Keyword Index

A

  • Ageing time Fabrication of Yttria Nanopowder by Precipitation Method Using Micro Meter Powder [Volume 34, Issue 3, 2015, Pages 97-106]
  • Agglomeration Synthesis of MoSi2-TiB2 Nanocomposite by Mechanical Alloying through Two Methods and Comparison of Their Properties for Use in Thermal Spraying Process [Volume 34, Issue 2, 2015, Pages 1-17]
  • AISI 316 austenitic stainless steel Investigation of the Mechanical Properties of AISI 316 Austenitic Stainless Steel and St 37 Low Carbon Steel Dissimilar Joint by Friction Stir Welding [Volume 34, Issue 2, 2015, Pages 89-101]
  • Al2O3-based composite Effect of Al2O3 Addition as Diluent on Combustion Synthesis of Al2O3-ZrB2 Composite [Volume 34, Issue 4, 2015, Pages 1-8]
  • Al413-SiCnp Effect of Discontinuous Ultrasonic Treatment on Mechanical Properties and Microstructure of Cast Al413-SiCnp Nanocomposites [Volume 34, Issue 1, 2015, Pages 87-103]
  • Al5083 Microstructure and Corrosion Behavior Investigation of Al5083-H321 GMAW Weldment in Sea Water [Volume 34, Issue 3, 2015, Pages 107-115]
  • Al-Mg-Si alloys Effect of Al-5Ti-B Inoculant Addition on the Graded Microstructure of Centrifugally Cast Al-13.8 wt.% Mg2Si Composite [Volume 34, Issue 2, 2015, Pages 49-59]
  • AlN whiskers The Effects of NH4Cl and Particle Size of Al Powder in AlN Whiskers Synthesis by Direct Nitridation [Volume 34, Issue 1, 2015, Pages 55-66]
  • Alumina Fabrication of Mullite-Alumina-SiC Composites by In-Situ Reaction during Carbothermal Reduction of Inorganic Materials [Volume 34, Issue 3, 2015, Pages 1-11]
  • Alumina Study of Nano-Titania Addition on Mechanical Strength of Mullite-Bonded Alumina-Silicon Carbide Nano-Composites [Volume 34, Issue 3, 2015, Pages 49-58]
  • Aluminum injection Effect of Aluminium Injection into the Crystalizator on Type, Composition and Activity of Inclusions in Low Carbon Steel [Volume 34, Issue 1, 2015, Pages 9-23]
  • Aluminum-Iron alloy Effect of Grain Size Reduction by Sodium Molybdate on Mechanical Properties of Al-0.7Fe Alloy [Volume 34, Issue 3, 2015, Pages 39-48]
  • Aluminum particel size The Effects of NH4Cl and Particle Size of Al Powder in AlN Whiskers Synthesis by Direct Nitridation [Volume 34, Issue 1, 2015, Pages 55-66]
  • Andalusite Fabrication of Mullite-Alumina-SiC Composites by In-Situ Reaction during Carbothermal Reduction of Inorganic Materials [Volume 34, Issue 3, 2015, Pages 1-11]
  • Annealing effect Effect of Isothermal Ageing on Structural and Magnetic Properties of Ni47Mn40Sn13 Ferromagnetic Shape Memory Alloy [Volume 34, Issue 3, 2015, Pages 29-38]
  • Antibacterial Properties Preparation, Characterization and Comparative Study of Antibacterial Properties of Ag-TiO2 and ZnO-TiO2 Nanoparticles [Volume 34, Issue 4, 2015, Pages 43-52]

B

  • Bioelectric signal Preparation of Fabric Sensor for Heart Signal Acquisition Using Printing and Electroless Plating of Copper on Polyester Fabric [Volume 34, Issue 2, 2015, Pages 115-124]
  • Bone marrow stem cells Fabrication and Characterization of Novel Willemite Nanobioceramic for Bone Defect Repair [Volume 34, Issue 1, 2015, Pages 79-86]
  • Broth Effets of Silver Salt Concentrations on Green Synthesis of Silver Nanoparticles Using the Plant Nigella Saliva [Volume 34, Issue 4, 2015, Pages 33-41]

C

  • Carbamide Effect of Al2O3 Particles on Mechanical Properties of Al-(0-40%)Al2O3 Composite Foams Produced by Low Energy Mechanical Alloying [Volume 34, Issue 1, 2015, Pages 1-8]
  • Carbothermal Reduction Fabrication of Mullite-Alumina-SiC Composites by In-Situ Reaction during Carbothermal Reduction of Inorganic Materials [Volume 34, Issue 3, 2015, Pages 1-11]
  • Cast Nanocomposite Effect of Discontinuous Ultrasonic Treatment on Mechanical Properties and Microstructure of Cast Al413-SiCnp Nanocomposites [Volume 34, Issue 1, 2015, Pages 87-103]
  • CdS Density Functional Theory Calculation on Improving the Photocatalytic Properties of Zinc Oxide and Cadmium Sulfide by Hybridization with Metal-Organic Framework [Volume 34, Issue 4, 2015, Pages 107-113]
  • Cell toxicity Fabrication and Characterization of Novel Willemite Nanobioceramic for Bone Defect Repair [Volume 34, Issue 1, 2015, Pages 79-86]
  • Centrifugal casting Effect of Al-5Ti-B Inoculant Addition on the Graded Microstructure of Centrifugally Cast Al-13.8 wt.% Mg2Si Composite [Volume 34, Issue 2, 2015, Pages 49-59]
  • Chloride solution Purification of Gold from Chloride Leach Liquor of Copper Anode Slime by Octanol-Kerosene Organic Extractant [Volume 34, Issue 2, 2015, Pages 71-78]
  • Cobalt Ferrite Effect of PVP Additive on Properties of Cobalt Ferrite Nanoparticles Prepared by Hydrothermal Method [Volume 34, Issue 1, 2015, Pages 67-77]
  • Cobalt-Ferrite Synthesizing CoFe2O4 by Glass-Ceramic Method and Characterizing its Magnetic Properties in Na2O-Fe2O3-CoO-B2O3-SiO2 System [Volume 34, Issue 2, 2015, Pages 61-69]
  • Co-deposition Influence of Gr and MoS2 Particles on High Temperature Tribological Properties of Ni-SiC Composite Coating [Volume 34, Issue 1, 2015, Pages 105-121]
  • Combustion synthesis Effect of Al2O3 Addition as Diluent on Combustion Synthesis of Al2O3-ZrB2 Composite [Volume 34, Issue 4, 2015, Pages 1-8]
  • Combustion synthesis Effect of Excess Al in TiO2-Al Powder Mixture and Susceptor Material on Microwave Synthesis of TiAl/Al2O3 Composite [Volume 34, Issue 4, 2015, Pages 53-60]
  • Concentration Fabrication of Yttria Nanopowder by Precipitation Method Using Micro Meter Powder [Volume 34, Issue 3, 2015, Pages 97-106]
  • Concentration Effets of Silver Salt Concentrations on Green Synthesis of Silver Nanoparticles Using the Plant Nigella Saliva [Volume 34, Issue 4, 2015, Pages 33-41]
  • Copper anode slime Purification of Gold from Chloride Leach Liquor of Copper Anode Slime by Octanol-Kerosene Organic Extractant [Volume 34, Issue 2, 2015, Pages 71-78]
  • Copper electroless Preparation of Fabric Sensor for Heart Signal Acquisition Using Printing and Electroless Plating of Copper on Polyester Fabric [Volume 34, Issue 2, 2015, Pages 115-124]
  • Corrosion behavior Microstructure and Corrosion Behavior Investigation of Al5083-H321 GMAW Weldment in Sea Water [Volume 34, Issue 3, 2015, Pages 107-115]
  • Crystallization Investigation of Crystallization Kinetics of Fe36Cr12Mo10 and α-Fe Phases in Devitrification of Fe51Cr18Mo7B16C4Nb4 Amorphous Alloy [Volume 34, Issue 1, 2015, Pages 45-53]
  • Crystallizator Effect of Aluminium Injection into the Crystalizator on Type, Composition and Activity of Inclusions in Low Carbon Steel [Volume 34, Issue 1, 2015, Pages 9-23]

D

  • Deoxidation Effect of Aluminium Injection into the Crystalizator on Type, Composition and Activity of Inclusions in Low Carbon Steel [Volume 34, Issue 1, 2015, Pages 9-23]
  • Devitrification Investigation of Crystallization Kinetics of Fe36Cr12Mo10 and α-Fe Phases in Devitrification of Fe51Cr18Mo7B16C4Nb4 Amorphous Alloy [Volume 34, Issue 1, 2015, Pages 45-53]
  • DFT Density Functional Theory Calculation on Improving the Photocatalytic Properties of Zinc Oxide and Cadmium Sulfide by Hybridization with Metal-Organic Framework [Volume 34, Issue 4, 2015, Pages 107-113]
  • Diluent Effect of Al2O3 Addition as Diluent on Combustion Synthesis of Al2O3-ZrB2 Composite [Volume 34, Issue 4, 2015, Pages 1-8]
  • Direct nitridation The Effects of NH4Cl and Particle Size of Al Powder in AlN Whiskers Synthesis by Direct Nitridation [Volume 34, Issue 1, 2015, Pages 55-66]
  • Discontinuous ultrasonic treatment Effect of Discontinuous Ultrasonic Treatment on Mechanical Properties and Microstructure of Cast Al413-SiCnp Nanocomposites [Volume 34, Issue 1, 2015, Pages 87-103]
  • Dissimilar joint Investigation of the Mechanical Properties of AISI 316 Austenitic Stainless Steel and St 37 Low Carbon Steel Dissimilar Joint by Friction Stir Welding [Volume 34, Issue 2, 2015, Pages 89-101]
  • Distribution of reinforcing particles Effect of Discontinuous Ultrasonic Treatment on Mechanical Properties and Microstructure of Cast Al413-SiCnp Nanocomposites [Volume 34, Issue 1, 2015, Pages 87-103]
  • Dye-sensitized Solar Cells Transparency Effect of Electrolyte on Light Back-Scattering in Dye-Sensitized Solar Cells [Volume 34, Issue 3, 2015, Pages 59-67]

E

  • Elastic modulus Simulation of Elastic Properties of Polymer- Clay Nanocomposite [Volume 34, Issue 3, 2015, Pages 69-86]
  • Electrolyte Transparency Effect of Electrolyte on Light Back-Scattering in Dye-Sensitized Solar Cells [Volume 34, Issue 3, 2015, Pages 59-67]
  • Electroplated coating Effect of Current Density on Microstructure of Mn-Cu Thin Films produced by Electroplating Coating Technique [Volume 34, Issue 1, 2015, Pages 25-33]
  • Equal Q& Influence of Parameters of Quenching and Partitioning Process on Microstructure and Fraction of Retained Austenite [Volume 34, Issue 2, 2015, Pages 79-87]

F

  • Ferromagnetic shape memory alloy Effect of Isothermal Ageing on Structural and Magnetic Properties of Ni47Mn40Sn13 Ferromagnetic Shape Memory Alloy [Volume 34, Issue 3, 2015, Pages 29-38]
  • Finite element model Simulation of Elastic Properties of Polymer- Clay Nanocomposite [Volume 34, Issue 3, 2015, Pages 69-86]
  • Finite element simulation Fabrication of Ultra-Fine Grained Plain Low Carbon Steel through Dynamic Strain Induced Transformation during Integrated Extrusion Equal Channel Angular Pressing [Volume 34, Issue 4, 2015, Pages 73-85]
  • Flexible electrode Preparation of Fabric Sensor for Heart Signal Acquisition Using Printing and Electroless Plating of Copper on Polyester Fabric [Volume 34, Issue 2, 2015, Pages 115-124]
  • Friction stir welding Investigation of the Mechanical Properties of AISI 316 Austenitic Stainless Steel and St 37 Low Carbon Steel Dissimilar Joint by Friction Stir Welding [Volume 34, Issue 2, 2015, Pages 89-101]
  • Functionally graded microstructure Effect of Al-5Ti-B Inoculant Addition on the Graded Microstructure of Centrifugally Cast Al-13.8 wt.% Mg2Si Composite [Volume 34, Issue 2, 2015, Pages 49-59]

G

  • Gas-metal arc welding Microstructure and Corrosion Behavior Investigation of Al5083-H321 GMAW Weldment in Sea Water [Volume 34, Issue 3, 2015, Pages 107-115]
  • Glass-ceramic Synthesizing CoFe2O4 by Glass-Ceramic Method and Characterizing its Magnetic Properties in Na2O-Fe2O3-CoO-B2O3-SiO2 System [Volume 34, Issue 2, 2015, Pages 61-69]
  • Gold Purification of Gold from Chloride Leach Liquor of Copper Anode Slime by Octanol-Kerosene Organic Extractant [Volume 34, Issue 2, 2015, Pages 71-78]
  • Grain size Effect of Grain Size on the Corrosion Behavior of 304L Stainless Steel [Volume 34, Issue 4, 2015, Pages 61-72]
  • Grain size reduction Effect of Grain Size Reduction by Sodium Molybdate on Mechanical Properties of Al-0.7Fe Alloy [Volume 34, Issue 3, 2015, Pages 39-48]
  • Green reduction Effets of Silver Salt Concentrations on Green Synthesis of Silver Nanoparticles Using the Plant Nigella Saliva [Volume 34, Issue 4, 2015, Pages 33-41]
  • Growth mechanism Investigation of Crystallization Kinetics of Fe36Cr12Mo10 and α-Fe Phases in Devitrification of Fe51Cr18Mo7B16C4Nb4 Amorphous Alloy [Volume 34, Issue 1, 2015, Pages 45-53]

H

  • Heat treatment Synthesizing CoFe2O4 by Glass-Ceramic Method and Characterizing its Magnetic Properties in Na2O-Fe2O3-CoO-B2O3-SiO2 System [Volume 34, Issue 2, 2015, Pages 61-69]
  • Hybrid structure Density Functional Theory Calculation on Improving the Photocatalytic Properties of Zinc Oxide and Cadmium Sulfide by Hybridization with Metal-Organic Framework [Volume 34, Issue 4, 2015, Pages 107-113]
  • Hydrogen adsorption Evaluation of Ability of Hydrogen Absorption in SAB-16/Pd Nanostructure Composite [Volume 34, Issue 3, 2015, Pages 13-27]

I

  • Inclusions Effect of Aluminium Injection into the Crystalizator on Type, Composition and Activity of Inclusions in Low Carbon Steel [Volume 34, Issue 1, 2015, Pages 9-23]
  • Inoculant Effect of Al-5Ti-B Inoculant Addition on the Graded Microstructure of Centrifugally Cast Al-13.8 wt.% Mg2Si Composite [Volume 34, Issue 2, 2015, Pages 49-59]
  • Isothermal annealing Characterization of Nanonanocrystalline Mg-6Al-1Zn-1Si Alloy Powder During Mechanical Alloying and Subsequent Annealing [Volume 34, Issue 2, 2015, Pages 103-113]

K

  • Kaolinite Fabrication of Mullite-Alumina-SiC Composites by In-Situ Reaction during Carbothermal Reduction of Inorganic Materials [Volume 34, Issue 3, 2015, Pages 1-11]

L

  • Light Back-scattering Transparency Effect of Electrolyte on Light Back-Scattering in Dye-Sensitized Solar Cells [Volume 34, Issue 3, 2015, Pages 59-67]
  • Local corrosion Effect of Grain Size on the Corrosion Behavior of 304L Stainless Steel [Volume 34, Issue 4, 2015, Pages 61-72]
  • Low energy milling Effect of Al2O3 Particles on Mechanical Properties of Al-(0-40%)Al2O3 Composite Foams Produced by Low Energy Mechanical Alloying [Volume 34, Issue 1, 2015, Pages 1-8]

M

  • Magnesium alloys Characterization of Nanonanocrystalline Mg-6Al-1Zn-1Si Alloy Powder During Mechanical Alloying and Subsequent Annealing [Volume 34, Issue 2, 2015, Pages 103-113]
  • Mecanical milling Effect of Al2O3 Addition as Diluent on Combustion Synthesis of Al2O3-ZrB2 Composite [Volume 34, Issue 4, 2015, Pages 1-8]
  • Mechanical strength Study of Nano-Titania Addition on Mechanical Strength of Mullite-Bonded Alumina-Silicon Carbide Nano-Composites [Volume 34, Issue 3, 2015, Pages 49-58]
  • Mesoporous SBA-16 Evaluation of Ability of Hydrogen Absorption in SAB-16/Pd Nanostructure Composite [Volume 34, Issue 3, 2015, Pages 13-27]
  • Metal-organic framework (MOF) Density Functional Theory Calculation on Improving the Photocatalytic Properties of Zinc Oxide and Cadmium Sulfide by Hybridization with Metal-Organic Framework [Volume 34, Issue 4, 2015, Pages 107-113]
  • Micro-nano structure Comparison of Super-Hydrophobicity and Corrosion Resistance of Micro-Nano Structured Nickel and Nickel- Cobalt Alloy Coatings on Copper Substrate [Volume 34, Issue 4, 2015, Pages 87-105]
  • Microwave heating Effect of Excess Al in TiO2-Al Powder Mixture and Susceptor Material on Microwave Synthesis of TiAl/Al2O3 Composite [Volume 34, Issue 4, 2015, Pages 53-60]
  • Microwave susceptor Effect of Excess Al in TiO2-Al Powder Mixture and Susceptor Material on Microwave Synthesis of TiAl/Al2O3 Composite [Volume 34, Issue 4, 2015, Pages 53-60]
  • Milling time Synthesis of Silicon Nitride by Mechanical Alloying and Heat Treatment [Volume 34, Issue 4, 2015, Pages 9-18]
  • Mn-Cu alloy Effect of Current Density on Microstructure of Mn-Cu Thin Films produced by Electroplating Coating Technique [Volume 34, Issue 1, 2015, Pages 25-33]
  • Mori-Tanaka model Simulation of Elastic Properties of Polymer- Clay Nanocomposite [Volume 34, Issue 3, 2015, Pages 69-86]
  • MoSi2 Synthesis of MoSi2-TiB2 Nanocomposite by Mechanical Alloying through Two Methods and Comparison of Their Properties for Use in Thermal Spraying Process [Volume 34, Issue 2, 2015, Pages 1-17]
  • Mullite Fabrication of Mullite-Alumina-SiC Composites by In-Situ Reaction during Carbothermal Reduction of Inorganic Materials [Volume 34, Issue 3, 2015, Pages 1-11]
  • Mullite Study of Nano-Titania Addition on Mechanical Strength of Mullite-Bonded Alumina-Silicon Carbide Nano-Composites [Volume 34, Issue 3, 2015, Pages 49-58]

N

  • Nanbioceramic Fabrication and Characterization of Novel Willemite Nanobioceramic for Bone Defect Repair [Volume 34, Issue 1, 2015, Pages 79-86]
  • Nanopowder Fabrication of Yttria Nanopowder by Precipitation Method Using Micro Meter Powder [Volume 34, Issue 3, 2015, Pages 97-106]
  • Nanopowder Synthesis of Silicon Nitride by Mechanical Alloying and Heat Treatment [Volume 34, Issue 4, 2015, Pages 9-18]
  • Nano-structured Synthesizing CoFe2O4 by Glass-Ceramic Method and Characterizing its Magnetic Properties in Na2O-Fe2O3-CoO-B2O3-SiO2 System [Volume 34, Issue 2, 2015, Pages 61-69]
  • Nano-titania Study of Nano-Titania Addition on Mechanical Strength of Mullite-Bonded Alumina-Silicon Carbide Nano-Composites [Volume 34, Issue 3, 2015, Pages 49-58]
  • NH4Cl The Effects of NH4Cl and Particle Size of Al Powder in AlN Whiskers Synthesis by Direct Nitridation [Volume 34, Issue 1, 2015, Pages 55-66]
  • Nickel Comparison of Super-Hydrophobicity and Corrosion Resistance of Micro-Nano Structured Nickel and Nickel- Cobalt Alloy Coatings on Copper Substrate [Volume 34, Issue 4, 2015, Pages 87-105]
  • Nickel ferrite Analysis of Structural and Magnetic Characteristics of Nickel Ferrite Nanoparticles Prepared by Hydrothermal Method [Volume 34, Issue 1, 2015, Pages 35-43]
  • Nigella sativa Effets of Silver Salt Concentrations on Green Synthesis of Silver Nanoparticles Using the Plant Nigella Saliva [Volume 34, Issue 4, 2015, Pages 33-41]
  • Ni-SiC composite coating Influence of Gr and MoS2 Particles on High Temperature Tribological Properties of Ni-SiC Composite Coating [Volume 34, Issue 1, 2015, Pages 105-121]
  • Nitration Synthesis of Silicon Nitride by Mechanical Alloying and Heat Treatment [Volume 34, Issue 4, 2015, Pages 9-18]

O

  • Octanol Purification of Gold from Chloride Leach Liquor of Copper Anode Slime by Octanol-Kerosene Organic Extractant [Volume 34, Issue 2, 2015, Pages 71-78]

P

  • PEG Analysis of Structural and Magnetic Characteristics of Nickel Ferrite Nanoparticles Prepared by Hydrothermal Method [Volume 34, Issue 1, 2015, Pages 35-43]
  • Plasma Electrolytic Oxidation/Electrophoretic Deposition (PEO/EPD) method Investigation of Photocatalytic Properties of NiO/TiO2 Layers Grown via PEO/EPD Method [Volume 34, Issue 3, 2015, Pages 87-95]
  • Plladium Evaluation of Ability of Hydrogen Absorption in SAB-16/Pd Nanostructure Composite [Volume 34, Issue 3, 2015, Pages 13-27]
  • Polymer- clay nanocomposite Simulation of Elastic Properties of Polymer- Clay Nanocomposite [Volume 34, Issue 3, 2015, Pages 69-86]
  • Porosity Effect of Aluminium Injection into the Crystalizator on Type, Composition and Activity of Inclusions in Low Carbon Steel [Volume 34, Issue 1, 2015, Pages 9-23]
  • Precipitation Fabrication of Yttria Nanopowder by Precipitation Method Using Micro Meter Powder [Volume 34, Issue 3, 2015, Pages 97-106]
  • PVP additive Effect of PVP Additive on Properties of Cobalt Ferrite Nanoparticles Prepared by Hydrothermal Method [Volume 34, Issue 1, 2015, Pages 67-77]

R

  • Reflection loss Effect of Mg, Co and Ti Cations on Magnetic and Microwave Properties of SrFe12O19 Nanoparticles [Volume 34, Issue 4, 2015, Pages 19-31]

S

  • Screen printing Preparation of Fabric Sensor for Heart Signal Acquisition Using Printing and Electroless Plating of Copper on Polyester Fabric [Volume 34, Issue 2, 2015, Pages 115-124]
  • Sea water Microstructure and Corrosion Behavior Investigation of Al5083-H321 GMAW Weldment in Sea Water [Volume 34, Issue 3, 2015, Pages 107-115]
  • Severe plastic deformation Fabrication of Ultra-Fine Grained Plain Low Carbon Steel through Dynamic Strain Induced Transformation during Integrated Extrusion Equal Channel Angular Pressing [Volume 34, Issue 4, 2015, Pages 73-85]
  • SiC Fabrication of Mullite-Alumina-SiC Composites by In-Situ Reaction during Carbothermal Reduction of Inorganic Materials [Volume 34, Issue 3, 2015, Pages 1-11]
  • Silicon carbide Study of Nano-Titania Addition on Mechanical Strength of Mullite-Bonded Alumina-Silicon Carbide Nano-Composites [Volume 34, Issue 3, 2015, Pages 49-58]
  • Silicon nitride Synthesis of Silicon Nitride by Mechanical Alloying and Heat Treatment [Volume 34, Issue 4, 2015, Pages 9-18]
  • Silver Preparation, Characterization and Comparative Study of Antibacterial Properties of Ag-TiO2 and ZnO-TiO2 Nanoparticles [Volume 34, Issue 4, 2015, Pages 43-52]
  • Sodium molybdate Effect of Grain Size Reduction by Sodium Molybdate on Mechanical Properties of Al-0.7Fe Alloy [Volume 34, Issue 3, 2015, Pages 39-48]
  • Sol-gel Preparation, Characterization and Comparative Study of Antibacterial Properties of Ag-TiO2 and ZnO-TiO2 Nanoparticles [Volume 34, Issue 4, 2015, Pages 43-52]
  • Sol – Gelroute Evaluation of Ability of Hydrogen Absorption in SAB-16/Pd Nanostructure Composite [Volume 34, Issue 3, 2015, Pages 13-27]
  • Solid lubricant particles Influence of Gr and MoS2 Particles on High Temperature Tribological Properties of Ni-SiC Composite Coating [Volume 34, Issue 1, 2015, Pages 105-121]
  • Solid Solution Investigating the Effect of Microstructure on Oxidation Behavior of Ti47Al48Mn5 Alloy Synthesized by Mechanical Alloying [Volume 34, Issue 2, 2015, Pages 31-48]
  • Solvent extraction Purification of Gold from Chloride Leach Liquor of Copper Anode Slime by Octanol-Kerosene Organic Extractant [Volume 34, Issue 2, 2015, Pages 71-78]
  • Space holder Effect of Al2O3 Particles on Mechanical Properties of Al-(0-40%)Al2O3 Composite Foams Produced by Low Energy Mechanical Alloying [Volume 34, Issue 1, 2015, Pages 1-8]
  • St 37 low carbon steel Investigation of the Mechanical Properties of AISI 316 Austenitic Stainless Steel and St 37 Low Carbon Steel Dissimilar Joint by Friction Stir Welding [Volume 34, Issue 2, 2015, Pages 89-101]
  • Stripping Purification of Gold from Chloride Leach Liquor of Copper Anode Slime by Octanol-Kerosene Organic Extractant [Volume 34, Issue 2, 2015, Pages 71-78]
  • Strontium hexaferrite Effect of Mg, Co and Ti Cations on Magnetic and Microwave Properties of SrFe12O19 Nanoparticles [Volume 34, Issue 4, 2015, Pages 19-31]
  • Super-hydrophobic Comparison of Super-Hydrophobicity and Corrosion Resistance of Micro-Nano Structured Nickel and Nickel- Cobalt Alloy Coatings on Copper Substrate [Volume 34, Issue 4, 2015, Pages 87-105]

T

  • Ti47Al48Mn5 Investigating the Effect of Microstructure on Oxidation Behavior of Ti47Al48Mn5 Alloy Synthesized by Mechanical Alloying [Volume 34, Issue 2, 2015, Pages 31-48]
  • TiB2 Synthesis of MoSi2-TiB2 Nanocomposite by Mechanical Alloying through Two Methods and Comparison of Their Properties for Use in Thermal Spraying Process [Volume 34, Issue 2, 2015, Pages 1-17]
  • TiO2 Transparency Effect of Electrolyte on Light Back-Scattering in Dye-Sensitized Solar Cells [Volume 34, Issue 3, 2015, Pages 59-67]
  • Titanium Aluminide-Alumina composite Effect of Excess Al in TiO2-Al Powder Mixture and Susceptor Material on Microwave Synthesis of TiAl/Al2O3 Composite [Volume 34, Issue 4, 2015, Pages 53-60]
  • Tribological behavior Influence of Gr and MoS2 Particles on High Temperature Tribological Properties of Ni-SiC Composite Coating [Volume 34, Issue 1, 2015, Pages 105-121]

U

  • Ultra-fine grained steel Fabrication of Ultra-Fine Grained Plain Low Carbon Steel through Dynamic Strain Induced Transformation during Integrated Extrusion Equal Channel Angular Pressing [Volume 34, Issue 4, 2015, Pages 73-85]
  • USD7 steel Effect of Aluminium Injection into the Crystalizator on Type, Composition and Activity of Inclusions in Low Carbon Steel [Volume 34, Issue 1, 2015, Pages 9-23]

W

  • Willemite Fabrication and Characterization of Novel Willemite Nanobioceramic for Bone Defect Repair [Volume 34, Issue 1, 2015, Pages 79-86]

Y

  • Yttrium oxide Fabrication of Yttria Nanopowder by Precipitation Method Using Micro Meter Powder [Volume 34, Issue 3, 2015, Pages 97-106]

Z

  • ZnO Density Functional Theory Calculation on Improving the Photocatalytic Properties of Zinc Oxide and Cadmium Sulfide by Hybridization with Metal-Organic Framework [Volume 34, Issue 4, 2015, Pages 107-113]

تحت نظارت وف ایرانی