Keyword Index

A

  • AlCoCrMnNiX(X= B The Effect of Si and B Addition on the Structural and Magnetic Properties of AlCoCrMnNi High Entropy Alloys [Volume 39, Issue 4, 2020, Pages 131-144]
  • Alloy interconnect Development of Copper-Ferrite Spinel Coating on AISI 430 Steel Used as Solid Oxide Fuel Cell [Volume 39, Issue 4, 2020, Pages 23-44]
  • Aluminide coating Formation and Evaluation of Oxidation Behavior of Zirconia- Aluminide Coating on Nickel- Based Alloy [Volume 39, Issue 1, 2020, Pages 1-12]
  • Aluminum trihydrate (ATH) Investigation of the Effect of Adding Aluminum Trihydrate (ATH) Particles on Electrical and Hydrophobic Properties of Two-Part RTV Silicon Rubber [Volume 39, Issue 3, 2020, Pages 117-128]
  • Amorphous silica Effect of Amorphous Silica Addition on Martensitic Phase Transformation of Zirconia and Investigation of its Tetragonal Structure Stability Mechanisms [Volume 39, Issue 2, 2020, Pages 49-63]
  • Amorphous silicon The Role of Annealing on Properties of Silicon Films Deposited By EB-PVD [Volume 39, Issue 1, 2020, Pages 99-103]

B

  • Bimetal Production of W-Cu-Ni Alloy and Cu Bimetal by SPS Process and Analysis of Process Parameters [Volume 39, Issue 4, 2020, Pages 61-76]
  • Bridgman method Evaluating the Effect of Ta/W Ratio on Microstructure and Stress Rupture Properties of Ni-Based Single Crystal Superalloy PWA1483 [Volume 39, Issue 3, 2020, Pages 1-18]
  • Bulk metallic glass Effect of Temperature and Strain Rate on Plastic Deformation Behavior of Zr46(Cu4.5/5.5Ag1/5.5)46Al8 Bulk Metallic Glass [Volume 39, Issue 3, 2020, Pages 129-140]

C

  • Chelating agents Effect of Neodymium Dopping on Morphology, Phase and Magnetic Properties of Ni0.7Zn0.3NdxFe2-xO4 Ferrite Nanoparticles Synthesized by Complexing Sol-Gel Method [Volume 39, Issue 2, 2020, Pages 121-136]
  • Chemical vapor deposition (CVD) Fabrication of Nerve Guide Conduit Based on 3D Graphene/ Polymer for Nerve Tissue Engineering [Volume 39, Issue 1, 2020, Pages 61-73]
  • Chromium oxide scale Development of Copper-Ferrite Spinel Coating on AISI 430 Steel Used as Solid Oxide Fuel Cell [Volume 39, Issue 4, 2020, Pages 23-44]
  • Coating agent Influence of Temperature, Time, pH, Capping Agent Concentration and Zn/Se Molar Ratio on Morphology and Phase Evolution of Zinc Selenide Nanoparticles Synthesized by Hydrothermal Method [Volume 39, Issue 3, 2020, Pages 19-39]
  • Cobalt schiff base complexes Synthesis, Characterization and Investigation of Magnetic Properties of Co3O4/CoFe2O4 Nanocomposite Prepared by Calcination of [CO(SALEN)(PPH3)(H2O)]4[Fe(CN)6] and [Co(Salophen)(PPH3)(H2O)]4[Fe(CN)6] Binary Complex Salts [Volume 39, Issue 2, 2020, Pages 81-101]
  • Composite coating Development of Al-Ti-N Composite Coatings on Commercially Pure Ti Surface by Tungsten Inert Gas Process [Volume 39, Issue 3, 2020, Pages 73-98]
  • Composite coating Evaluating the Effect of the Number of Welding Passes on Microstructure, Hardness and Residual Stress of Ti-Al-Si Composite Coatings [Volume 39, Issue 4, 2020, Pages 1-21]
  • Composite electroplating Formation and Evaluation of Oxidation Behavior of Zirconia- Aluminide Coating on Nickel- Based Alloy [Volume 39, Issue 1, 2020, Pages 1-12]
  • Copper Production of W-Cu-Ni Alloy and Cu Bimetal by SPS Process and Analysis of Process Parameters [Volume 39, Issue 4, 2020, Pages 61-76]
  • Copper nitrate Synthesis of the Silicon Inverted Nano- Pyramids and Study of Their Self- Cleaning Behavior [Volume 39, Issue 1, 2020, Pages 47-59]
  • Corrosion Development of Al-Ti-N Composite Coatings on Commercially Pure Ti Surface by Tungsten Inert Gas Process [Volume 39, Issue 3, 2020, Pages 73-98]
  • Cyclic oxidation Formation and Evaluation of Oxidation Behavior of Zirconia- Aluminide Coating on Nickel- Based Alloy [Volume 39, Issue 1, 2020, Pages 1-12]

D

  • Dexamethasone Fabrication of Poly (Lactic Acid) Nanofiber Carrier Loaded with Dexamethasone Drug [Volume 39, Issue 2, 2020, Pages 21-34]
  • Dip coating Fabrication of Nerve Guide Conduit Based on 3D Graphene/ Polymer for Nerve Tissue Engineering [Volume 39, Issue 1, 2020, Pages 61-73]
  • Drop coating Fabrication of Nerve Guide Conduit Based on 3D Graphene/ Polymer for Nerve Tissue Engineering [Volume 39, Issue 1, 2020, Pages 61-73]
  • Drug delivery Fabrication of Poly (Lactic Acid) Nanofiber Carrier Loaded with Dexamethasone Drug [Volume 39, Issue 2, 2020, Pages 21-34]
  • Dynamic recrystallization Determining the Hot Deformation Temperature Range of Medium Carbon Ni-Cr-Mo Low Alloy Steels using Hot Tensile and Hot Torsion Tests [Volume 39, Issue 3, 2020, Pages 99-115]

E

  • EBPVD The Role of Annealing on Properties of Silicon Films Deposited By EB-PVD [Volume 39, Issue 1, 2020, Pages 99-103]
  • Electric arc discharge Synthesis of Zinc/Zinc Oxide Nanoparticles by Electric Discharge Method in Distilled-Water and Argon-Gas Environments [Volume 39, Issue 2, 2020, Pages 35-48]
  • Electrochemical methods Effect of Plasma Electrolytic Oxidation Process as a Pretreatment on Corrosion Resistance of Polymeric Coatings Applied on Mg Alloy [Volume 39, Issue 1, 2020, Pages 29-45]
  • Element molybdenum High Temperature Erosion- Oxidation Behavior of Nickel- Based Alloys Containing Mo in Fluidized Bed Waste Incineration [Volume 39, Issue 3, 2020, Pages 41-54]

F

  • Ferrite Effect of Neodymium Dopping on Morphology, Phase and Magnetic Properties of Ni0.7Zn0.3NdxFe2-xO4 Ferrite Nanoparticles Synthesized by Complexing Sol-Gel Method [Volume 39, Issue 2, 2020, Pages 121-136]
  • Fluidized bed incineration High Temperature Erosion- Oxidation Behavior of Nickel- Based Alloys Containing Mo in Fluidized Bed Waste Incineration [Volume 39, Issue 3, 2020, Pages 41-54]

H

  • Hard carbon Synthesis of Hard Carbon- Silicon Nanocomposite as Anode Active Material for Lithium-Ion Batteries [Volume 39, Issue 2, 2020, Pages 1-19]
  • Hardness Investigation of the Effect of Homogenization Treatment on Distribution of Alloying Elements, Microstructure and Hardness of Co-Al-W-Ti-Ta-Base Superalloy [Volume 39, Issue 2, 2020, Pages 103-119]
  • Heat input Effect of Weld Heat Input on Microstructure and Mechanical Properties of Dissimilar Joints of API-B and API-X42 Pipeline Steels [Volume 39, Issue 3, 2020, Pages 55-72]
  • High entropy alloy The Effect of Si and B Addition on the Structural and Magnetic Properties of AlCoCrMnNi High Entropy Alloys [Volume 39, Issue 4, 2020, Pages 131-144]
  • High-temperature erosion-oxidation High Temperature Erosion- Oxidation Behavior of Nickel- Based Alloys Containing Mo in Fluidized Bed Waste Incineration [Volume 39, Issue 3, 2020, Pages 41-54]
  • High temperature oxidation Development of Copper-Ferrite Spinel Coating on AISI 430 Steel Used as Solid Oxide Fuel Cell [Volume 39, Issue 4, 2020, Pages 23-44]
  • Homogenization treatment Investigation of the Effect of Homogenization Treatment on Distribution of Alloying Elements, Microstructure and Hardness of Co-Al-W-Ti-Ta-Base Superalloy [Volume 39, Issue 2, 2020, Pages 103-119]
  • Hot deformation Determining the Hot Deformation Temperature Range of Medium Carbon Ni-Cr-Mo Low Alloy Steels using Hot Tensile and Hot Torsion Tests [Volume 39, Issue 3, 2020, Pages 99-115]
  • Hydrophobicity Investigation of the Effect of Adding Aluminum Trihydrate (ATH) Particles on Electrical and Hydrophobic Properties of Two-Part RTV Silicon Rubber [Volume 39, Issue 3, 2020, Pages 117-128]
  • Hydrotermal Influence of Temperature, Time, pH, Capping Agent Concentration and Zn/Se Molar Ratio on Morphology and Phase Evolution of Zinc Selenide Nanoparticles Synthesized by Hydrothermal Method [Volume 39, Issue 3, 2020, Pages 19-39]

I

  • Intermetallic compounds Evaluating the Effect of the Number of Welding Passes on Microstructure, Hardness and Residual Stress of Ti-Al-Si Composite Coatings [Volume 39, Issue 4, 2020, Pages 1-21]
  • Inverted nano-pyramid Synthesis of the Silicon Inverted Nano- Pyramids and Study of Their Self- Cleaning Behavior [Volume 39, Issue 1, 2020, Pages 47-59]
  • Isothermal solidification Effect of Temperature and Time on the Joint Properties of AISI420 Steel to SAF2507 Steel Produced by Transient Liquid Phase Process [Volume 39, Issue 2, 2020, Pages 65-80]

K

  • Kinetic Oxidation Kinetics of Magnesium Powder Particles in Non-Isothermal Condition [Volume 39, Issue 1, 2020, Pages 75-87]

L

  • Layered double hydroxide Effect of Nanoclay Addition on the Properties of Polycaprolactone Nanocomposite Scaffolds Containing Adipose Derived Mesenchymal Stem Cells used in Soft Tissue Engineering [Volume 39, Issue 4, 2020, Pages 45-59]
  • Lithium ion battery Synthesis of Hard Carbon- Silicon Nanocomposite as Anode Active Material for Lithium-Ion Batteries [Volume 39, Issue 2, 2020, Pages 1-19]

M

  • MAA Influence of Temperature, Time, pH, Capping Agent Concentration and Zn/Se Molar Ratio on Morphology and Phase Evolution of Zinc Selenide Nanoparticles Synthesized by Hydrothermal Method [Volume 39, Issue 3, 2020, Pages 19-39]
  • MACE Synthesis of the Silicon Inverted Nano- Pyramids and Study of Their Self- Cleaning Behavior [Volume 39, Issue 1, 2020, Pages 47-59]
  • Magnesium Effect of Plasma Electrolytic Oxidation Process as a Pretreatment on Corrosion Resistance of Polymeric Coatings Applied on Mg Alloy [Volume 39, Issue 1, 2020, Pages 29-45]
  • Magnesium powder Oxidation Kinetics of Magnesium Powder Particles in Non-Isothermal Condition [Volume 39, Issue 1, 2020, Pages 75-87]
  • Martensitic stainless steel Effect of Temperature and Time on the Joint Properties of AISI420 Steel to SAF2507 Steel Produced by Transient Liquid Phase Process [Volume 39, Issue 2, 2020, Pages 65-80]
  • Mechanism Oxidation Kinetics of Magnesium Powder Particles in Non-Isothermal Condition [Volume 39, Issue 1, 2020, Pages 75-87]
  • Medium Carbon Low alloy Steel Determining the Hot Deformation Temperature Range of Medium Carbon Ni-Cr-Mo Low Alloy Steels using Hot Tensile and Hot Torsion Tests [Volume 39, Issue 3, 2020, Pages 99-115]
  • Microalloying Elements Determining the Hot Deformation Temperature Range of Medium Carbon Ni-Cr-Mo Low Alloy Steels using Hot Tensile and Hot Torsion Tests [Volume 39, Issue 3, 2020, Pages 99-115]
  • Microstruture Effect of Weld Heat Input on Microstructure and Mechanical Properties of Dissimilar Joints of API-B and API-X42 Pipeline Steels [Volume 39, Issue 3, 2020, Pages 55-72]
  • Modified Sol-gel Effect of Different Concentrations of Rosemary Extract on the Phase and Morphology of Zno Nanoparticles and Its Efficiency on Degradation of Methylene Blue Dye [Volume 39, Issue 1, 2020, Pages 89-98]

N

  • Nano-Crystal The Role of Annealing on Properties of Silicon Films Deposited By EB-PVD [Volume 39, Issue 1, 2020, Pages 99-103]
  • Nano photocatalyst Effect of Different Concentrations of Rosemary Extract on the Phase and Morphology of Zno Nanoparticles and Its Efficiency on Degradation of Methylene Blue Dye [Volume 39, Issue 1, 2020, Pages 89-98]
  • Neat fibers and drug loaded fibers Fabrication of Poly (Lactic Acid) Nanofiber Carrier Loaded with Dexamethasone Drug [Volume 39, Issue 2, 2020, Pages 21-34]
  • Neodymium Effect of Neodymium Dopping on Morphology, Phase and Magnetic Properties of Ni0.7Zn0.3NdxFe2-xO4 Ferrite Nanoparticles Synthesized by Complexing Sol-Gel Method [Volume 39, Issue 2, 2020, Pages 121-136]
  • Nerve guide conduit Fabrication of Nerve Guide Conduit Based on 3D Graphene/ Polymer for Nerve Tissue Engineering [Volume 39, Issue 1, 2020, Pages 61-73]
  • Ni-based alloy High Temperature Erosion- Oxidation Behavior of Nickel- Based Alloys Containing Mo in Fluidized Bed Waste Incineration [Volume 39, Issue 3, 2020, Pages 41-54]
  • Nickel Production of W-Cu-Ni Alloy and Cu Bimetal by SPS Process and Analysis of Process Parameters [Volume 39, Issue 4, 2020, Pages 61-76]
  • Ni-Zn ferrite Effect of Neodymium Dopping on Morphology, Phase and Magnetic Properties of Ni0.7Zn0.3NdxFe2-xO4 Ferrite Nanoparticles Synthesized by Complexing Sol-Gel Method [Volume 39, Issue 2, 2020, Pages 121-136]
  • Non-isothermal analysis Oxidation Kinetics of Magnesium Powder Particles in Non-Isothermal Condition [Volume 39, Issue 1, 2020, Pages 75-87]
  • Non-Recrystallization Temperature Determining the Hot Deformation Temperature Range of Medium Carbon Ni-Cr-Mo Low Alloy Steels using Hot Tensile and Hot Torsion Tests [Volume 39, Issue 3, 2020, Pages 99-115]
  • Novel co-based superalloy Investigation of the Effect of Homogenization Treatment on Distribution of Alloying Elements, Microstructure and Hardness of Co-Al-W-Ti-Ta-Base Superalloy [Volume 39, Issue 2, 2020, Pages 103-119]

O

  • Oxidation Oxidation Kinetics of Magnesium Powder Particles in Non-Isothermal Condition [Volume 39, Issue 1, 2020, Pages 75-87]

P

  • PCL Fabrication of Nerve Guide Conduit Based on 3D Graphene/ Polymer for Nerve Tissue Engineering [Volume 39, Issue 1, 2020, Pages 61-73]
  • Pipeline steels Effect of Weld Heat Input on Microstructure and Mechanical Properties of Dissimilar Joints of API-B and API-X42 Pipeline Steels [Volume 39, Issue 3, 2020, Pages 55-72]
  • Plasma electrolytic oxidation coating Effect of Plasma Electrolytic Oxidation Process as a Pretreatment on Corrosion Resistance of Polymeric Coatings Applied on Mg Alloy [Volume 39, Issue 1, 2020, Pages 29-45]
  • Polycaprolactone Effect of Nanoclay Addition on the Properties of Polycaprolactone Nanocomposite Scaffolds Containing Adipose Derived Mesenchymal Stem Cells used in Soft Tissue Engineering [Volume 39, Issue 4, 2020, Pages 45-59]
  • Poly (lactic acid) Fabrication of Poly (Lactic Acid) Nanofiber Carrier Loaded with Dexamethasone Drug [Volume 39, Issue 2, 2020, Pages 21-34]
  • Polymer coating Effect of Plasma Electrolytic Oxidation Process as a Pretreatment on Corrosion Resistance of Polymeric Coatings Applied on Mg Alloy [Volume 39, Issue 1, 2020, Pages 29-45]
  • Pressureless sintering Pressureless Sintering & Mechanical & Thermal Properties of ZrB2-ZrC-SiC Nanocomposite [Volume 39, Issue 4, 2020, Pages 115-129]
  • Protective coatings Development of Copper-Ferrite Spinel Coating on AISI 430 Steel Used as Solid Oxide Fuel Cell [Volume 39, Issue 4, 2020, Pages 23-44]
  • PWA1483 Evaluating the Effect of Ta/W Ratio on Microstructure and Stress Rupture Properties of Ni-Based Single Crystal Superalloy PWA1483 [Volume 39, Issue 3, 2020, Pages 1-18]

R

  • Residual stress Evaluating the Effect of the Number of Welding Passes on Microstructure, Hardness and Residual Stress of Ti-Al-Si Composite Coatings [Volume 39, Issue 4, 2020, Pages 1-21]
  • Rosemary extract Effect of Different Concentrations of Rosemary Extract on the Phase and Morphology of Zno Nanoparticles and Its Efficiency on Degradation of Methylene Blue Dye [Volume 39, Issue 1, 2020, Pages 89-98]

S

  • Scaffold Effect of Nanoclay Addition on the Properties of Polycaprolactone Nanocomposite Scaffolds Containing Adipose Derived Mesenchymal Stem Cells used in Soft Tissue Engineering [Volume 39, Issue 4, 2020, Pages 45-59]
  • Scaffold Fabrication and Characterization of Polycaprolactone – Zeolite Y Nanocomposite for Bone Tissue Engineering [Volume 39, Issue 4, 2020, Pages 77-94]
  • Self-cleaning Synthesis of the Silicon Inverted Nano- Pyramids and Study of Their Self- Cleaning Behavior [Volume 39, Issue 1, 2020, Pages 47-59]
  • Semi-solid casting Morphological and Thermal Flux Analysis in as-Cast Al Alloy after Swarf Addition [Volume 39, Issue 4, 2020, Pages 95-113]
  • Serrated flow Effect of Temperature and Strain Rate on Plastic Deformation Behavior of Zr46(Cu4.5/5.5Ag1/5.5)46Al8 Bulk Metallic Glass [Volume 39, Issue 3, 2020, Pages 129-140]
  • Shear transformation zone Effect of Temperature and Strain Rate on Plastic Deformation Behavior of Zr46(Cu4.5/5.5Ag1/5.5)46Al8 Bulk Metallic Glass [Volume 39, Issue 3, 2020, Pages 129-140]
  • Si) The Effect of Si and B Addition on the Structural and Magnetic Properties of AlCoCrMnNi High Entropy Alloys [Volume 39, Issue 4, 2020, Pages 131-144]
  • Silicon rubber (RTV) Investigation of the Effect of Adding Aluminum Trihydrate (ATH) Particles on Electrical and Hydrophobic Properties of Two-Part RTV Silicon Rubber [Volume 39, Issue 3, 2020, Pages 117-128]
  • Single crystal Ni-based superalloy Evaluating the Effect of Ta/W Ratio on Microstructure and Stress Rupture Properties of Ni-Based Single Crystal Superalloy PWA1483 [Volume 39, Issue 3, 2020, Pages 1-18]
  • Soft tissue engineering Effect of Nanoclay Addition on the Properties of Polycaprolactone Nanocomposite Scaffolds Containing Adipose Derived Mesenchymal Stem Cells used in Soft Tissue Engineering [Volume 39, Issue 4, 2020, Pages 45-59]
  • Sol-gel Effect of Amorphous Silica Addition on Martensitic Phase Transformation of Zirconia and Investigation of its Tetragonal Structure Stability Mechanisms [Volume 39, Issue 2, 2020, Pages 49-63]
  • Sol-Gel autocombustion Structural, Magnetic and Acetone Sensing Properties of Barium- Calcium Hexaferrite Synthesized by Sol- Gel Auto Combustion Method [Volume 39, Issue 1, 2020, Pages 13-27]
  • Solid Solution The Effect of Si and B Addition on the Structural and Magnetic Properties of AlCoCrMnNi High Entropy Alloys [Volume 39, Issue 4, 2020, Pages 131-144]
  • Spark Synthesis of Zinc/Zinc Oxide Nanoparticles by Electric Discharge Method in Distilled-Water and Argon-Gas Environments [Volume 39, Issue 2, 2020, Pages 35-48]
  • Spark plasma sintering Production of W-Cu-Ni Alloy and Cu Bimetal by SPS Process and Analysis of Process Parameters [Volume 39, Issue 4, 2020, Pages 61-76]
  • Spinel oxides Development of Copper-Ferrite Spinel Coating on AISI 430 Steel Used as Solid Oxide Fuel Cell [Volume 39, Issue 4, 2020, Pages 23-44]
  • Strain rate sensitivity Effect of Temperature and Strain Rate on Plastic Deformation Behavior of Zr46(Cu4.5/5.5Ag1/5.5)46Al8 Bulk Metallic Glass [Volume 39, Issue 3, 2020, Pages 129-140]
  • Stress rupture properties Evaluating the Effect of Ta/W Ratio on Microstructure and Stress Rupture Properties of Ni-Based Single Crystal Superalloy PWA1483 [Volume 39, Issue 3, 2020, Pages 1-18]
  • Structural relaxation Effect of Temperature and Strain Rate on Plastic Deformation Behavior of Zr46(Cu4.5/5.5Ag1/5.5)46Al8 Bulk Metallic Glass [Volume 39, Issue 3, 2020, Pages 129-140]
  • Super-duplex stainless steel Effect of Temperature and Time on the Joint Properties of AISI420 Steel to SAF2507 Steel Produced by Transient Liquid Phase Process [Volume 39, Issue 2, 2020, Pages 65-80]
  • Surface morphology The Role of Annealing on Properties of Silicon Films Deposited By EB-PVD [Volume 39, Issue 1, 2020, Pages 99-103]
  • Synthesis of barium-calcium ferrite Structural, Magnetic and Acetone Sensing Properties of Barium- Calcium Hexaferrite Synthesized by Sol- Gel Auto Combustion Method [Volume 39, Issue 1, 2020, Pages 13-27]

T

  • Ta/W ratio Evaluating the Effect of Ta/W Ratio on Microstructure and Stress Rupture Properties of Ni-Based Single Crystal Superalloy PWA1483 [Volume 39, Issue 3, 2020, Pages 1-18]
  • TCP phases Evaluating the Effect of Ta/W Ratio on Microstructure and Stress Rupture Properties of Ni-Based Single Crystal Superalloy PWA1483 [Volume 39, Issue 3, 2020, Pages 1-18]
  • Tensile shear strength Effect of Temperature and Time on the Joint Properties of AISI420 Steel to SAF2507 Steel Produced by Transient Liquid Phase Process [Volume 39, Issue 2, 2020, Pages 65-80]
  • TIG process Development of Al-Ti-N Composite Coatings on Commercially Pure Ti Surface by Tungsten Inert Gas Process [Volume 39, Issue 3, 2020, Pages 73-98]
  • TIG process Evaluating the Effect of the Number of Welding Passes on Microstructure, Hardness and Residual Stress of Ti-Al-Si Composite Coatings [Volume 39, Issue 4, 2020, Pages 1-21]
  • Tissue engineering Effect of Nanoclay Addition on the Properties of Polycaprolactone Nanocomposite Scaffolds Containing Adipose Derived Mesenchymal Stem Cells used in Soft Tissue Engineering [Volume 39, Issue 4, 2020, Pages 45-59]
  • Tissue engineering Fabrication and Characterization of Polycaprolactone – Zeolite Y Nanocomposite for Bone Tissue Engineering [Volume 39, Issue 4, 2020, Pages 77-94]
  • TLP bonding Effect of Temperature and Time on the Joint Properties of AISI420 Steel to SAF2507 Steel Produced by Transient Liquid Phase Process [Volume 39, Issue 2, 2020, Pages 65-80]
  • Triethanolamine Effect of Neodymium Dopping on Morphology, Phase and Magnetic Properties of Ni0.7Zn0.3NdxFe2-xO4 Ferrite Nanoparticles Synthesized by Complexing Sol-Gel Method [Volume 39, Issue 2, 2020, Pages 121-136]
  • Tungsten Production of W-Cu-Ni Alloy and Cu Bimetal by SPS Process and Analysis of Process Parameters [Volume 39, Issue 4, 2020, Pages 61-76]

U

  • Ultra high temperature ceramics Pressureless Sintering & Mechanical & Thermal Properties of ZrB2-ZrC-SiC Nanocomposite [Volume 39, Issue 4, 2020, Pages 115-129]

W

  • Welding Effect of Weld Heat Input on Microstructure and Mechanical Properties of Dissimilar Joints of API-B and API-X42 Pipeline Steels [Volume 39, Issue 3, 2020, Pages 55-72]

Z

  • Zeolite Fabrication and Characterization of Polycaprolactone – Zeolite Y Nanocomposite for Bone Tissue Engineering [Volume 39, Issue 4, 2020, Pages 77-94]
  • Zinc selenide nanoparticles Influence of Temperature, Time, pH, Capping Agent Concentration and Zn/Se Molar Ratio on Morphology and Phase Evolution of Zinc Selenide Nanoparticles Synthesized by Hydrothermal Method [Volume 39, Issue 3, 2020, Pages 19-39]
  • ZnO nanoparticles Effect of Different Concentrations of Rosemary Extract on the Phase and Morphology of Zno Nanoparticles and Its Efficiency on Degradation of Methylene Blue Dye [Volume 39, Issue 1, 2020, Pages 89-98]
  • ZrB2 Pressureless Sintering & Mechanical & Thermal Properties of ZrB2-ZrC-SiC Nanocomposite [Volume 39, Issue 4, 2020, Pages 115-129]
  • ZrC Pressureless Sintering & Mechanical & Thermal Properties of ZrB2-ZrC-SiC Nanocomposite [Volume 39, Issue 4, 2020, Pages 115-129]

تحت نظارت وف ایرانی