A
-
Ahl Sarmadi, M.
Friction Stir Welding of Super Duplex Stainless Steel of UNS S32750, Its Microstructure Evaluation, Mechanical and Corrosion Properties [Volume 36, Issue 1, 2017, Pages 97-120]
-
Ahmadi, H.
The Effect of Nano-magnesia Addition on the Properties of Magnesite-hercynite Refractory Bricks Made with the Use of Convertor Mud [Volume 36, Issue 2, 2017, Pages 95-106]
-
Ahmadian, M.
The Wear Behavior of WC-Co and WC-FeAl-B Composites at Temperatures of Ambient and 300 ÌC [Volume 36, Issue 1, 2017, Pages 1-12]
-
Akbari, A. R.
Kinetics of Austenite Layer Growth on the Surface of Fe-23Cr-2.4Mo Ferritic Stainless Steel During Solution Nitriding [Volume 36, Issue 2, 2017, Pages 55-66]
-
Akbari, G. H.
Evaluation of Synthesizing Al2O3 Nano Particles in Copper Matrix by Mechanical Alloying of Cu-1% Al and Copper Oxide [Volume 36, Issue 1, 2017, Pages 71-85]
-
Akbari, G. H.
Evaluation of Synthesizing Al2O3 Nano Particles in Copper Matrix by Mechanical Alloying of Cu-1% Al and Copper Oxide [Volume 36, Issue 1, 2017, Pages 71-85]
-
Akbari, M.
Synthesis and Characterization of FeAl/Al2O3 Nanocomposite Coating on Carbon Steel Plate by High Energy Mechanical Alloying [Volume 36, Issue 2, 2017, Pages 107-117]
-
Akbarzadeh, F. Z.
Effect of Milling Time and 25Ce-75Ni Addition on Hydrogen Desorption Properties of Magnesium Hydride-based Composite Produced by Mechanical Alloying [Volume 36, Issue 4, 2018, Pages 31-43]
-
Alamolhoda, S.
Evaluating Phase Constituents, Magnetic Properties and Microstructure of Nickel Ferrite Nanoparticles Synthesized by Sol-Gel Auto-Combustion [Volume 36, Issue 2, 2017, Pages 47-54]
-
Alizadeh, A.
Synthesis and Characterisation of Al-Zn-Mg /3 wt. %Al2O3 Nanostructured Composite using a Pre-milled Matrix Through Mechanical Alloying [Volume 36, Issue 2, 2017, Pages 1-13]
-
Alizadeh, M.
Synthesis and Characterisation of Al-Zn-Mg /3 wt. %Al2O3 Nanostructured Composite using a Pre-milled Matrix Through Mechanical Alloying [Volume 36, Issue 2, 2017, Pages 1-13]
-
Amiri Moghaddam, A.
In-situ Synthesis of WC-Co Composite in WO3- Co3O4- C System by Carbothermic Reduction Method [Volume 36, Issue 1, 2017, Pages 121-130]
-
Amirjani, A.
Polyol as a Tunable Method for Synthesizing Null and One-dimensional Ag and Ag-Cu Nanostructures [Volume 36, Issue 4, 2018, Pages 117-126]
-
Asadrokht, M.
Kinetics of Copper Cementation by Aluminum Powder from Sulfate Solution under Ball Milling Conditions [Volume 36, Issue 1, 2017, Pages 87-96]
-
Asghari, A.
Study of Structural, Morphological and Optical Properties of Magnesium Hydroxide Nanoplates Synthesized by Precipitation Route [Volume 36, Issue 4, 2018, Pages 59-67]
-
Asghari, S.
Analysis of Pulsed Laser Welding Parameters Effect on Weld Geometry of 316L Stainless Steel using DOE [Volume 36, Issue 4, 2018, Pages 105-116]
-
Ashrafizade, F.
Preparation and Optimization of Alumina Templates for Synthesis of Strontium Ferrite Nanowires and Comparing them with Strontium Ferrite Nanopowders Synthesized with Sol Gel Method [Volume 36, Issue 3, 2017, Pages 11-22]
-
Ashrafizadeh, S. F.
Analysis of the Aging Process and Fatigue Behavior of 17-4 PH Stainless Steel [Volume 36, Issue 2, 2017, Pages 81-93]
-
Askari, M.
Evaluation of Microstructure and Magnetic Properties of Cobalt-based Amorphous Alloy Co70B20Si5Fe4Mo1 Produced by Melt Spinning and Mechanical Alloying [Volume 36, Issue 1, 2017, Pages 131-144]
-
Atapoor, M.
Friction Stir Welding of Super Duplex Stainless Steel of UNS S32750, Its Microstructure Evaluation, Mechanical and Corrosion Properties [Volume 36, Issue 1, 2017, Pages 97-120]
-
Azadrooy, D.
The Microstructural Study of in Situ Al Alloy 319 Based Composite Reinforced by Iron-Based Intermetallic Produced by Stir Casting Process [Volume 36, Issue 3, 2017, Pages 111-126]
B
-
Bakhshi, M. H.
Electrowinning of Nickel from Dilute Sulfate Solution [Volume 36, Issue 4, 2018, Pages 89-103]
-
Bakhshi, S. R.
Preparation and Optimization of Alumina Templates for Synthesis of Strontium Ferrite Nanowires and Comparing them with Strontium Ferrite Nanopowders Synthesized with Sol Gel Method [Volume 36, Issue 3, 2017, Pages 11-22]
-
Bakhtiari, H.
Effect of Standoff Distance and Explosive Material Thickness on Properties of Explosively Welded Copper and 304 Stainless Steel [Volume 36, Issue 3, 2017, Pages 35-50]
-
Barati, M.
Evaluation of Temperature Distribution in Thermal Forming Process of Steel Plate by Oxy-gas Source Line Heating [Volume 36, Issue 1, 2017, Pages 53-70]
-
Bazdar, F.
The Effect of Annealing Temperature on the Structural, Magnetic and Dielectric Properties of PbFe11.8Ni0.2O19 Nanoparticles [Volume 36, Issue 2, 2017, Pages 67-80]
-
Behjat, A.
Friction Stir Welding of Super Duplex Stainless Steel of UNS S32750, Its Microstructure Evaluation, Mechanical and Corrosion Properties [Volume 36, Issue 1, 2017, Pages 97-120]
-
Benvidi, N.
Evaluating Phase Constituents, Magnetic Properties and Microstructure of Nickel Ferrite Nanoparticles Synthesized by Sol-Gel Auto-Combustion [Volume 36, Issue 2, 2017, Pages 47-54]
-
Borhani, G. H.
The Function of Al2O3-TiB2/Fe Composite Reinforcements in Aluminum Matrix Composites [Volume 36, Issue 1, 2017, Pages 23-35]
-
Bozorgmehr, M.
Evaluation of Microstructure and Magnetic Properties of Cobalt-based Amorphous Alloy Co70B20Si5Fe4Mo1 Produced by Melt Spinning and Mechanical Alloying [Volume 36, Issue 1, 2017, Pages 131-144]
C
-
Chavilian, H.
Investigation of Hot Deformation Behavior of 321 Stainless Steel using Hot Compression Test and Modeling with Constitutive Equations [Volume 36, Issue 3, 2017, Pages 63-72]
D
-
Daneshvar e Asl, S.
Structural and Physical Properties of TiO2/CNT Nanocomposite Thin Films Synthesized by Sol-Gel Dip Coating Method for Using in Dye-Sensitized Solar Cell [Volume 36, Issue 3, 2017, Pages 101-109]
-
Dehghani Varnamkhasti, A.
The Effect of Nano-magnesia Addition on the Properties of Magnesite-hercynite Refractory Bricks Made with the Use of Convertor Mud [Volume 36, Issue 2, 2017, Pages 95-106]
E
-
Ebrahimi, F.
Preparation and Optimization of Alumina Templates for Synthesis of Strontium Ferrite Nanowires and Comparing them with Strontium Ferrite Nanopowders Synthesized with Sol Gel Method [Volume 36, Issue 3, 2017, Pages 11-22]
-
Edris, H.
Friction Stir Welding of Super Duplex Stainless Steel of UNS S32750, Its Microstructure Evaluation, Mechanical and Corrosion Properties [Volume 36, Issue 1, 2017, Pages 97-120]
-
Enayati, M. H.
Synthesis and Characterization of FeAl/Al2O3 Nanocomposite Coating on Carbon Steel Plate by High Energy Mechanical Alloying [Volume 36, Issue 2, 2017, Pages 107-117]
-
Esmaeilzadeh, M. K.
Static and Dynamic Magnetic Properties of La0.8Sr0.2MnO3 Nanoparticles [Volume 36, Issue 3, 2017, Pages 23-34]
F
-
Farjam Hajiagha, Kh.
Kinetics of Austenite Layer Growth on the Surface of Fe-23Cr-2.4Mo Ferritic Stainless Steel During Solution Nitriding [Volume 36, Issue 2, 2017, Pages 55-66]
-
Farmanesh, K.
Investigation of Hot Deformation Behavior of 321 Stainless Steel using Hot Compression Test and Modeling with Constitutive Equations [Volume 36, Issue 3, 2017, Pages 63-72]
-
Fathi, M.
Poly (hydroxybutyrate co hydroxyvalerate) Nanofibrous Scaffold Containing HydroxyapatiteBredigite Nanoparticles: Characterization and Biological Evaluation [Volume 36, Issue 3, 2017, Pages 87-99]
-
Fazlali, A. R.
Preparation of Lithium Ion Conductor Glass-Ceramic with High Conductivity for Producing Lithium-Air and all-Solid-State Lithium-Ion Batteries [Volume 36, Issue 1, 2017, Pages 37-52]
G
-
Ghasemi, B.
Study of Structural, Morphological and Optical Properties of Magnesium Hydroxide Nanoplates Synthesized by Precipitation Route [Volume 36, Issue 4, 2018, Pages 59-67]
-
Goodarzi, M.
Thermodynamic Description of the TiâO System using the Ionic Liquid Model for the Liquid Phase [Volume 36, Issue 3, 2017, Pages 73-85]
H
-
Haghshenas, D.
Polyol as a Tunable Method for Synthesizing Null and One-dimensional Ag and Ag-Cu Nanostructures [Volume 36, Issue 4, 2018, Pages 117-126]
-
Hajizamani, M.
Synthesis and Characterisation of Al-Zn-Mg /3 wt. %Al2O3 Nanostructured Composite using a Pre-milled Matrix Through Mechanical Alloying [Volume 36, Issue 2, 2017, Pages 1-13]
-
Hosseini, S. R.
Evaluation of Temperature Distribution in Thermal Forming Process of Steel Plate by Oxy-gas Source Line Heating [Volume 36, Issue 1, 2017, Pages 53-70]
-
Hosseinzadeh, M.
Evaluation of Microstructure and Magnetic Properties of Cobalt-based Amorphous Alloy Co70B20Si5Fe4Mo1 Produced by Melt Spinning and Mechanical Alloying [Volume 36, Issue 1, 2017, Pages 131-144]
I
-
Illbeigi, M.
Preparation of Lithium Ion Conductor Glass-Ceramic with High Conductivity for Producing Lithium-Air and all-Solid-State Lithium-Ion Batteries [Volume 36, Issue 1, 2017, Pages 37-52]
J
-
Jafarian, M.
Influence of Fe/Ba Molar Ratio on Phase Composition, Synthesis Temperature, Microstructure and Magnetic Properties of Barium Hexaferrite [Volume 36, Issue 1, 2017, Pages 13-22]
-
Jenabali-Jahromi, S.A.
Synthesis and Characterisation of Al-Zn-Mg /3 wt. %Al2O3 Nanostructured Composite using a Pre-milled Matrix Through Mechanical Alloying [Volume 36, Issue 2, 2017, Pages 1-13]
K
-
Kafili, G.
Optimization of Slip Casting Parameters of Alumina Yttria Nanocomposite Powder for Obtaining Transparent Yttrium Aluminum Garnet Ceramics [Volume 36, Issue 3, 2017, Pages 51-62]
-
Karimzadeh, F.
Synthesis and Characterization of FeAl/Al2O3 Nanocomposite Coating on Carbon Steel Plate by High Energy Mechanical Alloying [Volume 36, Issue 2, 2017, Pages 107-117]
-
Kazazi, M.
Preparation of Lithium Ion Conductor Glass-Ceramic with High Conductivity for Producing Lithium-Air and all-Solid-State Lithium-Ion Batteries [Volume 36, Issue 1, 2017, Pages 37-52]
-
Khanzadeh Gharah Shiran, M.R.
Effect of Standoff Distance and Explosive Material Thickness on Properties of Explosively Welded Copper and 304 Stainless Steel [Volume 36, Issue 3, 2017, Pages 35-50]
-
Khoobroo, M.
Improving the Surface Properties of Gray Cast Iron through In-Situ Alloying [Volume 36, Issue 3, 2017, Pages 1-10]
-
Kouhi, M.
Poly (hydroxybutyrate co hydroxyvalerate) Nanofibrous Scaffold Containing HydroxyapatiteBredigite Nanoparticles: Characterization and Biological Evaluation [Volume 36, Issue 3, 2017, Pages 87-99]
M
-
Maghsoudi, E.
Evaluation of Temperature Distribution in Thermal Forming Process of Steel Plate by Oxy-gas Source Line Heating [Volume 36, Issue 1, 2017, Pages 53-70]
-
Maghsoudi, E.
Investigation of Hot Deformation Behavior of 321 Stainless Steel using Hot Compression Test and Modeling with Constitutive Equations [Volume 36, Issue 3, 2017, Pages 63-72]
-
Mahmoodi, M.
Effect of Hydroxyapatite Nanoparticles on Properties of Keratin/Poly Caprolactone Nanofibers for Tissue Engineering [Volume 36, Issue 4, 2018, Pages 45-57]
-
Maleki, A.
Improving the Surface Properties of Gray Cast Iron through In-Situ Alloying [Volume 36, Issue 3, 2017, Pages 1-10]
-
Meratian, M.
Investigating the Effect of Equal Channel Angular Extrusion on Microstructure and Mechanical Properties of the 60-40 Two-phase Brass Alloy [Volume 36, Issue 4, 2018, Pages 21-29]
-
Milani, M.
Effect of Ion Concentration on Viscosity of Doped Alumina Suspensions for Electrophoretic Deposition [Volume 36, Issue 2, 2017, Pages 119-130]
-
Milani, M.
Optimization of Slip Casting Parameters of Alumina Yttria Nanocomposite Powder for Obtaining Transparent Yttrium Aluminum Garnet Ceramics [Volume 36, Issue 3, 2017, Pages 51-62]
-
Mirhaj, M.
Effect of Hydroxyapatite Nanoparticles on Properties of Keratin/Poly Caprolactone Nanofibers for Tissue Engineering [Volume 36, Issue 4, 2018, Pages 45-57]
-
Mirkazemi, S. M.
Evaluating Phase Constituents, Magnetic Properties and Microstructure of Nickel Ferrite Nanoparticles Synthesized by Sol-Gel Auto-Combustion [Volume 36, Issue 2, 2017, Pages 47-54]
-
Mirkazemi, S. M.
Effect of Ion Concentration on Viscosity of Doped Alumina Suspensions for Electrophoretic Deposition [Volume 36, Issue 2, 2017, Pages 119-130]
-
Mohammadi, A. H.
Preparation of Lithium Ion Conductor Glass-Ceramic with High Conductivity for Producing Lithium-Air and all-Solid-State Lithium-Ion Batteries [Volume 36, Issue 1, 2017, Pages 37-52]
-
Mohammad Javadi, M.
Effect of Standoff Distance and Explosive Material Thickness on Properties of Explosively Welded Copper and 304 Stainless Steel [Volume 36, Issue 3, 2017, Pages 35-50]
-
MohammadPoor, P.
Thermodynamic Description of the TiâO System using the Ionic Liquid Model for the Liquid Phase [Volume 36, Issue 3, 2017, Pages 73-85]
-
Mohammadzadeh, R.
Kinetics of Austenite Layer Growth on the Surface of Fe-23Cr-2.4Mo Ferritic Stainless Steel During Solution Nitriding [Volume 36, Issue 2, 2017, Pages 55-66]
-
Mohtadi Bonab, M.
Friction Stir Welding of Super Duplex Stainless Steel of UNS S32750, Its Microstructure Evaluation, Mechanical and Corrosion Properties [Volume 36, Issue 1, 2017, Pages 97-120]
-
Mostaan, H.
The Effect of Filler Metal on Properties of AISI 4130 to AISI 316L Dissimilar Joint [Volume 36, Issue 2, 2017, Pages 33-46]
-
Mottaghi, M.
The Wear Behavior of WC-Co and WC-FeAl-B Composites at Temperatures of Ambient and 300 ÌC [Volume 36, Issue 1, 2017, Pages 1-12]
-
Mousavi, S. E.
Investigating the Effect of Equal Channel Angular Extrusion on Microstructure and Mechanical Properties of the 60-40 Two-phase Brass Alloy [Volume 36, Issue 4, 2018, Pages 21-29]
-
Mousavi Ghahfarokhi, S. E.
The Effect of Annealing Temperature on the Structural, Magnetic and Dielectric Properties of PbFe11.8Ni0.2O19 Nanoparticles [Volume 36, Issue 2, 2017, Pages 67-80]
-
Movahedi, B.
Optimization of Slip Casting Parameters of Alumina Yttria Nanocomposite Powder for Obtaining Transparent Yttrium Aluminum Garnet Ceramics [Volume 36, Issue 3, 2017, Pages 51-62]
N
-
Nilforushan, M. R.
The Effect of Nano-magnesia Addition on the Properties of Magnesite-hercynite Refractory Bricks Made with the Use of Convertor Mud [Volume 36, Issue 2, 2017, Pages 95-106]
-
Niroumand, B.
Optimization of Surface Mechanical Properties and Characterization of AZ31B/CNT Nano-composite through Friction Stir Processing (FSP) using Response Surface Methodology (RSM) Design of Experiment [Volume 36, Issue 2, 2017, Pages 15-32]
-
Niroumand, B.
Optimization of Surface Mechanical Properties and Characterization of AZ31B/CNT Nano-composite through Friction Stir Processing (FSP) using Response Surface Methodology (RSM) Design of Experiment [Volume 36, Issue 2, 2017, Pages 15-32]
-
Niroumand, B.
Improving the Surface Properties of Gray Cast Iron through In-Situ Alloying [Volume 36, Issue 3, 2017, Pages 1-10]
-
Norouzbeigi, R.
Evaluation of the Effect of Polyethylene Glycol Addition on the Wetting Properties of ZnO Superhydrophobic Surfaces Prepared via Chemical Bath Deposition Method [Volume 36, Issue 4, 2018, Pages 69-88]
O
-
Otroj, S.
The Effect of Nano-magnesia Addition on the Properties of Magnesite-hercynite Refractory Bricks Made with the Use of Convertor Mud [Volume 36, Issue 2, 2017, Pages 95-106]
P
-
Pakmanesh, M. R.
Analysis of Pulsed Laser Welding Parameters Effect on Weld Geometry of 316L Stainless Steel using DOE [Volume 36, Issue 4, 2018, Pages 105-116]
-
Poorkabirian, M.
The Effect of Filler Metal on Properties of AISI 4130 to AISI 316L Dissimilar Joint [Volume 36, Issue 2, 2017, Pages 33-46]
-
Prabhakaran, Molamma
Poly (hydroxybutyrate co hydroxyvalerate) Nanofibrous Scaffold Containing HydroxyapatiteBredigite Nanoparticles: Characterization and Biological Evaluation [Volume 36, Issue 3, 2017, Pages 87-99]
R
-
Raeissi, K.
Electroplating of Ni-Mo Coating on Stainless Steel for Application in Proton Exchange Membrane Fuel Cell Bipolar Plate [Volume 36, Issue 4, 2018, Pages 1-20]
-
Raeissi, K.
Electroplating of Ni-Mo Coating on Stainless Steel for Application in Proton Exchange Membrane Fuel Cell Bipolar Plate [Volume 36, Issue 4, 2018, Pages 1-20]
-
Rafiei, M.
The Effect of Filler Metal on Properties of AISI 4130 to AISI 316L Dissimilar Joint [Volume 36, Issue 2, 2017, Pages 33-46]
-
Rajabi, M.
Effect of Milling Time and 25Ce-75Ni Addition on Hydrogen Desorption Properties of Magnesium Hydride-based Composite Produced by Mechanical Alloying [Volume 36, Issue 4, 2018, Pages 31-43]
-
Ramakrishna, Seeram
Poly (hydroxybutyrate co hydroxyvalerate) Nanofibrous Scaffold Containing HydroxyapatiteBredigite Nanoparticles: Characterization and Biological Evaluation [Volume 36, Issue 3, 2017, Pages 87-99]
-
Rashtchi, H.
Electroplating of Ni-Mo Coating on Stainless Steel for Application in Proton Exchange Membrane Fuel Cell Bipolar Plate [Volume 36, Issue 4, 2018, Pages 1-20]
-
Razavi, S. A.
Analysis of the Aging Process and Fatigue Behavior of 17-4 PH Stainless Steel [Volume 36, Issue 2, 2017, Pages 81-93]
-
Razmjou, A.
Improvement of Polypropylene Biological Interactions by using Superhydrophobic Surface Modification [Volume 36, Issue 4, 2018, Pages 127-140]
-
Rezaeian, A.
Investigating the Effect of Equal Channel Angular Extrusion on Microstructure and Mechanical Properties of the 60-40 Two-phase Brass Alloy [Volume 36, Issue 4, 2018, Pages 21-29]
-
Rizaneh, S.
The Function of Al2O3-TiB2/Fe Composite Reinforcements in Aluminum Matrix Composites [Volume 36, Issue 1, 2017, Pages 23-35]
-
Rostamnejadi, A.
Static and Dynamic Magnetic Properties of La0.8Sr0.2MnO3 Nanoparticles [Volume 36, Issue 3, 2017, Pages 23-34]
S
-
Sabooni, S.
Synthesis and Characterization of FeAl/Al2O3 Nanocomposite Coating on Carbon Steel Plate by High Energy Mechanical Alloying [Volume 36, Issue 2, 2017, Pages 107-117]
-
Sadrnezhaad, S. K.
Structural and Physical Properties of TiO2/CNT Nanocomposite Thin Films Synthesized by Sol-Gel Dip Coating Method for Using in Dye-Sensitized Solar Cell [Volume 36, Issue 3, 2017, Pages 101-109]
-
Safi, S.
Evaluation of Synthesizing Al2O3 Nano Particles in Copper Matrix by Mechanical Alloying of Cu-1% Al and Copper Oxide [Volume 36, Issue 1, 2017, Pages 71-85]
-
Saghafian, H.
The Microstructural Study of in Situ Al Alloy 319 Based Composite Reinforced by Iron-Based Intermetallic Produced by Stir Casting Process [Volume 36, Issue 3, 2017, Pages 111-126]
-
Seyyed Afghahi, S. S.
Influence of Fe/Ba Molar Ratio on Phase Composition, Synthesis Temperature, Microstructure and Magnetic Properties of Barium Hexaferrite [Volume 36, Issue 1, 2017, Pages 13-22]
-
Shahjooyi, T.
Evaluating Phase Constituents, Magnetic Properties and Microstructure of Nickel Ferrite Nanoparticles Synthesized by Sol-Gel Auto-Combustion [Volume 36, Issue 2, 2017, Pages 47-54]
-
Shamanian, M.
Friction Stir Welding of Super Duplex Stainless Steel of UNS S32750, Its Microstructure Evaluation, Mechanical and Corrosion Properties [Volume 36, Issue 1, 2017, Pages 97-120]
-
Shamanian, M.
Optimization of Surface Mechanical Properties and Characterization of AZ31B/CNT Nano-composite through Friction Stir Processing (FSP) using Response Surface Methodology (RSM) Design of Experiment [Volume 36, Issue 2, 2017, Pages 15-32]
-
Shamanian, M.
Poly (hydroxybutyrate co hydroxyvalerate) Nanofibrous Scaffold Containing HydroxyapatiteBredigite Nanoparticles: Characterization and Biological Evaluation [Volume 36, Issue 3, 2017, Pages 87-99]
-
Shamanian, M.
Electroplating of Ni-Mo Coating on Stainless Steel for Application in Proton Exchange Membrane Fuel Cell Bipolar Plate [Volume 36, Issue 4, 2018, Pages 1-20]
-
Shamanian, M.
Analysis of Pulsed Laser Welding Parameters Effect on Weld Geometry of 316L Stainless Steel using DOE [Volume 36, Issue 4, 2018, Pages 105-116]
-
Shirani, E.
Improvement of Polypropylene Biological Interactions by using Superhydrophobic Surface Modification [Volume 36, Issue 4, 2018, Pages 127-140]
-
Shybani, A.
Effect of Hydroxyapatite Nanoparticles on Properties of Keratin/Poly Caprolactone Nanofibers for Tissue Engineering [Volume 36, Issue 4, 2018, Pages 45-57]
-
Soltani, M.
Optimization of Surface Mechanical Properties and Characterization of AZ31B/CNT Nano-composite through Friction Stir Processing (FSP) using Response Surface Methodology (RSM) Design of Experiment [Volume 36, Issue 2, 2017, Pages 15-32]
-
Soltanipour, A.
Investigation of Hot Deformation Behavior of 321 Stainless Steel using Hot Compression Test and Modeling with Constitutive Equations [Volume 36, Issue 3, 2017, Pages 63-72]
-
Szpunar, J.
Friction Stir Welding of Super Duplex Stainless Steel of UNS S32750, Its Microstructure Evaluation, Mechanical and Corrosion Properties [Volume 36, Issue 1, 2017, Pages 97-120]
T
-
Tajalli, M.
Study of Structural, Morphological and Optical Properties of Magnesium Hydroxide Nanoplates Synthesized by Precipitation Route [Volume 36, Issue 4, 2018, Pages 59-67]
-
Tavoosi, M.
The Function of Al2O3-TiB2/Fe Composite Reinforcements in Aluminum Matrix Composites [Volume 36, Issue 1, 2017, Pages 23-35]
V
-
Velayi, E.
Evaluation of the Effect of Polyethylene Glycol Addition on the Wetting Properties of ZnO Superhydrophobic Surfaces Prepared via Chemical Bath Deposition Method [Volume 36, Issue 4, 2018, Pages 69-88]
Z
-
Zahraee, S. M.
Effect of Ion Concentration on Viscosity of Doped Alumina Suspensions for Electrophoretic Deposition [Volume 36, Issue 2, 2017, Pages 119-130]
-
Zakeri, A.
Electrowinning of Nickel from Dilute Sulfate Solution [Volume 36, Issue 4, 2018, Pages 89-103]
-
Zakeri, A. R.
Kinetics of Copper Cementation by Aluminum Powder from Sulfate Solution under Ball Milling Conditions [Volume 36, Issue 1, 2017, Pages 87-96]
Your query does not match with any item