Journal of Advanced Materials in Engineering

Keywords = microstructure

Comprehensive Analysis of Heat Input and Filler Metal Effects on Microstructure and Mechanical Properties in Gas Tungsten Arc Welding of Cobalt-Based FSX-414 Superalloy

Articles in Press, Accepted Manuscript, Available Online from 01 October 2025

Mohammad Reza Sheikhmohseni; Seyed Mohammad Ali Boutorabi; Mohammad Amin Amjadi; Rouholah Ashiri

Studying the Effect of Reduced Graphene Oxide on the Microstructure and Biomechanical Properties of Akermanite Ceramics

Articles in Press, Accepted Manuscript, Available Online from 01 October 2025

Farzad Malmir; Mahdi Kalantar; Mojdeh Azizi; Masoud Moshrafifar

Investigating the ZrC Effect on the Oxidation Resistance of ZrB2-SiC Composite

Volume 45, Issue 1, March 2026, Pages 49-62

10.47176/jame.45.1.1133

Mohsen Ghasilzade Jarvand; Zohre Balak

Investigating the Effect of Tempering Temperature on the Microstructure, Hardness and Burst Pressure of 34CrMo4 Steel

Volume 44, Issue 3, 2025, Pages 41-60

10.47176/jame.44.3.1078

Ali Zareei; Mohammad Mahdi Piran; Masoud Atapoor

Study on Thermomechanical Behavior and Extraction of Arrhenius Model and Processing Map for Al-7.5Mg Sheets

Volume 44, Issue 3, 2025, Pages 115-134

10.47176/jame.44.3.1105

Mohammad Hossein Bagheri; Javad Rasti; Hamid Reza Ghazvinloo

Microstructure and Hardness of Ti-6242 Alloy Fabricated by Electron Beam Powder Bed Fusion and Laser Powder Bed Fusion Methods

Volume 44, Issue 2, 2025, Pages 1-17

10.47176/jame.44.2.1090

Amir Hossein Emami Ghalehghasemi; Abolfazl Azadi; Behzad Niroumand; Manuela Galati; Abdollah Saboori

Investigating the Properties and Behavior of Ag-Cu-Ti-Sn-%5.1 Zr Filler Metal in Dissimilar Bonding of Alumina to Copper

Volume 44, Issue 1, 2025, Pages 15-30

10.47176/jame.44.1.1075

M. Taheri; Gh. Azimi Roeen; A. Bahrami

An investigation on Dimensions, Mechanical Properties, and Microstructure of the Carbon Steel Wall using MIG/MAG Welding as a WAAM Process

Volume 43, Issue 4, 2024, Pages 37-49

10.47176/jame.43.4.1070

S.M.A. Tabatabaei Majd; J. Rasti; H.R. Ghazvinloo

Effect of Milling Time on the Microstructure and Mechanical Properties of HfB2-ZrB2-TiB2 Sintered via SPS

Volume 43, Issue 4, 2024, Pages 51-68

10.47176/jame.43.4.1085

A. Masdar; Z. Balak

The Effect of Zinc Oxide Nanoparticles on the Microstructure and Dielectric Properties of Barium Titanate Ceramics

Volume 43, Issue 2, 2024, Pages 55-67

10.47176/jame.43.2.1068

F. Mahmoudi Cholicheh; H. Ahmadimoghadam; H. Sharifi

MICROSTRUCTURE, HARDNESS AND SURFACE ROUGHNESS CHARACTERIZATION OF EBM FABRICATED Ti-6Al-4V SAMPLES

Volume 40, Issue 4, March 2022, Pages 51-67

10.47176/jame.40.4.03322

A. Mohammadi; B. Niroumand; A. Saboori

INVESTIGATION OF THE EFFECT OF THERMOMECHANICAL PROCESSING ON MICROSTRUCTURE AND CORROSION RESISTANCE OF 321 AUSTENITIC STAINLESS STEEL

Volume 40, Issue 2, September 2021, Pages 65-82

10.47176/jame.40.2.22971

M. Salehi; M. Eskandari; M. Yeganeh

INVESTIGATING THE EFFECT OF WELDING PASTE CONTAINING GRAPHENE NANOSHEETS ON BONDING PROPERTIES OF WELDED AISI 304 STAINLESS STEEL PRODUCED BY FLUX-CORED ARC WELDING

Volume 40, Issue 1, May 2021, Pages 83-98

10.47176/jame.40.1.23031

M. Khosravi; M. Mansouri; A. Gholami; Y. Yaghoubinezhad

EFFECT OF MISH METAL TYPE ON THE MICROSTRUCTURE AND ABSORPTION/DESORPTION CHARACTERISTICS OF MMNI5 HYDROGEN STORAGE ALLOY

Volume 40, Issue 1, May 2021, Pages 99-112

10.47176/jame.40.1.17372

M. Judaki; M. Seifollahi; S. M. Abbasi; S. M. Ghazi Mir Saeed

Morphological and Thermal Flux Analysis in as-Cast Al Alloy after Swarf Addition

Volume 39, Issue 4, February 2021, Pages 95-113

10.47176/jame.39.4.20511

H. Hadian; M. Haddad Sabzevar; M. Mazinani

Investigation of the Effect of Homogenization Treatment on Distribution of Alloying Elements, Microstructure and Hardness of Co-Al-W-Ti-Ta-Base Superalloy

Volume 39, Issue 2, August 2020, Pages 103-119

10.47176/jame.39.2.21621

M. Etminan; M. Morakabati; S. M. Qazi mir saeid

Formation and Evaluation of Oxidation Behavior of Zirconia- Aluminide Coating on Nickel- Based Alloy

Volume 39, Issue 1, May 2020, Pages 1-12

10.47176/jame.39.1.3531

F. Shahriari Nogorani; M. afari; M. A. Taghipoor; A. Atefi

TIG Surface Alloying of Ti-6Al-4V with Nitrogen and Chromium for Improved Tribological Properties

Volume 38, Issue 4, January 2020, Pages 65-74

10.47176/jame.38.4.13811

G. R. Faghani; A. R. Khajeh-Amiri

Grain Growth Kinetics of Magnesium Alloys Containing Aluminum and Rare-Earth Element Gadolinium

Volume 37, Issue 4, March 2019, Pages 1-11

10.29252/jame.37.4.1

B. Pourbahari; H. Mirzadeh; M. Emamy

The Effect of Boron and Zirconium on the Microstructure and Mechanical Properties of Cast Fe3Al-Based Alloys

Volume 37, Issue 4, March 2019, Pages 43-57

10.29252/jame.37.4.43

M. Rajabi; M. Shahmiri; M. Ghanbari

Investigating the Effect of Equal Channel Angular Extrusion on Microstructure and Mechanical Properties of the 60-40 Two-phase Brass Alloy

Volume 36, Issue 4, March 2018, Pages 21-29

10.29252/jame.36.4.21

S. E. Mousavi; M. Meratian; A. Rezaeian

Improving the Surface Properties of Gray Cast Iron through In-Situ Alloying

Volume 36, Issue 3, November 2017, Pages 1-10

10.29252/jame.36.3.1

M. Khoobroo; A. Maleki; B. Niroumand

Friction Stir Welding of Super Duplex Stainless Steel of UNS S32750, Its Microstructure Evaluation, Mechanical and Corrosion Properties

Volume 36, Issue 1, June 2017, Pages 97-120

10.18869/acadpub.jame.36.1.97

M. Ahl Sarmadi; M. Shamanian; H. Edris; M. Atapoor; A. Behjat; M. Mohtadi Bonab; J. Szpunar

Investigating the Effect of Co-Cr-Sn Ions Substitution on Microstructure and Magnetic Properties of M-type Barium Hexaferrites

Volume 35, Issue 3, December 2016, Pages 69-80

10.18869/acadpub.jame.35.3.69

S. S. Seyyed Afghahi; M. Jafarian; M. Salehi

Effect of Structure and Surface Roughness on Wetting Angle of a Hypoeutectic Cast Iron

Volume 35, Issue 2, September 2016, Pages 31-45

10.18869/acadpub.jame.35.2.31

S. Riahi; B. Niroumand; B. Niroumand

Journal of Advanced Materials in Engineering

Journal Archive

Volume 45 (2026)

Volume 44 (2025)

Volume 43 (2024)

Volume 42 (2023)

Volume 41 (2022)

Volume 40 (2021)

Volume 39 (2020)

Volume 38 (2019)

Volume 37 (2018)

Volume 36 (2017)

Volume 35 (2016)

Volume 34 (2015)

Volume 33 (2014)

Volume 32 (2013)

Volume 31 (2012)

Volume 30 (2011)

Volume 29 (2010)

Volume 28 (2009)

Volume 27 (2008)

Volume 26 (2007)

Volume 25 (2006)

Volume 24 (2005)

Volume 23 (2004)

Volume 22 (2003)

Volume 21 (2002)

Volume 20 (2001)

Volume 19 (2000)

Volume 18 (1999)

Volume 17 (1998)

Volume 16 (1997)

Volume 15 (1994)

Volume 14 (1994)

Volume 13 (1993)

Volume 12 (1993)

Volume 11 (1992)

Volume 9 (1991)

Volume 10 (1991)

Volume 8 (1990)

Volume 7 (1989)

Volume 6 (1988)

Volume 5 (1987)