Keyword Index

A

  • AISI 321 statinless steel Investigation of the Effect of Pilgering Process Parameters on Deformation Behavior of an Austenitic Stainless Steel [Volume 38, Issue 3, 2019, Pages 57-71]
  • Al3Zr and Al3Ti reinforcement particles The Effect of Heat Treatment on the Microstructure and Mechanical Properties of Al/Al3Zr + Al3Ti In-situ Hybrid Composite Fabricated by Friction Stir Processing [Volume 38, Issue 1, 2019, Pages 49-64]
  • Anionic groups Synthesis & Characterization of CaB4O7 Powder by Solid-State Reaction [Volume 38, Issue 1, 2019, Pages 65-74]
  • Annealing Temperature Effect of Annealing Temperature on the Structural, Magnetic and Optical Properties of SrCo2Fe16O27 Hexaferrite Nanostructure [Volume 38, Issue 3, 2019, Pages 41-55]
  • Antibacterial Properties Influence of Cu Element on Degradation Rate and Biological Properties of Mg-Al-Cu Alloy Prepared by Spark Plasma Sintering [Volume 38, Issue 3, 2019, Pages 87-99]
  • Arc-melting Improving the Magnetic Properties Co2FeSi Heusler Compound by Modifying the Crystalline Order in Different Manufacturing Procedures [Volume 38, Issue 1, 2019, Pages 13-21]

B

  • Baghdadite Evaluation of Bioactivity and Corrosion Behavior of AZ91 Alloy with Polymer/Ceramic Composite Coating [Volume 38, Issue 3, 2019, Pages 73-85]
  • Basalt Investigation of Mode I Delamination Resistance in Inter-ply and Intra-ply Hybrid Composites Reinforced with Basalt/Nylon Woven Fabrics [Volume 38, Issue 3, 2019, Pages 15-27]
  • Bioactivity Evaluation of Bioactivity and Corrosion Behavior of AZ91 Alloy with Polymer/Ceramic Composite Coating [Volume 38, Issue 3, 2019, Pages 73-85]
  • Boric acid Synthesis of HfB2 Powders by Carbothermal Reduction [Volume 38, Issue 4, 2019, Pages 75-85]
  • Boriding Boriding of In-738 Superalloy via the Pack Cementation Method and the Study of the Kinetic of Boride Layer Formation [Volume 38, Issue 1, 2019, Pages 76-86]
  • Bulk metallic glass The Effect of Temperature on the Fracture Surface Morphology and Ductility of La55Al25Ni5Cu10Co5 BMG [Volume 38, Issue 2, 2019, Pages 11-24]

C

  • Calcination temprature Effect of Calcination Temperature and Li / TFA Molar Ratio on Morphology and Phase of Lithium Fluoride Nanoparticles Produced by Fluorolytic Sol-Gel Method [Volume 38, Issue 3, 2019, Pages 29-39]
  • Calcium tetraborate (CaB4O7) Synthesis & Characterization of CaB4O7 Powder by Solid-State Reaction [Volume 38, Issue 1, 2019, Pages 65-74]
  • Carbide Hot Deformation Behavior of Haynes 25 by the Hot Tensile Test [Volume 38, Issue 2, 2019, Pages 1-10]
  • Cerium dopant Preparation and Characterization of Cerium Doped Titanium Dioxide Nanoparticles by the Electrical Discharge Method [Volume 38, Issue 2, 2019, Pages 83-90]
  • Chelate agent Effect of Chelating Agent on Morphology and Phase Evolution of Spinel Nanoparticles Synthesized via Sol-Gel Method [Volume 38, Issue 4, 2019, Pages 33-42]
  • Chitosan Evaluation of Bioactivity and Corrosion Behavior of AZ91 Alloy with Polymer/Ceramic Composite Coating [Volume 38, Issue 3, 2019, Pages 73-85]
  • Chitosan Investigating the Release of Methotrexate and 5-Fluorouracil Anticancer Drugs from Multi-Layered Nanofiber Structure of Polycaprolactone/Chitosan [Volume 38, Issue 4, 2019, Pages 1-17]
  • Co Oxidation and Electrical Behavior of Crofer 22APU Steel with the Co/Y2O3 Coating Produced by Direct Electroplating [Volume 38, Issue 1, 2019, Pages 87-102]
  • Coating Microstructure The Effect of Platinum Layer and Aluminizing Process on Surface Roughness of Coated Superalloy by Pt-Al [Volume 38, Issue 2, 2019, Pages 35-53]
  • Cobalt Ferrite The Effect of Zn- Cr Substitution on the Structural and Magnetic Properties of Cobalt Ferrite Nanoparticles [Volume 38, Issue 1, 2019, Pages 1-11]
  • Coercivity milling Improving the Magnetic Properties Co2FeSi Heusler Compound by Modifying the Crystalline Order in Different Manufacturing Procedures [Volume 38, Issue 1, 2019, Pages 13-21]
  • Complex agent Effect of Chelating Agent on Morphology and Phase Evolution of Spinel Nanoparticles Synthesized via Sol-Gel Method [Volume 38, Issue 4, 2019, Pages 33-42]
  • Core-shell Improving the Magnetic Properties Co2FeSi Heusler Compound by Modifying the Crystalline Order in Different Manufacturing Procedures [Volume 38, Issue 1, 2019, Pages 13-21]
  • Corrosion Evaluation of Bioactivity and Corrosion Behavior of AZ91 Alloy with Polymer/Ceramic Composite Coating [Volume 38, Issue 3, 2019, Pages 73-85]
  • Corrosion fatigue Corrosion Fatigue of 17-4pH Stainless Steel in a Simulated Sea Water Solution [Volume 38, Issue 2, 2019, Pages 69-81]
  • Cr and Zn substituted The Effect of Zn- Cr Substitution on the Structural and Magnetic Properties of Cobalt Ferrite Nanoparticles [Volume 38, Issue 1, 2019, Pages 1-11]
  • Creep-age Forming Mechanical Properties and Spring -Back Investigation in Creep Age Forming Process of 7075 Al Alloy [Volume 38, Issue 2, 2019, Pages 55-67]
  • Crofer 22 APU Oxidation and Electrical Behavior of Crofer 22APU Steel with the Co/Y2O3 Coating Produced by Direct Electroplating [Volume 38, Issue 1, 2019, Pages 87-102]
  • Crofer 22APU stainless steel Investigation on the Microstructure, Oxidation and Electrical Behavior of Ti-coated Crofer 22APU Steel for SOFC Interconnect Applications [Volume 38, Issue 3, 2019, Pages 1-13]
  • Crystalline ordering Improving the Magnetic Properties Co2FeSi Heusler Compound by Modifying the Crystalline Order in Different Manufacturing Procedures [Volume 38, Issue 1, 2019, Pages 13-21]
  • Cytotoxicity Influence of Cu Element on Degradation Rate and Biological Properties of Mg-Al-Cu Alloy Prepared by Spark Plasma Sintering [Volume 38, Issue 3, 2019, Pages 87-99]

D

  • Damage analysis Investigation of the Effect of Pilgering Process Parameters on Deformation Behavior of an Austenitic Stainless Steel [Volume 38, Issue 3, 2019, Pages 57-71]
  • Degradation rate Influence of Cu Element on Degradation Rate and Biological Properties of Mg-Al-Cu Alloy Prepared by Spark Plasma Sintering [Volume 38, Issue 3, 2019, Pages 87-99]
  • Delamination Investigation of Mode I Delamination Resistance in Inter-ply and Intra-ply Hybrid Composites Reinforced with Basalt/Nylon Woven Fabrics [Volume 38, Issue 3, 2019, Pages 15-27]
  • Drug delivery Adsorption of Fluconazole Drug on Silica Aerogel‌ by Immersion Method and Investigation of the Rate and Mechanism of Drug Release [Volume 38, Issue 2, 2019, Pages 25-34]
  • Drug delivery Investigating the Release of Methotrexate and 5-Fluorouracil Anticancer Drugs from Multi-Layered Nanofiber Structure of Polycaprolactone/Chitosan [Volume 38, Issue 4, 2019, Pages 1-17]
  • Drug loading Adsorption of Fluconazole Drug on Silica Aerogel‌ by Immersion Method and Investigation of the Rate and Mechanism of Drug Release [Volume 38, Issue 2, 2019, Pages 25-34]
  • Ductility Hot Deformation Behavior of Haynes 25 by the Hot Tensile Test [Volume 38, Issue 2, 2019, Pages 1-10]
  • Ductility The Effect of Temperature on the Fracture Surface Morphology and Ductility of La55Al25Ni5Cu10Co5 BMG [Volume 38, Issue 2, 2019, Pages 11-24]
  • Dynamic recovery Flow Behavior of SP-700 Titanium Alloy During Hot Tensile Deformation in α+β and β Phase Regions [Volume 38, Issue 1, 2019, Pages 37-48]
  • Dynamic recrystallization Hot Deformation Behavior of Haynes 25 by the Hot Tensile Test [Volume 38, Issue 2, 2019, Pages 1-10]

E

  • Electrical discharge method Preparation and Characterization of Cerium Doped Titanium Dioxide Nanoparticles by the Electrical Discharge Method [Volume 38, Issue 2, 2019, Pages 83-90]
  • Elongation Flow Behavior of SP-700 Titanium Alloy During Hot Tensile Deformation in α+β and β Phase Regions [Volume 38, Issue 1, 2019, Pages 37-48]
  • Ethylenediamine Effect of Chelating Agent on Morphology and Phase Evolution of Spinel Nanoparticles Synthesized via Sol-Gel Method [Volume 38, Issue 4, 2019, Pages 33-42]

F

  • Finite element simulation Investigation of the Effect of Pilgering Process Parameters on Deformation Behavior of an Austenitic Stainless Steel [Volume 38, Issue 3, 2019, Pages 57-71]
  • Flow softening Flow Behavior of SP-700 Titanium Alloy During Hot Tensile Deformation in α+β and β Phase Regions [Volume 38, Issue 1, 2019, Pages 37-48]
  • Fluconazole Adsorption of Fluconazole Drug on Silica Aerogel‌ by Immersion Method and Investigation of the Rate and Mechanism of Drug Release [Volume 38, Issue 2, 2019, Pages 25-34]
  • Fluidized bed incineration A New Method for the Experimental Evaluation of High-Temperature Erosion-Corrosion in Fluidized Bed Waste Incineration Conditions [Volume 38, Issue 3, 2019, Pages 101-113]
  • Foam Investigation of Glass- Steel Slag Foam Composite Sintering in Presence of SiC [Volume 38, Issue 4, 2019, Pages 51-64]
  • Fracture surface morphology The Effect of Temperature on the Fracture Surface Morphology and Ductility of La55Al25Ni5Cu10Co5 BMG [Volume 38, Issue 2, 2019, Pages 11-24]
  • Fracture toughness Investigation of Mode I Delamination Resistance in Inter-ply and Intra-ply Hybrid Composites Reinforced with Basalt/Nylon Woven Fabrics [Volume 38, Issue 3, 2019, Pages 15-27]
  • Friction stir processing The Effect of Heat Treatment on the Microstructure and Mechanical Properties of Al/Al3Zr + Al3Ti In-situ Hybrid Composite Fabricated by Friction Stir Processing [Volume 38, Issue 1, 2019, Pages 49-64]

G

  • Glass Investigation of Glass- Steel Slag Foam Composite Sintering in Presence of SiC [Volume 38, Issue 4, 2019, Pages 51-64]
  • Glycerol Effect of Chelating Agent on Morphology and Phase Evolution of Spinel Nanoparticles Synthesized via Sol-Gel Method [Volume 38, Issue 4, 2019, Pages 33-42]

H

  • Hardness Boriding of In-738 Superalloy via the Pack Cementation Method and the Study of the Kinetic of Boride Layer Formation [Volume 38, Issue 1, 2019, Pages 76-86]
  • Hardness TIG Surface Alloying of Ti-6Al-4V with Nitrogen and Chromium for Improved Tribological Properties [Volume 38, Issue 4, 2019, Pages 65-74]
  • Heat exchanger A New Method for the Experimental Evaluation of High-Temperature Erosion-Corrosion in Fluidized Bed Waste Incineration Conditions [Volume 38, Issue 3, 2019, Pages 101-113]
  • Heat treatment The Effect of Heat Treatment on the Microstructure and Mechanical Properties of Al/Al3Zr + Al3Ti In-situ Hybrid Composite Fabricated by Friction Stir Processing [Volume 38, Issue 1, 2019, Pages 49-64]
  • Heat treatment Synthesis of HfB2 Powders by Carbothermal Reduction [Volume 38, Issue 4, 2019, Pages 75-85]
  • Heusler alloys Improving the Magnetic Properties Co2FeSi Heusler Compound by Modifying the Crystalline Order in Different Manufacturing Procedures [Volume 38, Issue 1, 2019, Pages 13-21]
  • HfB2 Synthesis of HfB2 Powders by Carbothermal Reduction [Volume 38, Issue 4, 2019, Pages 75-85]
  • High-temperature erosion-corrosion A New Method for the Experimental Evaluation of High-Temperature Erosion-Corrosion in Fluidized Bed Waste Incineration Conditions [Volume 38, Issue 3, 2019, Pages 101-113]
  • Hot deformation Hot Deformation Behavior of Haynes 25 by the Hot Tensile Test [Volume 38, Issue 2, 2019, Pages 1-10]
  • Hot tensile test Flow Behavior of SP-700 Titanium Alloy During Hot Tensile Deformation in α+β and β Phase Regions [Volume 38, Issue 1, 2019, Pages 37-48]
  • Hydrophobicity Fabrication of MgF2-SiO2 Nanocomposite Thin Films and Investigation of Their Optical and Hydrophobic Properties [Volume 38, Issue 2, 2019, Pages 91-104]

I

  • In-situ hybrid composite The Effect of Heat Treatment on the Microstructure and Mechanical Properties of Al/Al3Zr + Al3Ti In-situ Hybrid Composite Fabricated by Friction Stir Processing [Volume 38, Issue 1, 2019, Pages 49-64]
  • Intermetallic Investigating the Joining of Ni3Al Intermetallic Compound, using Transient Liquid Phase (TLP) Method with Cu Interlayer [Volume 38, Issue 4, 2019, Pages 19-31]
  • Inter-ply Hybrid Investigation of Mode I Delamination Resistance in Inter-ply and Intra-ply Hybrid Composites Reinforced with Basalt/Nylon Woven Fabrics [Volume 38, Issue 3, 2019, Pages 15-27]
  • Intra-ply Hybrid Investigation of Mode I Delamination Resistance in Inter-ply and Intra-ply Hybrid Composites Reinforced with Basalt/Nylon Woven Fabrics [Volume 38, Issue 3, 2019, Pages 15-27]

J

  • Joining Investigating the Joining of Ni3Al Intermetallic Compound, using Transient Liquid Phase (TLP) Method with Cu Interlayer [Volume 38, Issue 4, 2019, Pages 19-31]

K

  • Kinetic Boriding of In-738 Superalloy via the Pack Cementation Method and the Study of the Kinetic of Boride Layer Formation [Volume 38, Issue 1, 2019, Pages 76-86]

L

  • Layer- by -layer electrospinning Fabrication of Poly(ε-Caprolactone), Hydrophilic and β-Tricalcium Phosphate Layer- by -Layer Nanofibrous Scaffolds for Tissue Engineering [Volume 38, Issue 1, 2019, Pages 23-35]
  • Lithium fluoride Effect of Calcination Temperature and Li / TFA Molar Ratio on Morphology and Phase of Lithium Fluoride Nanoparticles Produced by Fluorolytic Sol-Gel Method [Volume 38, Issue 3, 2019, Pages 29-39]

M

  • Magnesium alloy Influence of Cu Element on Degradation Rate and Biological Properties of Mg-Al-Cu Alloy Prepared by Spark Plasma Sintering [Volume 38, Issue 3, 2019, Pages 87-99]
  • Metal- borate Synthesis & Characterization of CaB4O7 Powder by Solid-State Reaction [Volume 38, Issue 1, 2019, Pages 65-74]
  • Methotrexate Investigating the Release of Methotrexate and 5-Fluorouracil Anticancer Drugs from Multi-Layered Nanofiber Structure of Polycaprolactone/Chitosan [Volume 38, Issue 4, 2019, Pages 1-17]
  • Modification Fabrication of MgF2-SiO2 Nanocomposite Thin Films and Investigation of Their Optical and Hydrophobic Properties [Volume 38, Issue 2, 2019, Pages 91-104]

N

  • Nanocrystal Preparation and Characterization of Cerium Doped Titanium Dioxide Nanoparticles by the Electrical Discharge Method [Volume 38, Issue 2, 2019, Pages 83-90]
  • Nanofibers Investigating the Release of Methotrexate and 5-Fluorouracil Anticancer Drugs from Multi-Layered Nanofiber Structure of Polycaprolactone/Chitosan [Volume 38, Issue 4, 2019, Pages 1-17]
  • Nylon Investigation of Mode I Delamination Resistance in Inter-ply and Intra-ply Hybrid Composites Reinforced with Basalt/Nylon Woven Fabrics [Volume 38, Issue 3, 2019, Pages 15-27]

O

  • Optical properties Fabrication of MgF2-SiO2 Nanocomposite Thin Films and Investigation of Their Optical and Hydrophobic Properties [Volume 38, Issue 2, 2019, Pages 91-104]
  • Optical properties Effect of Annealing Temperature on the Structural, Magnetic and Optical Properties of SrCo2Fe16O27 Hexaferrite Nanostructure [Volume 38, Issue 3, 2019, Pages 41-55]
  • Optical properties Ab-Initio Study of Optical and Magnetic Properties of Tungsten Disulfide [Volume 38, Issue 4, 2019, Pages 43-50]
  • Optimal heat cycle Corrosion Fatigue of 17-4pH Stainless Steel in a Simulated Sea Water Solution [Volume 38, Issue 2, 2019, Pages 69-81]
  • Oxidation Oxidation and Electrical Behavior of Crofer 22APU Steel with the Co/Y2O3 Coating Produced by Direct Electroplating [Volume 38, Issue 1, 2019, Pages 87-102]
  • Oxidation Investigation on the Microstructure, Oxidation and Electrical Behavior of Ti-coated Crofer 22APU Steel for SOFC Interconnect Applications [Volume 38, Issue 3, 2019, Pages 1-13]

P

  • PFTS Fabrication of MgF2-SiO2 Nanocomposite Thin Films and Investigation of Their Optical and Hydrophobic Properties [Volume 38, Issue 2, 2019, Pages 91-104]
  • Phase diagram Synthesis & Characterization of CaB4O7 Powder by Solid-State Reaction [Volume 38, Issue 1, 2019, Pages 65-74]
  • Pilgering process Investigation of the Effect of Pilgering Process Parameters on Deformation Behavior of an Austenitic Stainless Steel [Volume 38, Issue 3, 2019, Pages 57-71]
  • Platin-Aluminide The Effect of Platinum Layer and Aluminizing Process on Surface Roughness of Coated Superalloy by Pt-Al [Volume 38, Issue 2, 2019, Pages 35-53]
  • Poly(caprolactone) Evaluation of Bioactivity and Corrosion Behavior of AZ91 Alloy with Polymer/Ceramic Composite Coating [Volume 38, Issue 3, 2019, Pages 73-85]
  • Polycaprolactone Investigating the Release of Methotrexate and 5-Fluorouracil Anticancer Drugs from Multi-Layered Nanofiber Structure of Polycaprolactone/Chitosan [Volume 38, Issue 4, 2019, Pages 1-17]
  • Poly(ε-caprolactone) Fabrication of Poly(ε-Caprolactone), Hydrophilic and β-Tricalcium Phosphate Layer- by -Layer Nanofibrous Scaffolds for Tissue Engineering [Volume 38, Issue 1, 2019, Pages 23-35]
  • Porous foam Synthesis and Characterization of Mechanical Behavior and Thermal Shock Resistance of Macro-Porous SiC Solar Absorber [Volume 38, Issue 4, 2019, Pages 87-101]
  • Powder synthesize Synthesis of HfB2 Powders by Carbothermal Reduction [Volume 38, Issue 4, 2019, Pages 75-85]
  • Precipitation Hardenable Stainless Steel Corrosion Fatigue of 17-4pH Stainless Steel in a Simulated Sea Water Solution [Volume 38, Issue 2, 2019, Pages 69-81]

R

  • Rene80 The Effect of Platinum Layer and Aluminizing Process on Surface Roughness of Coated Superalloy by Pt-Al [Volume 38, Issue 2, 2019, Pages 35-53]

S

  • Scaffold Fabrication of Poly(ε-Caprolactone), Hydrophilic and β-Tricalcium Phosphate Layer- by -Layer Nanofibrous Scaffolds for Tissue Engineering [Volume 38, Issue 1, 2019, Pages 23-35]
  • Shear band The Effect of Temperature on the Fracture Surface Morphology and Ductility of La55Al25Ni5Cu10Co5 BMG [Volume 38, Issue 2, 2019, Pages 11-24]
  • Shear Strength Investigating the Joining of Ni3Al Intermetallic Compound, using Transient Liquid Phase (TLP) Method with Cu Interlayer [Volume 38, Issue 4, 2019, Pages 19-31]
  • Shear transformation zone The Effect of Temperature on the Fracture Surface Morphology and Ductility of La55Al25Ni5Cu10Co5 BMG [Volume 38, Issue 2, 2019, Pages 11-24]
  • SiC Investigation of Glass- Steel Slag Foam Composite Sintering in Presence of SiC [Volume 38, Issue 4, 2019, Pages 51-64]
  • Silicon carbide Synthesis and Characterization of Mechanical Behavior and Thermal Shock Resistance of Macro-Porous SiC Solar Absorber [Volume 38, Issue 4, 2019, Pages 87-101]
  • Slag Investigation of Glass- Steel Slag Foam Composite Sintering in Presence of SiC [Volume 38, Issue 4, 2019, Pages 51-64]
  • S-N Curve Corrosion Fatigue of 17-4pH Stainless Steel in a Simulated Sea Water Solution [Volume 38, Issue 2, 2019, Pages 69-81]
  • Solar absorber Synthesis and Characterization of Mechanical Behavior and Thermal Shock Resistance of Macro-Porous SiC Solar Absorber [Volume 38, Issue 4, 2019, Pages 87-101]
  • Sol-gel Adsorption of Fluconazole Drug on Silica Aerogel‌ by Immersion Method and Investigation of the Rate and Mechanism of Drug Release [Volume 38, Issue 2, 2019, Pages 25-34]
  • Sol-gel Effect of Calcination Temperature and Li / TFA Molar Ratio on Morphology and Phase of Lithium Fluoride Nanoparticles Produced by Fluorolytic Sol-Gel Method [Volume 38, Issue 3, 2019, Pages 29-39]
  • Sol-Gel Auto-Combustion Effect of Annealing Temperature on the Structural, Magnetic and Optical Properties of SrCo2Fe16O27 Hexaferrite Nanostructure [Volume 38, Issue 3, 2019, Pages 41-55]
  • Solid-state reaction Synthesis & Characterization of CaB4O7 Powder by Solid-State Reaction [Volume 38, Issue 1, 2019, Pages 65-74]
  • SP-700 titanium alloy Flow Behavior of SP-700 Titanium Alloy During Hot Tensile Deformation in α+β and β Phase Regions [Volume 38, Issue 1, 2019, Pages 37-48]
  • Specific compressive strength Synthesis and Characterization of Mechanical Behavior and Thermal Shock Resistance of Macro-Porous SiC Solar Absorber [Volume 38, Issue 4, 2019, Pages 87-101]
  • Spinel Effect of Chelating Agent on Morphology and Phase Evolution of Spinel Nanoparticles Synthesized via Sol-Gel Method [Volume 38, Issue 4, 2019, Pages 33-42]
  • Spinel compositions Oxidation and Electrical Behavior of Crofer 22APU Steel with the Co/Y2O3 Coating Produced by Direct Electroplating [Volume 38, Issue 1, 2019, Pages 87-102]
  • Springback Mechanical Properties and Spring -Back Investigation in Creep Age Forming Process of 7075 Al Alloy [Volume 38, Issue 2, 2019, Pages 55-67]
  • Superalloy Boriding of In-738 Superalloy via the Pack Cementation Method and the Study of the Kinetic of Boride Layer Formation [Volume 38, Issue 1, 2019, Pages 76-86]
  • Superalloy Hot Deformation Behavior of Haynes 25 by the Hot Tensile Test [Volume 38, Issue 2, 2019, Pages 1-10]

T

  • Ti-6Al-4V alloy TIG Surface Alloying of Ti-6Al-4V with Nitrogen and Chromium for Improved Tribological Properties [Volume 38, Issue 4, 2019, Pages 65-74]
  • TIG process TIG Surface Alloying of Ti-6Al-4V with Nitrogen and Chromium for Improved Tribological Properties [Volume 38, Issue 4, 2019, Pages 65-74]
  • Tissue engineering Fabrication of Poly(ε-Caprolactone), Hydrophilic and β-Tricalcium Phosphate Layer- by -Layer Nanofibrous Scaffolds for Tissue Engineering [Volume 38, Issue 1, 2019, Pages 23-35]
  • Titanium Investigation on the Microstructure, Oxidation and Electrical Behavior of Ti-coated Crofer 22APU Steel for SOFC Interconnect Applications [Volume 38, Issue 3, 2019, Pages 1-13]
  • Transient liquid phase Investigating the Joining of Ni3Al Intermetallic Compound, using Transient Liquid Phase (TLP) Method with Cu Interlayer [Volume 38, Issue 4, 2019, Pages 19-31]
  • Tungsten disulfide Ab-Initio Study of Optical and Magnetic Properties of Tungsten Disulfide [Volume 38, Issue 4, 2019, Pages 43-50]

W

  • Wear TIG Surface Alloying of Ti-6Al-4V with Nitrogen and Chromium for Improved Tribological Properties [Volume 38, Issue 4, 2019, Pages 65-74]
  • W-type Hexaferrite Effect of Annealing Temperature on the Structural, Magnetic and Optical Properties of SrCo2Fe16O27 Hexaferrite Nanostructure [Volume 38, Issue 3, 2019, Pages 41-55]

X

  • X-ray Tomography Synthesis and Characterization of Mechanical Behavior and Thermal Shock Resistance of Macro-Porous SiC Solar Absorber [Volume 38, Issue 4, 2019, Pages 87-101]

Y

  • Y2O3 Oxidation and Electrical Behavior of Crofer 22APU Steel with the Co/Y2O3 Coating Produced by Direct Electroplating [Volume 38, Issue 1, 2019, Pages 87-102]

تحت نظارت وف ایرانی