surface Morphology and Ductility of La55Al25Ni5Cu10Co5 BMG [Volume 38, Issue 2, 2019, Pages 11-24]
-
Ashrafizadeh, F.
Corrosion Fatigue of 17-4pH Stainless Steel in a Simulated Sea Water Solution [Volume 38, Issue 2, 2019, Pages 69-81]
B
-
Bahrami, A.
Investigating the Joining of Ni3Al Intermetallic Compound, using Transient Liquid Phase (TLP) Method with Cu Interlayer [Volume 38, Issue 4, 2020, Pages 19-31]
-
Barjesteh, M.
The Effect of Platinum Layer and Aluminizing Process on Surface Roughness of Coated Superalloy by Pt-Al [Volume 38, Issue 2, 2019, Pages 35-53]
D
-
Dabir, F.
Boriding of In-738 Superalloy via the Pack Cementation Method and the Study of the Kinetic of Boride Layer Formation [Volume 38, Issue 1, 2019, Pages 76-86]
-
Darudi, A.
Preparation and Characterization of Cerium Doped Titanium Dioxide Nanoparticles by the Electrical Discharge Method [Volume 38, Issue 2, 2019, Pages 83-90]
E
-
Ebrahimifar, H.
Oxidation and Electrical Behavior of Crofer 22APU Steel with the Co/Y2O3 Coating Produced by Direct Electroplating [Volume 38, Issue 1, 2019, Pages 87-102]
-
Ebrahimifar, H.
Investigation on the Microstructure, Oxidation and Electrical Behavior of Ti-coated Crofer 22APU Steel for SOFC Interconnect Applications [Volume 38, Issue 3, 2019, Pages 1-13]
-
Ekhlaspour, F.
Investigation on the Microstructure, Oxidation and Electrical Behavior of Ti-coated Crofer 22APU Steel for SOFC Interconnect Applications [Volume 38, Issue 3, 2019, Pages 1-13]
-
Emadi, R.
Evaluation of Bioactivity and Corrosion Behavior of AZ91 Alloy with Polymer/Ceramic Composite Coating [Volume 38, Issue 3, 2019, Pages 73-85]
-
Emami, M.
A New Method for the Experimental Evaluation of High-Temperature Erosion-Corrosion in Fluidized Bed Waste Incineration Conditions [Volume 38, Issue 3, 2019, Pages 101-113]
-
Esfahani, H.
Boriding of In-738 Superalloy via the Pack Cementation Method and the Study of the Kinetic of Boride Layer Formation [Volume 38, Issue 1, 2019, Pages 76-86]
-
Eshaghi, A.
Fabrication of MgF2-SiO2 Nanocomposite Thin Films and Investigation of Their Optical and Hydrophobic Properties [Volume 38, Issue 2, 2019, Pages 91-104]
-
Eshraghi, M.
The Effect of Zn- Cr Substitution on the Structural and Magnetic Properties of Cobalt Ferrite Nanoparticles [Volume 38, Issue 1, 2019, Pages 1-11]
-
Eslami, A.
Corrosion Fatigue of 17-4pH Stainless Steel in a Simulated Sea Water Solution [Volume 38, Issue 2, 2019, Pages 69-81]
F
-
Fadaeifard, F.
Corrosion Fatigue of 17-4pH Stainless Steel in a Simulated Sea Water Solution [Volume 38, Issue 2, 2019, Pages 69-81]
-
Faeghinia, A.
Investigation of Glass- Steel Slag Foam Composite Sintering in Presence of SiC [Volume 38, Issue 4, 2020, Pages 51-64]
-
Faghani, G. R.
TIG Surface Alloying of Ti-6Al-4V with Nitrogen and Chromium for Improved Tribological Properties [Volume 38, Issue 4, 2020, Pages 65-74]
-
Farahmandjou, M.
Preparation and Characterization of Cerium Doped Titanium Dioxide Nanoparticles by the Electrical Discharge Method [Volume 38, Issue 2, 2019, Pages 83-90]
-
Farmanesh, Kh.
Investigation of the Effect of Pilgering Process Parameters on Deformation Behavior of an Austenitic Stainless Steel [Volume 38, Issue 3, 2019, Pages 57-71]
-
Fathi, M. H.
Synthesis and Characterization of Mechanical Behavior and Thermal Shock Resistance of Macro-Porous SiC Solar Absorber [Volume 38, Issue 4, 2020, Pages 87-101]
G
-
Ghalibaf Tousi, H.
Effect of Chelating Agent on Morphology and Phase Evolution of Spinel Nanoparticles Synthesized via Sol-Gel Method [Volume 38, Issue 4, 2020, Pages 33-42]
-
Ghasemian Malakshah, M.
Corrosion Fatigue of 17-4pH Stainless Steel in a Simulated Sea Water Solution [Volume 38, Issue 2, 2019, Pages 69-81]
H
-
Hakimi, M.
Improving the Magnetic Properties Co2FeSi Heusler Compound by Modifying the Crystalline Order in Different Manufacturing Procedures [Volume 38, Issue 1, 2019, Pages 13-21]
-
Hayashi, Sh.
A New Method for the Experimental Evaluation of High-Temperature Erosion-Corrosion in Fluidized Bed Waste Incineration Conditions [Volume 38, Issue 3, 2019, Pages 101-113]
J
-
Jafari, A.
Preparation and Characterization of Cerium Doped Titanium Dioxide Nanoparticles by the Electrical Discharge Method [Volume 38, Issue 2, 2019, Pages 83-90]
-
Jafar Tafreshi, M.
Synthesis & Characterization of CaB4O7 Powder by Solid-State Reaction [Volume 38, Issue 1, 2019, Pages 65-74]
K
-
Karimzadeh, F.
Investigating the Joining of Ni3Al Intermetallic Compound, using Transient Liquid Phase (TLP) Method with Cu Interlayer [Volume 38, Issue 4, 2020, Pages 19-31]
-
Khademi, S.
Preparation and Characterization of Cerium Doped Titanium Dioxide Nanoparticles by the Electrical Discharge Method [Volume 38, Issue 2, 2019, Pages 83-90]
-
Khajeh-Amiri, A. R.
TIG Surface Alloying of Ti-6Al-4V with Nitrogen and Chromium for Improved Tribological Properties [Volume 38, Issue 4, 2020, Pages 65-74]
-
Kharaziha, M.
Influence of Cu Element on Degradation Rate and Biological Properties of Mg-Al-Cu Alloy Prepared by Spark Plasma Sintering [Volume 38, Issue 3, 2019, Pages 87-99]
-
Kharaziha, M.
Influence of Cu Element on Degradation Rate and Biological Properties of Mg-Al-Cu Alloy Prepared by Spark Plasma Sintering [Volume 38, Issue 3, 2019, Pages 87-99]
L
-
Loghman Estarki, M. R.
Effect of Calcination Temperature and Li / TFA Molar Ratio on Morphology and Phase of Lithium Fluoride Nanoparticles Produced by Fluorolytic Sol-Gel Method [Volume 38, Issue 3, 2019, Pages 29-39]
-
Loghman Estarki, M. R.
Effect of Chelating Agent on Morphology and Phase Evolution of Spinel Nanoparticles Synthesized via Sol-Gel Method [Volume 38, Issue 4, 2020, Pages 33-42]
-
Lorak, A.
Investigation of Mode I Delamination Resistance in Inter-ply and Intra-ply Hybrid Composites Reinforced with Basalt/Nylon Woven Fabrics [Volume 38, Issue 3, 2019, Pages 15-27]
M
-
Maniei, M.
Fabrication of MgF2-SiO2 Nanocomposite Thin Films and Investigation of Their Optical and Hydrophobic Properties [Volume 38, Issue 2, 2019, Pages 91-104]
-
Mardi, H.
Investigation of Glass- Steel Slag Foam Composite Sintering in Presence of SiC [Volume 38, Issue 4, 2020, Pages 51-64]
-
Mashhadi, M.
Synthesis of HfB2 Powders by Carbothermal Reduction [Volume 38, Issue 4, 2020, Pages 75-85]
-
Mohammadi Bodaghabadi, F.
Effect of Calcination Temperature and Li / TFA Molar Ratio on Morphology and Phase of Lithium Fluoride Nanoparticles Produced by Fluorolytic Sol-Gel Method [Volume 38, Issue 3, 2019, Pages 29-39]
-
Mohammad Sharifi, E.
Investigation of the Effect of Pilgering Process Parameters on Deformation Behavior of an Austenitic Stainless Steel [Volume 38, Issue 3, 2019, Pages 57-71]
-
Mohammad Sharifi, E.
Effect of Chelating Agent on Morphology and Phase Evolution of Spinel Nanoparticles Synthesized via Sol-Gel Method [Volume 38, Issue 4, 2020, Pages 33-42]
-
Morakkabati, M.
Flow Behavior of SP-700 Titanium Alloy During Hot Tensile Deformation in α+β and β Phase Regions [Volume 38, Issue 1, 2019, Pages 37-48]
-
Mosleh, Z.
The Effect of Zn- Cr Substitution on the Structural and Magnetic Properties of Cobalt Ferrite Nanoparticles [Volume 38, Issue 1, 2019, Pages 1-11]
-
Mousavi Ghahfarokhi, S. E.
Effect of Annealing Temperature on the Structural, Magnetic and Optical Properties of SrCo2Fe16O27 Hexaferrite Nanostructure [Volume 38, Issue 3, 2019, Pages 41-55]
-
Musazadeh, M. H.
Investigation of the Effect of Pilgering Process Parameters on Deformation Behavior of an Austenitic Stainless Steel [Volume 38, Issue 3, 2019, Pages 57-71]
N
-
Nosraty, H.
Investigation of Mode I Delamination Resistance in Inter-ply and Intra-ply Hybrid Composites Reinforced with Basalt/Nylon Woven Fabrics [Volume 38, Issue 3, 2019, Pages 15-27]
P
-
Parvanian, A. R.
Synthesis and Characterization of Mechanical Behavior and Thermal Shock Resistance of Macro-Porous SiC Solar Absorber [Volume 38, Issue 4, 2020, Pages 87-101]
-
Poursharifi, N.
Investigating the Release of Methotrexate and 5-Fluorouracil Anticancer Drugs from Multi-Layered Nanofiber Structure of Polycaprolactone/Chitosan [Volume 38, Issue 4, 2020, Pages 1-17]
R
-
Rahimi, M.
The Effect of Zn- Cr Substitution on the Structural and Magnetic Properties of Cobalt Ferrite Nanoparticles [Volume 38, Issue 1, 2019, Pages 1-11]
-
Ramazani, M.
Effect of Calcination Temperature and Li / TFA Molar Ratio on Morphology and Phase of Lithium Fluoride Nanoparticles Produced by Fluorolytic Sol-Gel Method [Volume 38, Issue 3, 2019, Pages 29-39]
-
Ranjbar, Khalil
The Effect of Heat Treatment on the Microstructure and Mechanical Properties of Al/Al3Zr + Al3Ti In-situ Hybrid Composite Fabricated by Friction Stir Processing [Volume 38, Issue 1, 2019, Pages 49-64]
-
Rasouli Samar, M.
Boriding of In-738 Superalloy via the Pack Cementation Method and the Study of the Kinetic of Boride Layer Formation [Volume 38, Issue 1, 2019, Pages 76-86]
-
Rasuli, R.
Preparation and Characterization of Cerium Doped Titanium Dioxide Nanoparticles by the Electrical Discharge Method [Volume 38, Issue 2, 2019, Pages 83-90]
S
-
Saeedi, V.
Influence of Cu Element on Degradation Rate and Biological Properties of Mg-Al-Cu Alloy Prepared by Spark Plasma Sintering [Volume 38, Issue 3, 2019, Pages 87-99]
-
Saeidpour, F.
Oxidation and Electrical Behavior of Crofer 22APU Steel with the Co/Y2O3 Coating Produced by Direct Electroplating [Volume 38, Issue 1, 2019, Pages 87-102]
-
Safari, M.
Improving the Magnetic Properties Co2FeSi Heusler Compound by Modifying the Crystalline Order in Different Manufacturing Procedures [Volume 38, Issue 1, 2019, Pages 13-21]
-
Safari, N.
Influence of Cu Element on Degradation Rate and Biological Properties of Mg-Al-Cu Alloy Prepared by Spark Plasma Sintering [Volume 38, Issue 3, 2019, Pages 87-99]
-
Salehi, H.
Ab-Initio Study of Optical and Magnetic Properties of Tungsten Disulfide [Volume 38, Issue 4, 2020, Pages 43-50]
-
Salimijazi, H. R.
Synthesis and Characterization of Mechanical Behavior and Thermal Shock Resistance of Macro-Porous SiC Solar Absorber [Volume 38, Issue 4, 2020, Pages 87-101]
-
Samii Zafarghandi, M.
Hot Deformation Behavior of Haynes 25 by the Hot Tensile Test [Volume 38, Issue 2, 2019, Pages 1-10]
-
Sasani qhamsari, M.
Synthesis & Characterization of CaB4O7 Powder by Solid-State Reaction [Volume 38, Issue 1, 2019, Pages 65-74]
-
Semnani, D.
Adsorption of Fluconazole Drug on Silica Aerogelâ by Immersion Method and Investigation of the Rate and Mechanism of Drug Release [Volume 38, Issue 2, 2019, Pages 25-34]
-
Semnani, D.
Investigating the Release of Methotrexate and 5-Fluorouracil Anticancer Drugs from Multi-Layered Nanofiber Structure of Polycaprolactone/Chitosan [Volume 38, Issue 4, 2020, Pages 1-17]
-
Shahverdi, H. R.
Mechanical Properties and Spring -Back Investigation in Creep Age Forming Process of 7075 Al Alloy [Volume 38, Issue 2, 2019, Pages 55-67]
-
Sheikh, H.
Effect of Chelating Agent on Morphology and Phase Evolution of Spinel Nanoparticles Synthesized via Sol-Gel Method [Volume 38, Issue 4, 2020, Pages 33-42]
-
Sheikhali, A.
Flow Behavior of SP-700 Titanium Alloy During Hot Tensile Deformation in α+β and β Phase Regions [Volume 38, Issue 1, 2019, Pages 37-48]
-
Shirvani, K.
The Effect of Platinum Layer and Aluminizing Process on Surface Roughness of Coated Superalloy by Pt-Al [Volume 38, Issue 2, 2019, Pages 35-53]
-
Shirvani, M.
Synthesis of HfB2 Powders by Carbothermal Reduction [Volume 38, Issue 4, 2020, Pages 75-85]
-
Sohrabi, M.
Fabrication of Poly(ε-Caprolactone), Hydrophilic and β-Tricalcium Phosphate Layer- by -Layer Nanofibrous Scaffolds for Tissue Engineering [Volume 38, Issue 1, 2019, Pages 23-35]
-
Soleimani, F.
Evaluation of Bioactivity and Corrosion Behavior of AZ91 Alloy with Polymer/Ceramic Composite Coating [Volume 38, Issue 3, 2019, Pages 73-85]
-
Solgi, S.
Synthesis & Characterization of CaB4O7 Powder by Solid-State Reaction [Volume 38, Issue 1, 2019, Pages 65-74]
-
Soltani, P.
Investigating the Release of Methotrexate and 5-Fluorouracil Anticancer Drugs from Multi-Layered Nanofiber Structure of Polycaprolactone/Chitosan [Volume 38, Issue 4, 2020, Pages 1-17]
-
Soltani Samani, M.
Investigating the Joining of Ni3Al Intermetallic Compound, using Transient Liquid Phase (TLP) Method with Cu Interlayer [Volume 38, Issue 4, 2020, Pages 19-31]
T
-
Talebi, Z.
Adsorption of Fluconazole Drug on Silica Aerogelâ by Immersion Method and Investigation of the Rate and Mechanism of Drug Release [Volume 38, Issue 2, 2019, Pages 25-34]
-
Tavakoli, R.
The Effect of Temperature on the Fracture Surface Morphology and Ductility of La55Al25Ni5Cu10Co5 BMG [Volume 38, Issue 2, 2019, Pages 11-24]
-
Tehrani, M.
Investigation of Mode I Delamination Resistance in Inter-ply and Intra-ply Hybrid Composites Reinforced with Basalt/Nylon Woven Fabrics [Volume 38, Issue 3, 2019, Pages 15-27]
-
Toroghinejad, M.
Influence of Cu Element on Degradation Rate and Biological Properties of Mg-Al-Cu Alloy Prepared by Spark Plasma Sintering [Volume 38, Issue 3, 2019, Pages 87-99]
V
-
Vafaei, R.
Investigation of the Effect of Pilgering Process Parameters on Deformation Behavior of an Austenitic Stainless Steel [Volume 38, Issue 3, 2019, Pages 57-71]
Y
-
Yosofi, M.
Synthesis of HfB2 Powders by Carbothermal Reduction [Volume 38, Issue 4, 2020, Pages 75-85]
Z
-
Zadali Mohammad Kotiyani, M.
The Effect of Heat Treatment on the Microstructure and Mechanical Properties of Al/Al3Zr + Al3Ti In-situ Hybrid Composite Fabricated by Friction Stir Processing [Volume 38, Issue 1, 2019, Pages 49-64]
-
Zandrahimi, M.
Oxidation and Electrical Behavior of Crofer 22APU Steel with the Co/Y2O3 Coating Produced by Direct Electroplating [Volume 38, Issue 1, 2019, Pages 87-102]
-
Zandrahimi, M.
Investigation on the Microstructure, Oxidation and Electrical Behavior of Ti-coated Crofer 22APU Steel for SOFC Interconnect Applications [Volume 38, Issue 3, 2019, Pages 1-13]
-
Zangeneh Madar, K.
The Effect of Platinum Layer and Aluminizing Process on Surface Roughness of Coated Superalloy by Pt-Al [Volume 38, Issue 2, 2019, Pages 35-53]
-
Zargar Shoushtari, M.
Effect of Annealing Temperature on the Structural, Magnetic and Optical Properties of SrCo2Fe16O27 Hexaferrite Nanostructure [Volume 38, Issue 3, 2019, Pages 41-55]
-
Zhulayi Bakhoda, N.
Ab-Initio Study of Optical and Magnetic Properties of Tungsten Disulfide [Volume 38, Issue 4, 2020, Pages 43-50]
Your query does not match with any item