A
-
Abdolahi, A.
Preparation and characterization of the solâgel nano-bioactive glasses modiïed by the coupling agent 3-(Trimethoxysilyl) Propyl methacrylate [Volume 35, Issue 1, 2016, Pages 23-33]
-
Ahmadi, S.
Effects of Nb on Increasing Glass Form Ability in Fe- based Amorphous Alloys of Fe55-xCr18Mo7B16C4Nbx (X=0, 3, 4, 5) [Volume 35, Issue 2, 2016, Pages 67-81]
-
Ahmadi Brooghani, S.Y.
Effect of Stone-Wales Defect on Ultimate Strength of Carbon Nanotubes [Volume 35, Issue 1, 2016, Pages 83-97]
-
Ashrafizadeh, F.
Cladding of Cr- Modified NiAl Coating on 310 Stainless Steel Weld Cladding and Evaluation of its Wear Behavior. [Volume 35, Issue 4, 2017, Pages 39-50]
-
Aslibeiki, B.
Preparation of Cobalt Ferrite Nanocrystallites by Annealing of Alloyed Intermetallic Co-Fe and Study of Magnetic Behavior [Volume 35, Issue 4, 2017, Pages 83-89]
-
Assadi, M.
Evaluation and Comparison of the Effects of RRA, T73 and T6 Heat Treatments on Hardness, Tensile and Bending Strengths of 7075 Aluminum Alloy [Volume 35, Issue 2, 2016, Pages 11-30]
-
Atapour, M.
Cladding of Cr- Modified NiAl Coating on 310 Stainless Steel Weld Cladding and Evaluation of its Wear Behavior. [Volume 35, Issue 4, 2017, Pages 39-50]
-
Avishan, B.
Effect of Dislocation Density on Deformation Behavior of Super Strong Bainitic Steel [Volume 35, Issue 4, 2017, Pages 101-111]
-
Azadbeh, M.
An Investigation of Evolutions during Liquid Phase Sintering of Systems with Volatile Components [Volume 35, Issue 3, 2016, Pages 95-105]
B
-
Babakhani, A.
Fabrication of AA356/SiCp Aluminum Composite Foam via In-Situ Foaming Route of Melt using CaCO3 Foaming Agent and an Investigation of its Compressive Properties [Volume 35, Issue 4, 2017, Pages 51-68]
-
Bahrami, M.
Synthesis and Characterization of Hybrid Silica-Zirconia Coatings with Cerium Inhibitor on Aluminum 6061 [Volume 35, Issue 3, 2016, Pages 1-12]
-
Bakhshi, S.R.
Synthesis and Characterization of Hybrid Silica-Zirconia Coatings with Cerium Inhibitor on Aluminum 6061 [Volume 35, Issue 3, 2016, Pages 1-12]
-
Baniadam, M.
Novel Approach for Electrochemical Functionalization of Graphene with Surfactant [Volume 35, Issue 4, 2017, Pages 27-38]
-
Baradaran, M.
Preparation and Characterization of Polycaprolactone / Layered Double Hydroxide Nanocomposite for Hard Tissue Engineering Applications [Volume 35, Issue 3, 2016, Pages 13-28]
-
Bestetti, M.
Study on the Effect of Annealing Process on Microstructure and Electrochemical Behavior of the Binary Mn-Ni Nano-Oxide Pseudocapacitor Synthesized by Anodic Deposition [Volume 35, Issue 3, 2016, Pages 107-121]
-
Binesh, B.
Microstructure Evolution and Mechanical Properties of TLP Bonded Joint of IN-738LC Superalloy using MBF-20 Amorphous Foil [Volume 35, Issue 3, 2016, Pages 123-137]
-
Borhani, G.H.
Synthesis and Characterization of Hybrid Silica-Zirconia Coatings with Cerium Inhibitor on Aluminum 6061 [Volume 35, Issue 3, 2016, Pages 1-12]
-
Borouni, M.
Effects of Friction Stir Processing and T6 Heat Treatment on Wear Properties of Weld Metal of Cast AZ91C Alloy [Volume 35, Issue 1, 2016, Pages 99-107]
D
-
Davar, F.
Synthesis of La3+ and Nd3+ co-Doped Yttria Nanopowder by Sol-Gel Combustion Method [Volume 35, Issue 4, 2017, Pages 1-11]
-
Davar, F.
Synthesis of La3+ and Nd3+ co-Doped Yttria Nanopowder by Sol-Gel Combustion Method [Volume 35, Issue 4, 2017, Pages 1-11]
-
Deljavan, S.
Investigation of Tantalum Cation Doped Ba (Co0.8Fe0.2) O3âδ Perovskite Phase [Volume 35, Issue 1, 2016, Pages 47-55]
-
Divandari, M.
Effects of Melt/Solid Volume Ratio and Rotational Speed on the Interface of Al/Mg Bimetal in Centrifugal Casting [Volume 35, Issue 2, 2016, Pages 83-94]
-
Doostmohammadi, A.
Preparation and characterization of the solâgel nano-bioactive glasses modiïed by the coupling agent 3-(Trimethoxysilyl) Propyl methacrylate [Volume 35, Issue 1, 2016, Pages 23-33]
-
Doostmohammadi, A.
Fabrication of Chitosan/Poly (vinyl alcohol)/Carbon Nanotube/Bioactive Glass Nanocomposite Scaffolds for Neural Tissue Engineering [Volume 35, Issue 1, 2016, Pages 35-46]
-
Doostmohammdi, A.
A Comparative Study of the Addition Effect of Diopside and Silica Sulfuric Acid Nanoparticles on Mechanical Properties of Glass Ionomer Cements [Volume 35, Issue 2, 2016, Pages 131-144]
E
-
Emadi, R.
Use of Optimization Algorithm for Simulation of Spark Plasma Sintering Process in Si3N4-SiO2 Composite [Volume 35, Issue 3, 2016, Pages 29-43]
-
Enayati, M.
Effects of Friction Stir Processing and T6 Heat Treatment on Wear Properties of Weld Metal of Cast AZ91C Alloy [Volume 35, Issue 1, 2016, Pages 99-107]
-
Esmaeili, F.
Fabrication of Chitosan/Poly (vinyl alcohol)/Carbon Nanotube/Bioactive Glass Nanocomposite Scaffolds for Neural Tissue Engineering [Volume 35, Issue 1, 2016, Pages 35-46]
-
Esmaeily, A.S.
Elimination of Mn3Ga with Low Crystal Symmetry in Alloying Mn-Ga by Ge Addition [Volume 35, Issue 2, 2016, Pages 55-65]
F
-
Faqeeh, A.
Preparation of Cobalt Ferrite Nanocrystallites by Annealing of Alloyed Intermetallic Co-Fe and Study of Magnetic Behavior [Volume 35, Issue 4, 2017, Pages 83-89]
-
Foroghi, A. R.
Microstructure Evolution and Mechanical Properties of TLP Bonded Joint of IN-738LC Superalloy using MBF-20 Amorphous Foil [Volume 35, Issue 3, 2016, Pages 123-137]
G
-
Ghasemi, A.
The Role of Annealing Temperature on Structural and Magnetic Properties of NdFeB Thin Films [Volume 35, Issue 1, 2016, Pages 109-119]
-
Ghasemi, A.
Development of High Energy Thin Layers of Exchange Spring Magnets Originating from Rare Earth Magnets of NdFeB/FeCo [Volume 35, Issue 2, 2016, Pages 1-10]
-
Ghasemi, A.
Synthesis and Characterization of Hybrid Silica-Zirconia Coatings with Cerium Inhibitor on Aluminum 6061 [Volume 35, Issue 3, 2016, Pages 1-12]
-
Ghasemi, A.
Use of Optimization Algorithm for Simulation of Spark Plasma Sintering Process in Si3N4-SiO2 Composite [Volume 35, Issue 3, 2016, Pages 29-43]
-
Gholipour, S.
Evaluation of Hydrogen Damage in Aluminum 7075 Alloy after Dissolution Annealing and Two-stage Aging [Volume 35, Issue 1, 2016, Pages 1-10]
-
Ghorbani, S.
Synthesis of La3+ and Nd3+ co-Doped Yttria Nanopowder by Sol-Gel Combustion Method [Volume 35, Issue 4, 2017, Pages 1-11]
-
Golestanipour, M.
Fabrication of AA356/SiCp Aluminum Composite Foam via In-Situ Foaming Route of Melt using CaCO3 Foaming Agent and an Investigation of its Compressive Properties [Volume 35, Issue 4, 2017, Pages 51-68]
-
Golozar, M. A.
Study on the Effect of Annealing Process on Microstructure and Electrochemical Behavior of the Binary Mn-Ni Nano-Oxide Pseudocapacitor Synthesized by Anodic Deposition [Volume 35, Issue 3, 2016, Pages 107-121]
-
Golozar, M. A.
Study on the Effect of Annealing Process on Microstructure and Electrochemical Behavior of the Binary Mn-Ni Nano-Oxide Pseudocapacitor Synthesized by Anodic Deposition [Volume 35, Issue 3, 2016, Pages 107-121]
H
-
Hadi, M.
The Role of Annealing Temperature on Structural and Magnetic Properties of NdFeB Thin Films [Volume 35, Issue 1, 2016, Pages 109-119]
-
Hakimi, M.
Elimination of Mn3Ga with Low Crystal Symmetry in Alloying Mn-Ga by Ge Addition [Volume 35, Issue 2, 2016, Pages 55-65]
-
Hakimi, M.
Effect of Preparation Method on Phase Formation Process and Structural and Magnetic Properties of Mn2.5Ge Samples [Volume 35, Issue 3, 2016, Pages 45-56]
-
Hakimi, M.
Preparation of Cobalt Ferrite Nanocrystallites by Annealing of Alloyed Intermetallic Co-Fe and Study of Magnetic Behavior [Volume 35, Issue 4, 2017, Pages 83-89]
-
Hasani, A.
Novel Approach for Electrochemical Functionalization of Graphene with Surfactant [Volume 35, Issue 4, 2017, Pages 27-38]
-
Hassani, B.
Effects of Friction Stir Processing and T6 Heat Treatment on Wear Properties of Weld Metal of Cast AZ91C Alloy [Volume 35, Issue 1, 2016, Pages 99-107]
-
Hosseini, S.R.
Evaluation of Hydrogen Damage in Aluminum 7075 Alloy after Dissolution Annealing and Two-stage Aging [Volume 35, Issue 1, 2016, Pages 1-10]
-
Hosseini, S.R.
Evaluation and Comparison of the Effects of RRA, T73 and T6 Heat Treatments on Hardness, Tensile and Bending Strengths of 7075 Aluminum Alloy [Volume 35, Issue 2, 2016, Pages 11-30]
J
-
Jafarian, M.
The Comparison of Microstructure and Mechanical Properties of Diffusion Joints of 5754, 6061, and 7039 Aluminum Alloys to AZ31 Magnesium Alloy [Volume 35, Issue 1, 2016, Pages 11-21]
-
Jafarian, M.
The Comparison of Microstructure and Mechanical Properties of Diffusion Joints of 5754, 6061, and 7039 Aluminum Alloys to AZ31 Magnesium Alloy [Volume 35, Issue 1, 2016, Pages 11-21]
-
Jafarian, M.
Investigating the Effect of Co-Cr-Sn Ions Substitution on Microstructure and Magnetic Properties of M-type Barium Hexaferrites [Volume 35, Issue 3, 2016, Pages 69-80]
-
JazayeriGharehbagh, A.
Microstructure Evolution and Mechanical Properties of TLP Bonded Joint of IN-738LC Superalloy using MBF-20 Amorphous Foil [Volume 35, Issue 3, 2016, Pages 123-137]
K
-
Kakroudi, M. G.
Investigation of Tantalum Cation Doped Ba (Co0.8Fe0.2) O3âδ Perovskite Phase [Volume 35, Issue 1, 2016, Pages 47-55]
-
Kalantar, M.
Investigation of Reaction Mechanism, Structure and Mechanical Properties of the In-situ Composites Fabricated in Al-V2O5-NiO System [Volume 35, Issue 4, 2017, Pages 69-81]
-
Kalantar, M.
Investigation of Reaction Mechanism, Structure and Mechanical Properties of the In-situ Composites Fabricated in Al-V2O5-NiO System [Volume 35, Issue 4, 2017, Pages 69-81]
-
Kameli, P.
Effect of Preparation Method on Phase Formation Process and Structural and Magnetic Properties of Mn2.5Ge Samples [Volume 35, Issue 3, 2016, Pages 45-56]
-
Kameli, P.
Preparation of Cobalt Ferrite Nanocrystallites by Annealing of Alloyed Intermetallic Co-Fe and Study of Magnetic Behavior [Volume 35, Issue 4, 2017, Pages 83-89]
-
Karimzadeh, F.
Effects of Friction Stir Processing and T6 Heat Treatment on Wear Properties of Weld Metal of Cast AZ91C Alloy [Volume 35, Issue 1, 2016, Pages 99-107]
-
Karimzadeh, F.L.
Evaluation of Properties of Crofer Stainless Steel Produced by Mechanical Alloying for Using as Interconnect Plates of Solid Oxide Fuel Cells [Volume 35, Issue 2, 2016, Pages 95-113]
-
Khajeh Aminian, M.
Effect of Preparation Method on Phase Formation Process and Structural and Magnetic Properties of Mn2.5Ge Samples [Volume 35, Issue 3, 2016, Pages 45-56]
-
Khanjani, A.
The Role of Annealing Temperature on Structural and Magnetic Properties of NdFeB Thin Films [Volume 35, Issue 1, 2016, Pages 109-119]
-
Khanjani, A. R.
Development of High Energy Thin Layers of Exchange Spring Magnets Originating from Rare Earth Magnets of NdFeB/FeCo [Volume 35, Issue 2, 2016, Pages 1-10]
-
Khorrami Mokhori, B.
Evaluating the Properties of High-Temperature and Low-Temperature Wear of TiN Coatings Deposited at Different Temperatures [Volume 35, Issue 4, 2017, Pages 91-100]
L
-
Loghman-Estarki, M.R.
Synthesis of La3+ and Nd3+ co-Doped Yttria Nanopowder by Sol-Gel Combustion Method [Volume 35, Issue 4, 2017, Pages 1-11]
-
Lotfi, B.
Formation and Microstructural Characterization of Co-DepositedSilicon Aluminide Coating Produced by Pack Cementation Process at High Temperature [Volume 35, Issue 4, 2017, Pages 113-125]
M
-
Maghrebi, M.
Novel Approach for Electrochemical Functionalization of Graphene with Surfactant [Volume 35, Issue 4, 2017, Pages 27-38]
-
Manouchehri, S.
The Effect of Magnesium Substitution and Sintering Temperature on the Structural and Magnetic Properties of Manganese- Magnesium Ferrite [Volume 35, Issue 3, 2016, Pages 81-94]
-
Mashreghi, A.
Investigation of Reaction Mechanism, Structure and Mechanical Properties of the In-situ Composites Fabricated in Al-V2O5-NiO System [Volume 35, Issue 4, 2017, Pages 69-81]
-
Mirarabshahi, F.
Investigation of Reaction Mechanism, Structure and Mechanical Properties of the In-situ Composites Fabricated in Al-V2O5-NiO System [Volume 35, Issue 4, 2017, Pages 69-81]
-
Mohammadi Benehi, S.T.
The Effect of Magnesium Substitution and Sintering Temperature on the Structural and Magnetic Properties of Manganese- Magnesium Ferrite [Volume 35, Issue 3, 2016, Pages 81-94]
-
Mohammadzadeh, A.
An Investigation of Evolutions during Liquid Phase Sintering of Systems with Volatile Components [Volume 35, Issue 3, 2016, Pages 95-105]
-
Mokhtari, H.
Elimination of Mn3Ga with Low Crystal Symmetry in Alloying Mn-Ga by Ge Addition [Volume 35, Issue 2, 2016, Pages 55-65]
-
Mortazavi, S.Z.
Preparation and Characterization of Polycaprolactone / Layered Double Hydroxide Nanocomposite for Hard Tissue Engineering Applications [Volume 35, Issue 3, 2016, Pages 13-28]
-
Mosalaei, M.
Investigation of Reaction Mechanism, Structure and Mechanical Properties of the In-situ Composites Fabricated in Al-V2O5-NiO System [Volume 35, Issue 4, 2017, Pages 69-81]
-
Mosleh, A.
Characterization of Al-CNT Composite Nanoparticles Synthesized by Electrical Explosion of Wire in Acetone [Volume 35, Issue 2, 2016, Pages 47-53]
-
Mouchani, P.
Optimization of the Silver Nanoparticles Synthesis and Printing a Conductive Pattern [Volume 35, Issue 4, 2017, Pages 13-25]
-
Mousapour, M.
An Investigation of Evolutions during Liquid Phase Sintering of Systems with Volatile Components [Volume 35, Issue 3, 2016, Pages 95-105]
-
Moztarzadeh, F.
Preparation and Characterization of Polycaprolactone / Layered Double Hydroxide Nanocomposite for Hard Tissue Engineering Applications [Volume 35, Issue 3, 2016, Pages 13-28]
N
-
Nazari, F.
Elimination of Mn3Ga with Low Crystal Symmetry in Alloying Mn-Ga by Ge Addition [Volume 35, Issue 2, 2016, Pages 55-65]
-
Nezafati, N.
Synthesis and Characterization of Silicate Calcium Phosphate Bioactive Glass Prepared by Electrospinning Method [Volume 35, Issue 1, 2016, Pages 57-69]
-
Nikbakht Katouli, S.
Fabrication of Chitosan/Poly (vinyl alcohol)/Carbon Nanotube/Bioactive Glass Nanocomposite Scaffolds for Neural Tissue Engineering [Volume 35, Issue 1, 2016, Pages 35-46]
-
Niroumand, B.
Effect of Structure and Surface Roughness on Wetting Angle of a Hypoeutectic Cast Iron [Volume 35, Issue 2, 2016, Pages 31-45]
-
Niroumand, B.
Effect of Structure and Surface Roughness on Wetting Angle of a Hypoeutectic Cast Iron [Volume 35, Issue 2, 2016, Pages 31-45]
P
-
Paidar, M.
The Comparison of Microstructure and Mechanical Properties of Diffusion Joints of 5754, 6061, and 7039 Aluminum Alloys to AZ31 Magnesium Alloy [Volume 35, Issue 1, 2016, Pages 11-21]
-
Pourkarimi, M.
Formation and Microstructural Characterization of Co-DepositedSilicon Aluminide Coating Produced by Pack Cementation Process at High Temperature [Volume 35, Issue 4, 2017, Pages 113-125]
-
Pourmohamadi, S.
Cladding of Cr- Modified NiAl Coating on 310 Stainless Steel Weld Cladding and Evaluation of its Wear Behavior. [Volume 35, Issue 4, 2017, Pages 39-50]
-
Poursalehi, R.
Characterization of Al-CNT Composite Nanoparticles Synthesized by Electrical Explosion of Wire in Acetone [Volume 35, Issue 2, 2016, Pages 47-53]
R
-
Raeissi, K.
Electrodeposition and Characterization of Nanocrystalline Nickel- Molybdenum Alloy [Volume 35, Issue 1, 2016, Pages 71-81]
-
Raeissi, K.
Evaluation of Properties of Crofer Stainless Steel Produced by Mechanical Alloying for Using as Interconnect Plates of Solid Oxide Fuel Cells [Volume 35, Issue 2, 2016, Pages 95-113]
-
Raeissi, K.
Study on the Effect of Annealing Process on Microstructure and Electrochemical Behavior of the Binary Mn-Ni Nano-Oxide Pseudocapacitor Synthesized by Anodic Deposition [Volume 35, Issue 3, 2016, Pages 107-121]
-
Rajaei, V.
Electrodeposition and Characterization of Nanocrystalline Nickel- Molybdenum Alloy [Volume 35, Issue 1, 2016, Pages 71-81]
-
Rashtchi, H.
Electrodeposition and Characterization of Nanocrystalline Nickel- Molybdenum Alloy [Volume 35, Issue 1, 2016, Pages 71-81]
-
Razavi, R.S.
Synthesis of La3+ and Nd3+ co-Doped Yttria Nanopowder by Sol-Gel Combustion Method [Volume 35, Issue 4, 2017, Pages 1-11]
-
Razavi, R.S.
Synthesis of La3+ and Nd3+ co-Doped Yttria Nanopowder by Sol-Gel Combustion Method [Volume 35, Issue 4, 2017, Pages 1-11]
-
Rezaei, F.
Investigation of Tantalum Cation Doped Ba (Co0.8Fe0.2) O3âδ Perovskite Phase [Volume 35, Issue 1, 2016, Pages 47-55]
-
Rezaeinia, M.
Use of Optimization Algorithm for Simulation of Spark Plasma Sintering Process in Si3N4-SiO2 Composite [Volume 35, Issue 3, 2016, Pages 29-43]
-
Rezazadeh, M.
A Comparative Study of the Addition Effect of Diopside and Silica Sulfuric Acid Nanoparticles on Mechanical Properties of Glass Ionomer Cements [Volume 35, Issue 2, 2016, Pages 131-144]
-
Rezazadeh, M.
Use of Optimization Algorithm for Simulation of Spark Plasma Sintering Process in Si3N4-SiO2 Composite [Volume 35, Issue 3, 2016, Pages 29-43]
-
Rezvani, M.
Evaluation of Properties of Crofer Stainless Steel Produced by Mechanical Alloying for Using as Interconnect Plates of Solid Oxide Fuel Cells [Volume 35, Issue 2, 2016, Pages 95-113]
-
Riahi, S.
Effect of Structure and Surface Roughness on Wetting Angle of a Hypoeutectic Cast Iron [Volume 35, Issue 2, 2016, Pages 31-45]
-
Riahi Noori, N.
Optimization of the Silver Nanoparticles Synthesis and Printing a Conductive Pattern [Volume 35, Issue 4, 2017, Pages 13-25]
S
-
Saatchi, A.
Use of Optimization Algorithm for Simulation of Spark Plasma Sintering Process in Si3N4-SiO2 Composite [Volume 35, Issue 3, 2016, Pages 29-43]
-
Saatchi, A.
Use of Optimization Algorithm for Simulation of Spark Plasma Sintering Process in Si3N4-SiO2 Composite [Volume 35, Issue 3, 2016, Pages 29-43]
-
Saeri, M. R.
Preparation and characterization of the solâgel nano-bioactive glasses modiïed by the coupling agent 3-(Trimethoxysilyl) Propyl methacrylate [Volume 35, Issue 1, 2016, Pages 23-33]
-
Saeri, M.R.
A Comparative Study of the Addition Effect of Diopside and Silica Sulfuric Acid Nanoparticles on Mechanical Properties of Glass Ionomer Cements [Volume 35, Issue 2, 2016, Pages 131-144]
-
Safari, M.
Effect of Deep Cryogenic Treatment on Hardness and Wear Behavior of 5120 AISI Steel [Volume 35, Issue 3, 2016, Pages 57-67]
-
Salehi, M.
Investigating the Effect of Co-Cr-Sn Ions Substitution on Microstructure and Magnetic Properties of M-type Barium Hexaferrites [Volume 35, Issue 3, 2016, Pages 69-80]
-
Sarraf Mamoori, R.
Optimization of the Silver Nanoparticles Synthesis and Printing a Conductive Pattern [Volume 35, Issue 4, 2017, Pages 13-25]
-
Sarvari, M.
Effects of Melt/Solid Volume Ratio and Rotational Speed on the Interface of Al/Mg Bimetal in Centrifugal Casting [Volume 35, Issue 2, 2016, Pages 83-94]
-
Seyyed Afghahi, S. S.
Investigating the Effect of Co-Cr-Sn Ions Substitution on Microstructure and Magnetic Properties of M-type Barium Hexaferrites [Volume 35, Issue 3, 2016, Pages 69-80]
-
Shafiei, S.S.
Preparation and Characterization of Polycaprolactone / Layered Double Hydroxide Nanocomposite for Hard Tissue Engineering Applications [Volume 35, Issue 3, 2016, Pages 13-28]
-
Shafyei, A.
Effect of Deep Cryogenic Treatment on Hardness and Wear Behavior of 5120 AISI Steel [Volume 35, Issue 3, 2016, Pages 57-67]
-
Shafyei, A.
Effect of Deep Cryogenic Treatment on Hardness and Wear Behavior of 5120 AISI Steel [Volume 35, Issue 3, 2016, Pages 57-67]
-
Shafyei, A.
Evaluating the Properties of High-Temperature and Low-Temperature Wear of TiN Coatings Deposited at Different Temperatures [Volume 35, Issue 4, 2017, Pages 91-100]
-
Shafyei, A.
Evaluating the Properties of High-Temperature and Low-Temperature Wear of TiN Coatings Deposited at Different Temperatures [Volume 35, Issue 4, 2017, Pages 91-100]
-
Shahriari Nogorani, F.
Formation and Microstructural Characterization of Co-DepositedSilicon Aluminide Coating Produced by Pack Cementation Process at High Temperature [Volume 35, Issue 4, 2017, Pages 113-125]
-
Shahverdi, H.
Characterization of Al-CNT Composite Nanoparticles Synthesized by Electrical Explosion of Wire in Acetone [Volume 35, Issue 2, 2016, Pages 47-53]
-
Shahverdi, H. R.
Effects of Nb on Increasing Glass Form Ability in Fe- based Amorphous Alloys of Fe55-xCr18Mo7B16C4Nbx (X=0, 3, 4, 5) [Volume 35, Issue 2, 2016, Pages 67-81]
-
Shamanian, M.
Electrodeposition and Characterization of Nanocrystalline Nickel- Molybdenum Alloy [Volume 35, Issue 1, 2016, Pages 71-81]
-
Shamsi, M.
Synthesis and Characterization of Silicate Calcium Phosphate Bioactive Glass Prepared by Electrospinning Method [Volume 35, Issue 1, 2016, Pages 57-69]
-
Sharifi, H.
Preparation and characterization of the solâgel nano-bioactive glasses modiïed by the coupling agent 3-(Trimethoxysilyl) Propyl methacrylate [Volume 35, Issue 1, 2016, Pages 23-33]
-
Shirinparvar, S.
Synthesis of La3+ and Nd3+ co-Doped Yttria Nanopowder by Sol-Gel Combustion Method [Volume 35, Issue 4, 2017, Pages 1-11]
-
Shoja Razavi, R.
Evaluation of Hydrogen Damage in Aluminum 7075 Alloy after Dissolution Annealing and Two-stage Aging [Volume 35, Issue 1, 2016, Pages 1-10]
-
Sobhani, R.
Effect of Preparation Method on Phase Formation Process and Structural and Magnetic Properties of Mn2.5Ge Samples [Volume 35, Issue 3, 2016, Pages 45-56]
T
-
Tahavvori, R.
Investigating Formation of Intermetallics in Compound Casting of Al/Cu Bimetals [Volume 35, Issue 2, 2016, Pages 115-129]
-
Tahmasebi, M. H.
Study on the Effect of Annealing Process on Microstructure and Electrochemical Behavior of the Binary Mn-Ni Nano-Oxide Pseudocapacitor Synthesized by Anodic Deposition [Volume 35, Issue 3, 2016, Pages 107-121]
-
Tavassoli, S.
Investigating Formation of Intermetallics in Compound Casting of Al/Cu Bimetals [Volume 35, Issue 2, 2016, Pages 115-129]
-
Tirgir, F.
Preparation and characterization of the solâgel nano-bioactive glasses modiïed by the coupling agent 3-(Trimethoxysilyl) Propyl methacrylate [Volume 35, Issue 1, 2016, Pages 23-33]
-
Tirgir Malkhlifeh, F.
A Comparative Study of the Addition Effect of Diopside and Silica Sulfuric Acid Nanoparticles on Mechanical Properties of Glass Ionomer Cements [Volume 35, Issue 2, 2016, Pages 131-144]
-
Torkian, S.
Effect of Deep Cryogenic Treatment on Hardness and Wear Behavior of 5120 AISI Steel [Volume 35, Issue 3, 2016, Pages 57-67]
-
Toroghinejad, M.R.
Effect of Deep Cryogenic Treatment on Hardness and Wear Behavior of 5120 AISI Steel [Volume 35, Issue 3, 2016, Pages 57-67]
-
Toroghinejad, M.R.
Effect of Deep Cryogenic Treatment on Hardness and Wear Behavior of 5120 AISI Steel [Volume 35, Issue 3, 2016, Pages 57-67]
V
-
Vicenzo, A.
Study on the Effect of Annealing Process on Microstructure and Electrochemical Behavior of the Binary Mn-Ni Nano-Oxide Pseudocapacitor Synthesized by Anodic Deposition [Volume 35, Issue 3, 2016, Pages 107-121]
Y
-
Yazdani, D.
Effect of Stone-Wales Defect on Ultimate Strength of Carbon Nanotubes [Volume 35, Issue 1, 2016, Pages 83-97]
-
Yousefi, M.H.
The Effect of Magnesium Substitution and Sintering Temperature on the Structural and Magnetic Properties of Manganese- Magnesium Ferrite [Volume 35, Issue 3, 2016, Pages 81-94]
Z
-
Zamanian, A.
Synthesis and Characterization of Silicate Calcium Phosphate Bioactive Glass Prepared by Electrospinning Method [Volume 35, Issue 1, 2016, Pages 57-69]
-
Zaroodi, J.
Investigation of Tantalum Cation Doped Ba (Co0.8Fe0.2) O3âδ Perovskite Phase [Volume 35, Issue 1, 2016, Pages 47-55]
-
Zavareh, S.
Synthesis and Characterization of Silicate Calcium Phosphate Bioactive Glass Prepared by Electrospinning Method [Volume 35, Issue 1, 2016, Pages 57-69]
-
Zebarjad, S.M.
Fabrication of AA356/SiCp Aluminum Composite Foam via In-Situ Foaming Route of Melt using CaCO3 Foaming Agent and an Investigation of its Compressive Properties [Volume 35, Issue 4, 2017, Pages 51-68]
Your query does not match with any item